Prev: Crystal Reports error code 1603 running deployment on a vista mach
Next: Deserialization issue
From: Ciaran O''Donnell on 19 Sep 2008 08:00
Sorry, this was supposed to be for a different thread
--
Ciaran O''Donnell
http://wannabedeveloper.spaces.live.com


"Ciaran O''Donnell" wrote:

> On reflection, you could possibly make the app a self extracting zip file
> which extracts the EXE and a settings file and then starts the app, then when
> you app closes, it can repack the settings file and itself into the exe. You
> would probably want a tool for this bit which could be in the zip too.
> So the app isnt single exe when running but when not running, it is.
> Just an idea for you to think about.
> Another option would possibly be to figure out whether you can access any
> part of the exe file directly and modify some of it. Possibly add a few bytes
> at the end which you can treat as structure storage and write the settings
> to. I dont remember if the framework will checksum the exe when it loads it
> or if this only happens for strong named assemblies.
>
>
>
> --
> Ciaran O''Donnell
> http://wannabedeveloper.spaces.live.com
>
>
> "Claire" wrote:
>
> > Hi,
> > I'm trying to test a deployment of my application on a Vista enterprise
> > machine
> > The deployment project was built within Visual Studio 2008
> > One of its prerequisites is that Crystal Reports basic that comes with VS is
> > installed, and this is installed from the local machine.
> > On my "cleanish" vista pc, setup detects that Crystal reports is not
> > installed so attempts to install it for me.
> > After a few seconds, installation of Crystal Reports fails with error code
> > 1603.
> > I'm running setup as administrator.
> >
> > The following is a copy of the log file produced.
> > Anyone any ideas as to what it going wrong here and how i can fix it please?
> >
> > Claire
> >
> > The following properties have been set:
> > Property: [AdminUser] = true {boolean}
> > Property: [ProcessorArchitecture] = Intel {string}
> > Property: [VersionNT] = 6.0.1 {version}
> > Running checks for package '.NET Framework 2.0 (x86)', phase BuildList
> > Running external check with command
> > 'C:\Users\Claire\AppData\Local\Temp\VSD67F6.tmp\DotNetFX\dotnetchk.exe' and
> > parameters ''
> > Process exited with code 1
> > Setting value '1 {int}' for property 'DotNetInstalled'
> > Reading value 'Version' of registry key 'HKLM\Software\Microsoft\Internet
> > Explorer'
> > Read string value '7.0.6001.18000'
> > Setting value '7.0.6001.18000 {string}' for property 'IEVersion'
> > The following properties have been set for package '.NET Framework 2.0
> > (x86)':
> > Property: [DotNetInstalled] = 1 {int}
> > Property: [IEVersion] = 7.0.6001.18000 {string}
> > Running checks for command 'DotNetFX\instmsia.exe'
> > Result of running operator 'ValueExists' on property 'VersionNT': true
> > Result of checks for command 'DotNetFX\instmsia.exe' is 'Bypass'
> > Running checks for command 'DotNetFX\WindowsInstaller-KB893803-v2-x86.exe'
> > Result of running operator 'ValueExists' on property 'Version9x': false
> > Result of running operator 'VersionLessThan' on property 'VersionNT' and
> > value '5.0.3': false
> > Result of running operator 'VersionGreaterThanOrEqualTo' on property
> > 'VersionMsi' and value '3.0': true
> > Result of checks for command 'DotNetFX\WindowsInstaller-KB893803-v2-x86.exe'
> > is 'Bypass'
> > Running checks for command 'DotNetFX\dotnetfx.exe'
> > Result of running operator 'ValueNotEqualTo' on property 'DotNetInstalled'
> > and value '0': true
> > Result of checks for command 'DotNetFX\dotnetfx.exe' is 'Bypass'
> > '.NET Framework 2.0 (x86)' RunCheck result: No Install Needed
> > Running checks for package 'Crystal Reports Basic for Visual Studio 2008
> > (x86, x64)', phase BuildList
> > Running MsiProductCheck with ProductCode
> > '{AA467959-A1D6-4F45-90CD-11DC57733F32}'
> > MsiQueryProductState returned '-1'
> > Setting value '-1 {int}' for property 'CRVSInstalled'
> > Running MsiProductCheck with ProductCode
> > '{CE26F10F-C80F-4377-908B-1B7882AE2CE3}'
> > MsiQueryProductState returned '-1'
> > Setting value '-1 {int}' for property 'CRVSRunTimex86Installed'
> > Running MsiProductCheck with ProductCode
> > '{2BFA9B05-7418-4EDE-A6FC-620427BAAAA3}. '
> > MsiQueryProductState returned '-2'
> > Setting value '-2 {int}' for property 'CRVSRunTimex64Installed'
> > The following properties have been set for package 'Crystal Reports Basic
> > for Visual Studio 2008 (x86, x64)':
> > Property: [CRVSInstalled] = -1 {int}
> > Property: [CRVSRunTimex64Installed] = -2 {int}
> > Property: [CRVSRunTimex86Installed] = -1 {int}
> > Running checks for command 'CrystalReports10_5\CRRedist2008_x86.msi'
> > Result of running operator 'ValueNotEqualTo' on property
> > 'ProcessorArchitecture' and value 'Intel': false
> > Result of running operator 'ValueGreaterThan' on property 'CRVSInstalled'
> > and value '0': false
> > Result of running operator 'ValueGreaterThan' on property
> > 'CRVSRunTimex86Installed' and value '0': false
> > Result of running operator 'ValueEqualTo' on property 'AdminUser' and value
> > 'false': false
> > Skipping FailIf because Property 'Version9x' was not defined
> > Result of running operator 'VersionLessThan' on property 'VersionNT' and
> > value '5.00': false
> > Result of checks for command 'CrystalReports10_5\CRRedist2008_x86.msi' is
> > 'Install'
> > Running checks for command 'CrystalReports10_5\CRRedist2008_x64.msi'
> > Result of running operator 'ValueNotEqualTo' on property
> > 'ProcessorArchitecture' and value 'AMD64': true
> > Result of checks for command 'CrystalReports10_5\CRRedist2008_x64.msi' is
> > 'Bypass'
> > 'Crystal Reports Basic for Visual Studio 2008 (x86, x64)' RunCheck result:
> > Install Needed
> > EULA for components 'Crystal Reports Basic for Visual Studio 2008 (x86,
> > x64)' was accepted.
> > Copying files to temporary directory
> > "C:\Users\Claire\AppData\Local\Temp\VSD67F6.tmp\"
> > Copying from 'C:\Temp\Installer\CrystalReports10_5\CRRedist2008_x86.msi' to
> > 'C:\Users\Claire\AppData\Local\Temp\VSD67F6.tmp\CrystalReports10_5\CRRedist2008_x86.msi'
> > Verifying file integrity of
> > C:\Users\Claire\AppData\Local\Temp\VSD67F6.tmp\CrystalReports10_5\CRRedist2008_x86.msi
> > WinVerifyTrust returned 0
> > File trusted
> > Running checks for package 'Crystal Reports Basic for Visual Studio 2008
> > (x86, x64)', phase BeforePackage
> > Running MsiProductCheck with ProductCode
> > '{AA467959-A1D6-4F45-90CD-11DC57733F32}'
> > MsiQueryProductState returned '-1'
> > Setting value '-1 {int}' for property 'CRVSInstalled'
> > Running MsiProductCheck with ProductCode
> > '{CE26F10F-C80F-4377-908B-1B7882AE2CE3}'
> > MsiQueryProductState returned '-1'
> > Setting value '-1 {int}' for property 'CRVSRunTimex86Installed'
> > Running MsiProductCheck with ProductCode
> > '{2BFA9B05-7418-4EDE-A6FC-620427BAAAA3}. '
> > MsiQueryProductState returned '-2'
> > Setting value '-2 {int}' for property 'CRVSRunTimex64Installed'
> > The following properties have been set for package 'Crystal Reports Basic
> > for Visual Studio 2008 (x86, x64)':
> > Property: [CRVSInstalled] = -1 {int}
> > Property: [CRVSRunTimex64Installed] = -2 {int}
> > Property: [CRVSRunTimex86Installed] = -1 {int}
> > Running checks for command 'CrystalReports10_5\CRRedist2008_x86.msi'
> > Result of running operator 'ValueNotEqualTo' on property
> > 'ProcessorArchitecture' and value 'Intel': false
> > Result of running operator 'ValueGreaterThan' on property 'CRVSInstalled'
> > and value '0': false
> > Result of running operator 'ValueGreaterThan' on property
> > 'CRVSRunTimex86Installed' and value '0': false
> > Result of running operator 'ValueEqualTo' on property 'AdminUser' and value
> > 'false': false
> > Skipping FailIf because Property 'Version9x' was not defined
> > Result of running operator 'VersionLessThan' on property 'VersionNT' and
> > value '5.00': false
> > Result of checks for command 'CrystalReports10_5\CRRedist2008_x86.msi' is
> > 'Install'
> > 'Crystal Reports Basic for Visual Studio 2008 (x86, x64)' RunCheck result:
> > Install Needed
> > Verifying file integrity of
> > C:\Users\Claire\AppData\Local\Temp\VSD67F6.tmp\CrystalReports10_5\CRRedist2008_x86.msi
> > WinVerifyTrust returned 0
> > File trusted
> > Installing using command 'C:\Windows\system32\msiexec.exe' and parameters
> > ' -I
> > "C:\Users\Claire\AppData\Local\Temp\VSD67F6.tmp\CrystalReports10_5\CRRedist2008_x86.msi"
> > -q /norestart'
> > Will attempt to elevate process.
> > Process exited with code 1603
> > Status of package 'Crystal Reports Basic for Visual Studio 2008 (x86, x64)'
> > after install is 'InstallFailed'
> >
 | 
Pages: 1
Prev: Crystal Reports error code 1603 running deployment on a vista mach
Next: Deserialization issue