AP 1200
in [Cisco]
|
From: Andy on 28 Oct 2006 13:53 Hi Brian, the problem is that i can not acces the AP neither through the CLI, nor the HTTP to download any image, so i used the MODE button to download an image i have from another AP (tar file), and still the same problem it is not booting even to the rommon (ap:), i tried the escape key as well to go to the rommon and it is not working. Simply It keeps reloading, appreciate ur help.
From: Brian V on 28 Oct 2006 15:04 "Andy" <dandashi(a)hotmail.com> wrote in message news:1162058006.009961.216130(a)k70g2000cwa.googlegroups.com... > Hi Brian, > the problem is that i can not acces the AP neither through the CLI, nor > the HTTP to download any image, so i used the MODE button to download > an image i have from another AP (tar file), and still the same problem > it is not booting even to the rommon (ap:), i tried the escape key as > well to go to the rommon and it is not working. Simply It keeps > reloading, appreciate ur help. > Are you re-naming the image to the required name? Are you setting the IP on your PC to the required? Is the TFTP server on the local PC running? Is the TFTP server showing the image as being downloaded? Please make sure you quote the thread as you reply, it makes it very difficult to follow the thread and give you the appropriate advise.
From: Andy on 28 Oct 2006 22:18 yes i am sure. i did all that.
First
|
Prev
|
Pages: 1 2 Prev: The remote peer is no longer responding Next: Cisco 877(W) on a BT A-DSL line |