Prev: AP 1200
Next: Aironet 1200 sntp sync problem
From: Matthias Scheler on 6 Nov 2006 15:37
In article <1162801615.024078.108370(a)f16g2000cwb.googlegroups.com>,
peter.wonderboy(a)googlemail.com writes:
> You can get the latest ADSL firmware for 800 series direct from
> Cisco's FTP site:
[...]

That was a great hint. Thanks a lot! I've update the firmware for
the ADSL modem from 2.5.42 to 3.0.1 and things look much better now:

ATM0
Alcatel 20190 chipset information
ATU-R (DS) ATU-C (US)
Modem Status: Showtime (DMTDSL_SHOWTIME)
DSL Mode: ITU G.992.1 (G.DMT) Annex A
[...]
Capacity Used: 79% 97%
Noise Margin: 11.0 dB 6.0 dB
Output Power: 14.5 dBm 12.0 dBm
Attenuation: 7.0 dB 4.0 dB
[...]
Interleave Fast Interleave Fast
Speed (kbps): 0 8128 0 768
Cells: 0 509117 0 1468564
Reed-Solomon EC: 0 0 0 0
CRC Errors: 0 8 0 0
Header Errors: 0 0 0 0
Total BER: 0E-0 1176E-11
Leakage Avarage BER: 0E-0 1176E-11

I had lots and lots of errors previously while I onlt got 8 in several
minutes now. And there's noise on the phone line either. And network
performance looks good, too:

ttcp-t: 1835008 bytes in 2.19 real seconds = 819.66 KB/sec +++

Kind regards

--
Matthias Scheler http://zhadum.org.uk/
First  |  Prev  | 
Pages: 1 2 3
Prev: AP 1200
Next: Aironet 1200 sntp sync problem