Prev: Can't Type in Forms on Internet
Next: svchost.exe with rasman.dll uses up cpu
From: Silvio Galli on 26 May 2010 16:47
I am running Vista Home Premium SP2 and few days ago I added a new
graphic board. I also installed some new software and my system became
very slow. The system worked well and fast for just 30-40 seconds and
then freezed for 2-3 minutes with the windows of the application
saying "Non responding" ("Non risponde" in italian)

I was not able to understand the cause of the problem, so I decided to
reinstall from scratch.

I now have a system where Vista is just reinstalled with all the
current updates. I didn't see any problem related to the updates
installation.
But still I see from time to time some windows "Non Respondig"

On the system I have installed the drivers of the new graphic board. I
don't see any error or conflict of the boards. I had tried to run both
boards with two videos: it was funny and it worked.
Now I have disabled the original board that is on the mother board,
but with this board enabled or not, it doesn't make any difference.

On the system I have now installed only Firefox, Kaspersky 9 and Adobe
Reader. So it should be a very light system. Still I have some freezes
that became more severe while I was installing these few softwares or
while I was scanning the system for viruses.

I have just 2 Gb of RAM, but the system was working well before the
installation of the new graphic board, and at that time it was really
overlaoded with application, including the same Kaspersky 9, Firefox
and Adobe Reader plus many others.

How can I check if it is a problem of conflict of Graphic board, RAM,
conflict between some Windows updates and my applications or failure
of some other component?

Could somebody advise me on some diagnostic tool or process to follow?

Thanks in advance,
Silvio
From: Tom Willett on 26 May 2010 16:53
Would it not make sense to post a Vista question to a Vista newsgroup
instead of Windows XP newsgroup?

"Silvio Galli" <silviogalli(a)libero.it> wrote in message
news:mp0rv5939obiismqqnmjv4t5une69tr58b(a)4ax.com...
:I am running Vista Home Premium SP2 and few days ago I added a new
: graphic board. I also installed some new software and my system became
: very slow. The system worked well and fast for just 30-40 seconds and
: then freezed for 2-3 minutes with the windows of the application
: saying "Non responding" ("Non risponde" in italian)
:
: I was not able to understand the cause of the problem, so I decided to
: reinstall from scratch.
:
: I now have a system where Vista is just reinstalled with all the
: current updates. I didn't see any problem related to the updates
: installation.
: But still I see from time to time some windows "Non Respondig"
:
: On the system I have installed the drivers of the new graphic board. I
: don't see any error or conflict of the boards. I had tried to run both
: boards with two videos: it was funny and it worked.
: Now I have disabled the original board that is on the mother board,
: but with this board enabled or not, it doesn't make any difference.
:
: On the system I have now installed only Firefox, Kaspersky 9 and Adobe
: Reader. So it should be a very light system. Still I have some freezes
: that became more severe while I was installing these few softwares or
: while I was scanning the system for viruses.
:
: I have just 2 Gb of RAM, but the system was working well before the
: installation of the new graphic board, and at that time it was really
: overlaoded with application, including the same Kaspersky 9, Firefox
: and Adobe Reader plus many others.
:
: How can I check if it is a problem of conflict of Graphic board, RAM,
: conflict between some Windows updates and my applications or failure
: of some other component?
:
: Could somebody advise me on some diagnostic tool or process to follow?
:
: Thanks in advance,
: Silvio


From: Al on 26 May 2010 22:25
Silvio - Note from your post " am running Vista Home Premium SP2 and few
days ago I added a new graphic board. I also installed some new software and
my system became very slow...." - first logical troubleshooting step would
have been to run "System Restore" (of no value now) to reverse effects of
installing new board and software.

What is the "not responding" application? Use Task manager to what process
is "hogging" CPU utilization.

From: Silvio Galli on 27 May 2010 02:35
On Wed, 26 May 2010 22:25:38 -0400, "Al" <ajrjdr(a)comcast.net> wrote:

>What is the "not responding" application? Use Task manager to what process
>is "hogging" CPU utilization.

Anyone from time to time. It could be an Explorer window, a Firefox
refreshing, even the Task manager may freeze for few seconds
In Task manager I don't notice high CPU usage: I see an overall use of
maximun 30% and the single applicaltion load up to 10%.
If I run Resource Monitor, I see moments of 100% usage and heavy disk
access, probably swapping, but I cannot detect which application is
the culprit.

I have also seen the other post asking me to move on a Vista forum: do
you want that I move the thread or can we continue here?

Silvio
From: Chuck on 1 Jun 2010 03:13
On 5/26/2010 4:47 PM, Silvio Galli wrote:
> I am running Vista Home Premium SP2 and few days ago I added a new
> graphic board. I also installed some new software and my system became
> very slow. The system worked well and fast for just 30-40 seconds and
> then freezed for 2-3 minutes with the windows of the application
> saying "Non responding" ("Non risponde" in italian)
>
> I was not able to understand the cause of the problem, so I decided to
> reinstall from scratch.
>
> I now have a system where Vista is just reinstalled with all the
> current updates. I didn't see any problem related to the updates
> installation.
> But still I see from time to time some windows "Non Respondig"
>
> On the system I have installed the drivers of the new graphic board. I
> don't see any error or conflict of the boards. I had tried to run both
> boards with two videos: it was funny and it worked.
> Now I have disabled the original board that is on the mother board,
> but with this board enabled or not, it doesn't make any difference.
>
> On the system I have now installed only Firefox, Kaspersky 9 and Adobe
> Reader. So it should be a very light system. Still I have some freezes
> that became more severe while I was installing these few softwares or
> while I was scanning the system for viruses.
>
> I have just 2 Gb of RAM, but the system was working well before the
> installation of the new graphic board, and at that time it was really
> overlaoded with application, including the same Kaspersky 9, Firefox
> and Adobe Reader plus many others.
>
> How can I check if it is a problem of conflict of Graphic board, RAM,
> conflict between some Windows updates and my applications or failure
> of some other component?
>
> Could somebody advise me on some diagnostic tool or process to follow?
>
> Thanks in advance,
> Silvio

The general logic is to return the system to the hardware configuration
before the slowdown. This will involve re enabling the on board graphics
chip, shutting down, and removing the added graphics card.

What was the graphics card make and model, and what is the rated wattage
of the power supply?

Certain versions of Firefox have caused or were related to slowdown/not
responding problems on one of my systems (Laptop, Vista Ultimate)

In a few cases, utilities supplied with graphics cards have
compatibility problems, and can slow a system down.

Try turning Aero off, along with most of the fancy whistles and bells,
and use windows "classic".

Some "off the shelf" Desktop systems have a power supply that is not
adequate for the current crop of medium to high end video cards. This
can cause a video card or the whole computer to fail in some manner.
 | 
Pages: 1
Prev: Can't Type in Forms on Internet
Next: svchost.exe with rasman.dll uses up cpu