Prev: Failing Phase2 Auth - IPSec - All IPSec SA proposals found unacceptable
Next: Source IP address
From: peter.wonderboy on 3 Dec 2008 03:29
Phillipe this Firmware you mention is not available on the public FTP
site yet - do you have a copy you can email or post on an FTP site?

Thanks

On Dec 2, 6:24 am, Philippe <elipsia2...(a)yahoo.fr> wrote:
> In article <elipsia2001-917C5E.07262901122...(a)news.orange.fr>,
>
>  Philippe <elipsia2...(a)yahoo.fr> wrote:
> > In article
> > <63474e00-a415-45e0-8a53-e9c43e1c5...(a)3g2000yqs.googlegroups.com>,
> >  bod43 <Bo...(a)hotmail.co.uk> wrote:
>
> > > You NEED to check with "sh dsl int atm 0".
>
> Firmware before update :
> Init FW:        init_AMR-3.0.014_no_bist.bin
> Operation FW:   AMR-3.0.014.bin
> FW Source:      embedded
> FW Version:     3.0.14
>
> Firmware after update and reload :
> Init FW:        init_AMR-4.0.015.bin
> Operation FW:   AMR-4.0.015.bin
> FW Source:      external
> FW Version:     4.0.15
>
> So, it works :)
>
> Regards,
>
> Philippe.

From: bod43 on 3 Dec 2008 14:03
On 3 Dec, 08:29, peter.wonder...(a)googlemail.com wrote:
> Phillipe this Firmware you mention is not available on the public FTP
> site yet - do you have a copy you can email or post on an FTP site?
>
> Thanks
>

As mentioned the other day -
ftp://ftp.cisco.com/pub/access/800/
First  |  Prev  | 
Pages: 1 2
Prev: Failing Phase2 Auth - IPSec - All IPSec SA proposals found unacceptable
Next: Source IP address