Prev: [050/200] USB: EHCI: fix controller wakeup flag settings during suspend
Next: [064/200] mac80211: fix handling of 4-address-mode in ieee80211_change_iface
From: Greg KH on 1 Jul 2010 18:00 2.6.34-stable review patch. If anyone has any objections, please let me know. ------------------ From: Alek Du <alek.du(a)intel.com> commit eab80de01cb398419ef3305f35abcb367c647c8b upstream. This is a bug fix for PHCD (phy clock disable) low power feature: After PHCD is set, any write to PORTSC register is illegal, so when resume ports, clear PHCD bit first. Signed-off-by: Alek Du <alek.du(a)intel.com> Cc: David Brownell <dbrownell(a)users.sourceforge.net> Cc: Alan Stern <stern(a)rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh(a)suse.de> --- drivers/usb/host/ehci-hub.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -294,6 +294,16 @@ static int ehci_bus_resume (struct usb_h /* manually resume the ports we suspended during bus_suspend() */ i = HCS_N_PORTS (ehci->hcs_params); while (i--) { + /* clear phy low power mode before resume */ + if (ehci->has_hostpc) { + u32 __iomem *hostpc_reg = + (u32 __iomem *)((u8 *)ehci->regs + + HOSTPC0 + 4 * (i & 0xff)); + temp = ehci_readl(ehci, hostpc_reg); + ehci_writel(ehci, temp & ~HOSTPC_PHCD, + hostpc_reg); + mdelay(5); + } temp = ehci_readl(ehci, &ehci->regs->port_status [i]); temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); if (test_bit(i, &ehci->bus_suspended) && @@ -678,6 +688,13 @@ static int ehci_hub_control ( if (temp & PORT_SUSPEND) { if ((temp & PORT_PE) == 0) goto error; + /* clear phy low power mode before resume */ + if (hostpc_reg) { + temp1 = ehci_readl(ehci, hostpc_reg); + ehci_writel(ehci, temp1 & ~HOSTPC_PHCD, + hostpc_reg); + mdelay(5); + } /* resume signaling for 20 msec */ temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); ehci_writel(ehci, temp | PORT_RESUME, -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ |