Prev: [00/36] 2.6.34.3-stable review
Next: [29/36] drm/radeon: add new pci ids
From: Greg KH on 6 Aug 2010 15:40
2.6.34-stable review patch. If anyone has any objections, please let us know.

------------------

From: Felix Fietkau <nbd(a)openwrt.org>

commit f860d526eb2939a1c37128900b5af2b6f3ff7f20 upstream.

When issuing a reset, the TSF value is lost in the hardware because of
the 913x specific cold reset. As with some AR9280 cards, the TSF needs
to be preserved in software here.

Additionally, there's an issue that frequently prevents a successful
TSF write directly after the chip reset. In this case, repeating the
TSF write after the initval-writes usually works.

This patch detects failed TSF writes and recovers from them, taking
into account the delay caused by the initval writes.

Signed-off-by: Felix Fietkau <nbd(a)openwrt.org>
Reported-by: Björn Smedman <bjorn.smedman(a)venatech.se>
Signed-off-by: John W. Linville <linville(a)tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)suse.de>

---
drivers/net/wireless/ath/ath9k/hw.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1956,7 +1956,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
macStaId1 = REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_BASE_RATE_11B;

/* For chips on which RTC reset is done, save TSF before it gets cleared */
- if (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+ if (AR_SREV_9100(ah) ||
+ (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL)))
tsf = ath9k_hw_gettsf64(ah);

saveLedState = REG_READ(ah, AR_CFG_LED) &
@@ -1986,7 +1987,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
}

/* Restore TSF */
- if (tsf && AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+ if (tsf)
ath9k_hw_settsf64(ah, tsf);

if (AR_SREV_9280_10_OR_LATER(ah))
@@ -2006,6 +2007,17 @@ int ath9k_hw_reset(struct ath_hw *ah, st
if (r)
return r;

+ /*
+ * Some AR91xx SoC devices frequently fail to accept TSF writes
+ * right after the chip reset. When that happens, write a new
+ * value after the initvals have been applied, with an offset
+ * based on measured time difference
+ */
+ if (AR_SREV_9100(ah) && (ath9k_hw_gettsf64(ah) < tsf)) {
+ tsf += 1500;
+ ath9k_hw_settsf64(ah, tsf);
+ }
+
/* Setup MFP options for CCMP */
if (AR_SREV_9280_20_OR_LATER(ah)) {
/* Mask Retry(b11), PwrMgt(b12), MoreData(b13) to 0 in mgmt


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: [00/36] 2.6.34.3-stable review
Next: [29/36] drm/radeon: add new pci ids