Ceramic Emitter resistor packs UK
in [Repair]
|
From: Mark Zacharias on 7 Apr 2010 20:30 "Tim Schwartz" <tim(a)bristolnj.com> wrote in message news:4BBC737D.1020201(a)bristolnj.com... > On 4/6/2010 6:34 PM, Gareth Magennis wrote: >> Hi, >> >> >> anyone know a source for those dual 5 watt white ceramic Emitter Resistor >> packs you find in EV P3000,s Dynacord Powermates etc? >> >> They are the thin rectangular ones with 3 legs. I need some for a >> Powermate which are 0.22 ohms. I usually get the 0.33 and 0.47 EV >> versions >> from Shuttlesound, but Dynacord seem to use 0.22, which I can only get >> from >> Beyer Dynamic at rather extortionate cost, (�15 a pair all in) and they >> are >> out of stock anyway. >> >> I can't bodge anything else into the Powermate as they have to sit >> between >> the heatsink and the metal housing for the fan and airguides - the >> typical >> 10mm square 5 Watt ceramics will not fit. Bummer. >> >> I have found a couple of single versions of these in my components boxes >> of the same width >> (5mm) and half the length which I believe I got from Yamaha. So a source >> of >> these would be a possible alternative. >> >> >> >> >> Cheers, >> >> >> >> >> Gareth. >> >> >> > Gareth, > > I know you asked for a UK vendor, but MCM Electronics > (www.mcmelectronics.com) in the USA has them as part number 28-0540 for > $2.09 each. While shipping might be expensive, it might be worth it if > you need a half dozen or so. > > Regards, > Tim Schwartz > Bristol Electronics > Every time I scrap out a Sony surround receiver I get 4 or 5 of these. They add up fast. Mark Z. |