EFI boot on x86 fails in .32
in [Kernel]
|
Prev: [REGRESSION] EFI boot on x86 fails in .32
Next: serial port 8250 messed up after coverting from little endian to big endian on kernel 2.6.31
From: Matthew Garrett on 19 Oct 2009 23:10 This seems to be caused by 7bd867dfb4e0357e06a3211ab2bd0e714110def3 - reverting that results in a booting kernel. Can't say I understand how or why, but... On Tue, Oct 20, 2009 at 01:34:00AM +0100, Matthew Garrett wrote: > 2.6.32-rc5 (and some earlier git checkout I had) fail to boot on my HP > 2530p when using EFI - they boot fine with the BIOS emulation instead. I > get an early exception when print_efi_memmap() is called, which implies > that the memory map is broken somehow. Here's the dmesg for a working > boot: > > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Linux version 2.6.30.8-64.fc11.x86_64 (mockbuild(a)x86-5.fedora.phx.redhat.com) (gcc version 4.4.1 20090725 (Red Hat 4.4.1-2) (GCC) ) #1 SMP Fri Sep 25 04:43:32 EDT 2009 > Command line: ro root=UUID=fd334e23-080a-449d-8993-07758e5cd581 rhgb quiet > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > Centaur CentaurHauls > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > BIOS-e820: 0000000000100000 - 0000000075a4c000 (usable) > BIOS-e820: 0000000075a4c000 - 0000000075a4e000 (reserved) > BIOS-e820: 0000000075a4e000 - 0000000076870000 (usable) > BIOS-e820: 0000000076870000 - 0000000076880000 (ACPI NVS) > BIOS-e820: 0000000076880000 - 0000000078fb1000 (usable) > BIOS-e820: 0000000078fb1000 - 00000000791b1000 (ACPI NVS) > BIOS-e820: 00000000791b1000 - 000000007a88f000 (usable) > BIOS-e820: 000000007a88f000 - 000000007a9cf000 (reserved) > BIOS-e820: 000000007a9cf000 - 000000007aacf000 (ACPI NVS) > BIOS-e820: 000000007aacf000 - 000000007aaff000 (ACPI data) > BIOS-e820: 000000007aaff000 - 000000007ab00000 (usable) > BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) > BIOS-e820: 00000000fffa0000 - 00000000fffa7000 (reserved) > EFI v2.00 by INTEL > ACPI=0x7aafe000 ACPI 2.0=0x7aafe014 SMBIOS=0x7a99f718 > Kernel-defined memdesc doesn't match the one from EFI! > EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) > EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x0000000000071000) (0MB) > EFI: mem02: type=2, attr=0xf, range=[0x0000000000071000-0x0000000000073000) (0MB) > EFI: mem03: type=7, attr=0xf, range=[0x0000000000073000-0x0000000000075000) (0MB) > EFI: mem04: type=3, attr=0xf, range=[0x0000000000075000-0x0000000000090000) (0MB) > EFI: mem05: type=7, attr=0xf, range=[0x0000000000090000-0x0000000000097000) (0MB) > EFI: mem06: type=4, attr=0xf, range=[0x0000000000097000-0x0000000000098000) (0MB) > EFI: mem07: type=3, attr=0xf, range=[0x0000000000098000-0x00000000000a0000) (0MB) > EFI: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB) > EFI: mem09: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB) > EFI: mem10: type=7, attr=0xf, range=[0x0000000001000000-0x000000007493e000) (1849MB) > EFI: mem11: type=2, attr=0xf, range=[0x000000007493e000-0x0000000074940000) (0MB) > EFI: mem12: type=7, attr=0xf, range=[0x0000000074940000-0x0000000074943000) (0MB) > EFI: mem13: type=2, attr=0xf, range=[0x0000000074943000-0x00000000759cd000) (16MB) > EFI: mem14: type=1, attr=0xf, range=[0x00000000759cd000-0x0000000075a05000) (0MB) > EFI: mem15: type=3, attr=0xf, range=[0x0000000075a05000-0x0000000075a4c000) (0MB) > EFI: mem16: type=0, attr=0xf, range=[0x0000000075a4c000-0x0000000075a4e000) (0MB) > EFI: mem17: type=3, attr=0xf, range=[0x0000000075a4e000-0x0000000075f0b000) (4MB) > EFI: mem18: type=4, attr=0xf, range=[0x0000000075f0b000-0x0000000076870000) (9MB) > EFI: mem19: type=10, attr=0xf, range=[0x0000000076870000-0x0000000076880000) (0MB) > EFI: mem20: type=3, attr=0xf, range=[0x0000000076880000-0x000000007688f000) (0MB) > EFI: mem21: type=7, attr=0xf, range=[0x000000007688f000-0x0000000077a8f000) (18MB) > EFI: mem22: type=2, attr=0xf, range=[0x0000000077a8f000-0x0000000077d99000) (3MB) > EFI: mem23: type=4, attr=0xf, range=[0x0000000077d99000-0x0000000077db9000) (0MB) > EFI: mem24: type=7, attr=0xf, range=[0x0000000077db9000-0x0000000077dc9000) (0MB) > EFI: mem25: type=4, attr=0xf, range=[0x0000000077dc9000-0x0000000077fcf000) (2MB) > EFI: mem26: type=7, attr=0xf, range=[0x0000000077fcf000-0x0000000077fd0000) (0MB) > EFI: mem27: type=4, attr=0xf, range=[0x0000000077fd0000-0x0000000078462000) (4MB) > EFI: mem28: type=7, attr=0xf, range=[0x0000000078462000-0x0000000078463000) (0MB) > EFI: mem29: type=4, attr=0xf, range=[0x0000000078463000-0x0000000078fb1000) (11MB) > EFI: mem30: type=10, attr=0xf, range=[0x0000000078fb1000-0x00000000791b1000) (2MB) > EFI: mem31: type=4, attr=0xf, range=[0x00000000791b1000-0x0000000079269000) (0MB) > EFI: mem32: type=7, attr=0xf, range=[0x0000000079269000-0x000000007926c000) (0MB) > EFI: mem33: type=4, attr=0xf, range=[0x000000007926c000-0x000000007a88f000) (22MB) > EFI: mem34: type=5, attr=0x800000000000000f, range=[0x000000007a88f000-0x000000007a92a000) (0MB) > EFI: mem35: type=5, attr=0x800000000000000f, range=[0x000000007a92a000-0x000000007a98f000) (0MB) > EFI: mem36: type=6, attr=0x800000000000000f, range=[0x000000007a98f000-0x000000007a993000) (0MB) > EFI: mem37: type=0, attr=0xf, range=[0x000000007a993000-0x000000007a99b000) (0MB) > EFI: mem38: type=6, attr=0x800000000000000f, range=[0x000000007a99b000-0x000000007a9bf000) (0MB) > EFI: mem39: type=0, attr=0xf, range=[0x000000007a9bf000-0x000000007a9c4000) (0MB) > EFI: mem40: type=0, attr=0xf, range=[0x000000007a9c4000-0x000000007a9cf000) (0MB) > EFI: mem41: type=10, attr=0xf, range=[0x000000007a9cf000-0x000000007aa38000) (0MB) > EFI: mem42: type=10, attr=0xf, range=[0x000000007aa38000-0x000000007aacf000) (0MB) > EFI: mem43: type=9, attr=0xf, range=[0x000000007aacf000-0x000000007aad5000) (0MB) > EFI: mem44: type=9, attr=0xf, range=[0x000000007aad5000-0x000000007aaff000) (0MB) > EFI: mem45: type=4, attr=0xf, range=[0x000000007aaff000-0x000000007ab00000) (0MB) > EFI: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) > EFI: mem47: type=11, attr=0x8000000000000000, range=[0x00000000fffa0000-0x00000000fffa7000) (0MB) > DMI 2.4 present. > last_pfn = 0x7ab00 max_arch_pfn = 0x100000000 > MTRR default type: uncachable > MTRR fixed ranges enabled: > 00000-9FFFF write-back > A0000-BFFFF uncachable > C0000-FFFFF write-protect > MTRR variable ranges enabled: > 0 base 0FFE00000 mask FFFE00000 write-protect > 1 base 000000000 mask F80000000 write-back > 2 base 07F000000 mask FFF000000 uncachable > 3 base 076870000 mask FFFFF0000 uncachable > 4 disabled > 5 disabled > 6 disabled > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > original variable MTRRs > reg 0, base: 4094MB, range: 2MB, type WP > reg 1, base: 0GB, range: 2GB, type WB > reg 2, base: 2032MB, range: 16MB, type UC > reg 3, base: 1941952KB, range: 64KB, type UC > total RAM coverred: 2031M > gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 138944K > gran_size: 64K chunk_size: 128K num_reg: 7 lose cover RAM: 138688K > gran_size: 64K chunk_size: 256K num_reg: 7 lose cover RAM: 138688K > gran_size: 64K chunk_size: 512K num_reg: 7 lose cover RAM: 138688K > gran_size: 64K chunk_size: 1M num_reg: 7 lose cover RAM: 138176K > gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 137152K > gran_size: 64K chunk_size: 4M num_reg: 7 lose cover RAM: 135104K > gran_size: 64K chunk_size: 8M num_reg: 7 lose cover RAM: 128M > gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 128M > gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G > gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G > gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G > gran_size: 64K chunk_size: 256M num_reg: 7 lose cover RAM: 138944K > gran_size: 64K chunk_size: 512M num_reg: 7 lose cover RAM: 138944K > gran_size: 64K chunk_size: 1G num_reg: 7 lose cover RAM: 138944K > gran_size: 64K chunk_size: 2G num_reg: 7 lose cover RAM: 138944K > gran_size: 128K chunk_size: 128K num_reg: 7 lose cover RAM: 138944K > gran_size: 128K chunk_size: 256K num_reg: 7 lose cover RAM: 138688K > gran_size: 128K chunk_size: 512K num_reg: 7 lose cover RAM: 138688K > gran_size: 128K chunk_size: 1M num_reg: 7 lose cover RAM: 138176K > gran_size: 128K chunk_size: 2M num_reg: 7 lose cover RAM: 137152K > gran_size: 128K chunk_size: 4M num_reg: 7 lose cover RAM: 135104K > gran_size: 128K chunk_size: 8M num_reg: 7 lose cover RAM: 131136K > gran_size: 128K chunk_size: 16M num_reg: 7 lose cover RAM: 131136K > gran_size: 128K chunk_size: 32M num_reg: 7 lose cover RAM: 64K > gran_size: 128K chunk_size: 64M num_reg: 7 lose cover RAM: 64K > gran_size: 128K chunk_size: 128M num_reg: 7 lose cover RAM: 64K > gran_size: 128K chunk_size: 256M num_reg: 7 lose cover RAM: 138944K > gran_size: 128K chunk_size: 512M num_reg: 7 lose cover RAM: 138944K > gran_size: 128K chunk_size: 1G num_reg: 7 lose cover RAM: 138944K > gran_size: 128K chunk_size: 2G num_reg: 7 lose cover RAM: 138944K > gran_size: 256K chunk_size: 256K num_reg: 7 lose cover RAM: 138944K > gran_size: 256K chunk_size: 512K num_reg: 7 lose cover RAM: 138688K > gran_size: 256K chunk_size: 1M num_reg: 7 lose cover RAM: 138176K > gran_size: 256K chunk_size: 2M num_reg: 7 lose cover RAM: 137152K > gran_size: 256K chunk_size: 4M num_reg: 7 lose cover RAM: 135104K > gran_size: 256K chunk_size: 8M num_reg: 7 lose cover RAM: 131264K > gran_size: 256K chunk_size: 16M num_reg: 7 lose cover RAM: 131264K > gran_size: 256K chunk_size: 32M num_reg: 7 lose cover RAM: 192K > gran_size: 256K chunk_size: 64M num_reg: 7 lose cover RAM: 192K > gran_size: 256K chunk_size: 128M num_reg: 7 lose cover RAM: 192K > gran_size: 256K chunk_size: 256M num_reg: 7 lose cover RAM: 138944K > gran_size: 256K chunk_size: 512M num_reg: 7 lose cover RAM: 138944K > gran_size: 256K chunk_size: 1G num_reg: 7 lose cover RAM: 138944K > gran_size: 256K chunk_size: 2G num_reg: 7 lose cover RAM: 138944K > gran_size: 512K chunk_size: 512K num_reg: 7 lose cover RAM: 138688K > gran_size: 512K chunk_size: 1M num_reg: 7 lose cover RAM: 138688K > gran_size: 512K chunk_size: 2M num_reg: 7 lose cover RAM: 138688K > gran_size: 512K chunk_size: 4M num_reg: 7 lose cover RAM: 138688K > gran_size: 512K chunk_size: 8M num_reg: 7 lose cover RAM: 138688K > gran_size: 512K chunk_size: 16M num_reg: 7 lose cover RAM: 131520K > gran_size: 512K chunk_size: 32M num_reg: 7 lose cover RAM: 448K > gran_size: 512K chunk_size: 64M num_reg: 7 lose cover RAM: 448K > gran_size: 512K chunk_size: 128M num_reg: 7 lose cover RAM: 448K > gran_size: 512K chunk_size: 256M num_reg: 7 lose cover RAM: 138688K > gran_size: 512K chunk_size: 512M num_reg: 7 lose cover RAM: 138688K > gran_size: 512K chunk_size: 1G num_reg: 7 lose cover RAM: 138688K > gran_size: 512K chunk_size: 2G num_reg: 7 lose cover RAM: 138688K > gran_size: 1M chunk_size: 1M num_reg: 7 lose cover RAM: 138688K > gran_size: 1M chunk_size: 2M num_reg: 7 lose cover RAM: 138688K > gran_size: 1M chunk_size: 4M num_reg: 7 lose cover RAM: 138688K > gran_size: 1M chunk_size: 8M num_reg: 7 lose cover RAM: 138688K > gran_size: 1M chunk_size: 16M num_reg: 7 lose cover RAM: 131520K > gran_size: 1M chunk_size: 32M num_reg: 7 lose cover RAM: 448K > gran_size: 1M chunk_size: 64M num_reg: 7 lose cover RAM: 448K > gran_size: 1M chunk_size: 128M num_reg: 7 lose cover RAM: 448K > gran_size: 1M chunk_size: 256M num_reg: 7 lose cover RAM: 138688K > gran_size: 1M chunk_size: 512M num_reg: 7 lose cover RAM: 138688K > gran_size: 1M chunk_size: 1G num_reg: 7 lose cover RAM: 138688K > gran_size: 1M chunk_size: 2G num_reg: 7 lose cover RAM: 138688K > gran_size: 2M chunk_size: 2M num_reg: 7 lose cover RAM: 138688K > gran_size: 2M chunk_size: 4M num_reg: 7 lose cover RAM: 138688K > gran_size: 2M chunk_size: 8M num_reg: 7 lose cover RAM: 138688K > gran_size: 2M chunk_size: 16M num_reg: 7 lose cover RAM: 131520K > gran_size: 2M chunk_size: 32M num_reg: 7 lose cover RAM: 448K > gran_size: 2M chunk_size: 64M num_reg: 7 lose cover RAM: 448K > gran_size: 2M chunk_size: 128M num_reg: 7 lose cover RAM: 448K > gran_size: 2M chunk_size: 256M num_reg: 7 lose cover RAM: 138688K > gran_size: 2M chunk_size: 512M num_reg: 7 lose cover RAM: 138688K > gran_size: 2M chunk_size: 1G num_reg: 7 lose cover RAM: 138688K > gran_size: 2M chunk_size: 2G num_reg: 7 lose cover RAM: 138688K > gran_size: 4M chunk_size: 4M num_reg: 7 lose cover RAM: 138688K > gran_size: 4M chunk_size: 8M num_reg: 7 lose cover RAM: 138688K > gran_size: 4M chunk_size: 16M num_reg: 7 lose cover RAM: 131520K > gran_size: 4M chunk_size: 32M num_reg: 7 lose cover RAM: 448K > gran_size: 4M chunk_size: 64M num_reg: 7 lose cover RAM: 448K > gran_size: 4M chunk_size: 128M num_reg: 7 lose cover RAM: 448K > gran_size: 4M chunk_size: 256M num_reg: 7 lose cover RAM: 138688K > gran_size: 4M chunk_size: 512M num_reg: 7 lose cover RAM: 138688K > gran_size: 4M chunk_size: 1G num_reg: 7 lose cover RAM: 138688K > gran_size: 4M chunk_size: 2G num_reg: 7 lose cover RAM: 138688K > gran_size: 8M chunk_size: 8M num_reg: 7 lose cover RAM: 138688K > gran_size: 8M chunk_size: 16M num_reg: 7 lose cover RAM: 131520K > gran_size: 8M chunk_size: 32M num_reg: 7 lose cover RAM: 448K > gran_size: 8M chunk_size: 64M num_reg: 7 lose cover RAM: 448K > gran_size: 8M chunk_size: 128M num_reg: 7 lose cover RAM: 448K > gran_size: 8M chunk_size: 256M num_reg: 7 lose cover RAM: 138688K > gran_size: 8M chunk_size: 512M num_reg: 7 lose cover RAM: 138688K > gran_size: 8M chunk_size: 1G num_reg: 7 lose cover RAM: 138688K > gran_size: 8M chunk_size: 2G num_reg: 7 lose cover RAM: 138688K > gran_size: 16M chunk_size: 16M num_reg: 7 lose cover RAM: 145856K > gran_size: 16M chunk_size: 32M num_reg: 7 lose cover RAM: 145856K > *BAD*gran_size: 16M chunk_size: 64M num_reg: 7 lose cover RAM: -7744K > *BAD*gran_size: 16M chunk_size: 128M num_reg: 7 lose cover RAM: -7744K > gran_size: 16M chunk_size: 256M num_reg: 7 lose cover RAM: 145856K > gran_size: 16M chunk_size: 512M num_reg: 7 lose cover RAM: 145856K > gran_size: 16M chunk_size: 1G num_reg: 7 lose cover RAM: 145856K > gran_size: 16M chunk_size: 2G num_reg: 7 lose cover RAM: 145856K > gran_size: 32M chunk_size: 32M num_reg: 7 lose cover RAM: 145856K > *BAD*gran_size: 32M chunk_size: 64M num_reg: 7 lose cover RAM: -7744K > *BAD*gran_size: 32M chunk_size: 128M num_reg: 7 lose cover RAM: -7744K > gran_size: 32M chunk_size: 256M num_reg: 7 lose cover RAM: 145856K > gran_size: 32M chunk_size: 512M num_reg: 7 lose cover RAM: 145856K > gran_size: 32M chunk_size: 1G num_reg: 7 lose cover RAM: 145856K > gran_size: 32M chunk_size: 2G num_reg: 7 lose cover RAM: 145856K > gran_size: 64M chunk_size: 64M num_reg: 7 lose cover RAM: 176576K > gran_size: 64M chunk_size: 128M num_reg: 7 lose cover RAM: 156096K > gran_size: 64M chunk_size: 256M num_reg: 7 lose cover RAM: 176576K > gran_size: 64M chunk_size: 512M num_reg: 7 lose cover RAM: 176576K > gran_size: 64M chunk_size: 1G num_reg: 7 lose cover RAM: 176576K > gran_size: 64M chunk_size: 2G num_reg: 7 lose cover RAM: 176576K > gran_size: 128M chunk_size: 128M num_reg: 3 lose cover RAM: 245696K > gran_size: 128M chunk_size: 256M num_reg: 3 lose cover RAM: 245696K > gran_size: 128M chunk_size: 512M num_reg: 3 lose cover RAM: 245696K > gran_size: 128M chunk_size: 1G num_reg: 3 lose cover RAM: 245696K > gran_size: 128M chunk_size: 2G num_reg: 3 lose cover RAM: 245696K > gran_size: 256M chunk_size: 256M num_reg: 3 lose cover RAM: 245696K > gran_size: 256M chunk_size: 512M num_reg: 3 lose cover RAM: 245696K > gran_size: 256M chunk_size: 1G num_reg: 3 lose cover RAM: 245696K > gran_size: 256M chunk_size: 2G num_reg: 3 lose cover RAM: 245696K > gran_size: 512M chunk_size: 512M num_reg: 2 lose cover RAM: 507840K > gran_size: 512M chunk_size: 1G num_reg: 2 lose cover RAM: 507840K > gran_size: 512M chunk_size: 2G num_reg: 2 lose cover RAM: 507840K > gran_size: 1G chunk_size: 1G num_reg: 1 lose cover RAM: 1032128K > gran_size: 1G chunk_size: 2G num_reg: 1 lose cover RAM: 1032128K > gran_size: 2G chunk_size: 2G num_reg: 0 lose cover RAM: 2080704K > mtrr_cleanup: can not find optimal value > please specify mtrr_gran_size/mtrr_chunk_size > init_memory_mapping: 0000000000000000-000000007ab00000 > 0000000000 - 007aa00000 page 2M > 007aa00000 - 007ab00000 page 4k > kernel direct mapping tables up to 7ab00000 @ 8000-c000 > RAMDISK: 77a8f000 - 77d98445 > ACPI: RSDP 000000007aafe014 00024 (v02 HPQOEM) > ACPI: XSDT 000000007aafe120 00084 (v01 HPQOEM SLIC-MPC 0000000F 01000013) > ACPI: FACP 000000007aafc000 000F4 (v03 HPQOEM 30E1 0000000F HP 00000001) > ACPI: DSDT 000000007aade000 18BB2 (v01 HPQOEM 30E1 00000001 INTL 20060912) > ACPI: FACS 000000007aa9d000 00040 > ACPI: HPET 000000007aafb000 00038 (v01 HPQOEM 30E1 00000001 HP 00000001) > ACPI: APIC 000000007aafa000 00084 (v01 HPQOEM 30E1 00000001 HP 00000001) > ACPI: MCFG 000000007aaf9000 0003C (v01 HPQOEM 30E1 00000001 HP 00000001) > ACPI: TCPA 000000007aaf7000 00032 (v02 HPQOEM 30E1 00000000 HP 00000001) > ACPI: SSDT 000000007aadb000 002DD (v01 HPQOEM SataAhci 00001000 INTL 20060912) > ACPI: SLIC 000000007aad9000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) > ACPI: DMAR 000000007aad8000 00120 (v01 00000001 00000000) > ACPI: ASF! 000000007aaf8000 00095 (v32 HPQOEM 30E1 00000001 HP 00000001) > ACPI: SSDT 000000007aad7000 0066C (v01 PmRef CpuPm 00003000 INTL 20060912) > ACPI: SSDT 000000007aad6000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) > ACPI: SSDT 000000007aad5000 00225 (v01 PmRef ApTst 00003000 INTL 20060912) > ACPI: Local APIC address 0xfee00000 > No NUMA configuration found > Faking a node at 0000000000000000-000000007ab00000 > Bootmem setup node 0 0000000000000000-000000007ab00000 > NODE_DATA [000000000000a000 - 000000000001efff] > bootmap [000000000001f000 - 000000000002e55f] pages 10 > (8 early reservations) ==> bootmem [0000000000 - 007ab00000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > #2 [0000200000 - 0000bd11a0] TEXT DATA BSS ==> [0000200000 - 0000bd11a0] > #3 [0077a8f000 - 0077d98445] RAMDISK ==> [0077a8f000 - 0077d98445] > #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] > #5 [007493e000 - 007493e900] EFI memmap ==> [007493e000 - 007493e900] > #6 [0000bd2000 - 0000bd21bc] BRK ==> [0000bd2000 - 0000bd21bc] > #7 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] > [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x00100000 > Movable zone start PFN for each node > early_node_map[6] active PFN ranges > 0: 0x00000000 -> 0x000000a0 > 0: 0x00000100 -> 0x00075a4c > 0: 0x00075a4e -> 0x00076870 > 0: 0x00076880 -> 0x00078fb1 > 0: 0x000791b1 -> 0x0007a88f > 0: 0x0007aaff -> 0x0007ab00 > On node 0 totalpages: 501278 > DMA zone: 56 pages used for memmap > DMA zone: 2614 pages reserved > DMA zone: 1330 pages, LIFO batch:0 > DMA32 zone: 6815 pages used for memmap > DMA32 zone: 490463 pages, LIFO batch:31 > ACPI: PM-Timer IO Port: 0x408 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > SMP: Allowing 4 CPUs, 2 hotplug CPUs > nr_irqs_gsi: 24 > PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 > PM: Registered nosave memory: 0000000075a4c000 - 0000000075a4e000 > PM: Registered nosave memory: 0000000076870000 - 0000000076880000 > PM: Registered nosave memory: 0000000078fb1000 - 00000000791b1000 > PM: Registered nosave memory: 000000007a88f000 - 000000007a9cf000 > PM: Registered nosave memory: 000000007a9cf000 - 000000007aacf000 > PM: Registered nosave memory: 000000007aacf000 - 000000007aaff000 > Allocating PCI resources starting at 80000000 (gap: 7ab00000:8421c000) > NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 > PERCPU: Embedded 27 pages at ffff880001010000, static data 79584 bytes > Built 1 zonelists in Node order, mobility grouping on. Total pages: 491793 > Policy zone: DMA32 > Kernel command line: ro root=UUID=fd334e23-080a-449d-8993-07758e5cd581 rhgb quiet > Initializing CPU#0 > NR_IRQS:4352 nr_irqs:440 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Extended CMOS year: 2000 > Fast TSC calibration using PIT > Detected 1197.010 MHz processor. > Console: colour VGA+ 128x40 > console [tty0] enabled > allocated 20971520 bytes of page_cgroup > please try cgroup_disable=memory option if you don't want > Checking aperture... > No AGP bridge found > Calgary: detecting Calgary via BIOS EBDA area > Calgary: Unable to locate Rio Grande table in EBDA - bailing! > Memory: 1942040k/2010112k available (4736k kernel code, 5000k absent, 63072k reserved, 2498k data, 1348k init) > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > hpet clockevent registered > HPET: 4 timers in total, 0 timers will be used for per-cpu timer > Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.02 BogoMIPS (lpj=1197010) > init_memory_mapping: 00000000fed1c000-00000000fed20000 > 00fed1c000 - 00fed20000 page 4k > init_memory_mapping: 00000000fffa0000-00000000fffa7000 > 00fffa0000 - 00fffa7000 page 4k > Security Framework initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > Mount-cache hash table entries: 256 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > Initializing cgroup subsys memory > Initializing cgroup subsys devices > Initializing cgroup subsys freezer > Initializing cgroup subsys net_cls > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 3072K > CPU 0/0x0 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU0: Thermal monitoring handled by SMI > using mwait in idle threads. > ACPI: Core revision 20090320 > ftrace: converting mcount calls to 0f 1f 44 00 00 > ftrace: allocating 19374 entries in 76 pages > Setting APIC routing to flat > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: Intel(R) Core(TM)2 Duo CPU U9300 @ 1.20GHz stepping 06 > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 2393.88 BogoMIPS (lpj=1196943) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 3072K > CPU 1/0x1 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU1: Thermal monitoring enabled (TM2) > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel(R) Core(TM)2 Duo CPU U9300 @ 1.20GHz stepping 06 > checking TSC synchronization [CPU#0 -> CPU#1]: passed. > Brought up 2 CPUs > Total of 2 processors activated (4787.90 BogoMIPS). > sizeof(vma)=176 bytes > sizeof(page)=56 bytes > sizeof(inode)=576 bytes > sizeof(dentry)=192 bytes > sizeof(ext3inode)=784 bytes > sizeof(buffer_head)=104 bytes > sizeof(skbuff)=232 bytes > sizeof(task_struct)=5960 bytes > CPU0 attaching sched-domain: > domain 0: span 0-1 level MC > groups: 0 1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level MC > groups: 1 0 > net_namespace: 1952 bytes > Booting paravirtualized kernel on bare hardware > regulator: core version 0.5 > Time: 13:56:42 Date: 10/19/09 > NET: Registered protocol family 16 > ACPI FADT declares the system doesn't support PCIe ASPM, so disable it > ACPI: bus type pci registered > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > PCI: Not using MMCONFIG. > PCI: Using configuration type 1 for base access > bio: create slab <bio-0> at 0 > ACPI: EC: Look up EC in DSDT > ACPI: BIOS _OSI(Linux) query ignored > ACPI: EC: non-query interrupt received, switching to interrupt mode > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > PCI: MCFG area at e0000000 reserved in ACPI motherboard resources > PCI: Using MMCONFIG at e0000000 - efffffff > ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 > ACPI: EC: driver started in interrupt mode > ACPI: Power Resource [APPR] (off) > ACPI: No dock devices found. > ACPI: PCI Root Bridge [PCI0] (0000:00) > DMAR: Forcing write-buffer flush capability > pci 0000:00:02.0: reg 10 64bit mmio: [0x94000000-0x943fffff] > pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff] > pci 0000:00:02.0: reg 20 io port: [0x4138-0x413f] > pci 0000:00:02.1: reg 10 64bit mmio: [0x94400000-0x944fffff] > pci 0000:00:03.0: reg 10 64bit mmio: [0x94827000-0x9482700f] > pci 0000:00:03.0: PME# supported from D0 D3hot D3cold > pci 0000:00:03.0: PME# disabled > pci 0000:00:03.2: reg 10 io port: [0x4130-0x4137] > pci 0000:00:03.2: reg 14 io port: [0x414c-0x414f] > pci 0000:00:03.2: reg 18 io port: [0x4128-0x412f] > pci 0000:00:03.2: reg 1c io port: [0x4148-0x414b] > pci 0000:00:03.2: reg 20 io port: [0x4100-0x410f] > pci 0000:00:03.3: reg 10 io port: [0x4120-0x4127] > pci 0000:00:03.3: reg 14 32bit mmio: [0x94825000-0x94825fff] > pci 0000:00:19.0: reg 10 32bit mmio: [0x94800000-0x9481ffff] > pci 0000:00:19.0: reg 14 32bit mmio: [0x94824000-0x94824fff] > pci 0000:00:19.0: reg 18 io port: [0x40e0-0x40ff] > pci 0000:00:19.0: PME# supported from D0 D3hot D3cold > pci 0000:00:19.0: PME# disabled > pci 0000:00:1a.0: reg 20 io port: [0x40c0-0x40df] > pci 0000:00:1a.1: reg 20 io port: [0x40a0-0x40bf] > pci 0000:00:1a.2: reg 20 io port: [0x4080-0x409f] > pci 0000:00:1a.7: reg 10 32bit mmio: [0x94826c00-0x94826fff] > pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1a.7: PME# disabled > pci 0000:00:1b.0: reg 10 64bit mmio: [0x94820000-0x94823fff] > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1b.0: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.1: PME# disabled > pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.2: PME# disabled > pci 0000:00:1d.0: reg 20 io port: [0x4060-0x407f] > pci 0000:00:1d.1: reg 20 io port: [0x4040-0x405f] > pci 0000:00:1d.2: reg 20 io port: [0x4020-0x403f] > pci 0000:00:1d.7: reg 10 32bit mmio: [0x94826800-0x94826bff] > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.7: PME# disabled > pci 0000:00:1f.2: reg 10 io port: [0x4118-0x411f] > pci 0000:00:1f.2: reg 14 io port: [0x4144-0x4147] > pci 0000:00:1f.2: reg 18 io port: [0x4110-0x4117] > pci 0000:00:1f.2: reg 1c io port: [0x4140-0x4143] > pci 0000:00:1f.2: reg 20 io port: [0x4000-0x401f] > pci 0000:00:1f.2: reg 24 32bit mmio: [0x94826000-0x948267ff] > pci 0000:00:1f.2: PME# supported from D3hot > pci 0000:00:1f.2: PME# disabled > pci 0000:00:1c.0: bridge 32bit mmio: [0x94700000-0x947fffff] > pci 0000:02:00.0: reg 10 64bit mmio: [0x94600000-0x94601fff] > pci 0000:02:00.0: PME# supported from D0 D3hot D3cold > pci 0000:02:00.0: PME# disabled > pci 0000:00:1c.1: bridge 32bit mmio: [0x94600000-0x946fffff] > pci 0000:00:1c.2: bridge io port: [0x2000-0x3fff] > pci 0000:00:1c.2: bridge 32bit mmio: [0x90000000-0x93ffffff] > pci 0000:44:06.0: reg 10 32bit mmio: [0x94500000-0x945007ff] > pci 0000:44:06.0: supports D1 D2 > pci 0000:44:06.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:44:06.0: PME# disabled > pci 0000:44:06.1: reg 10 32bit mmio: [0x94500900-0x945009ff] > pci 0000:44:06.1: supports D1 D2 > pci 0000:44:06.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:44:06.1: PME# disabled > pci 0000:44:06.2: reg 10 32bit mmio: [0x94500800-0x945008ff] > pci 0000:44:06.2: supports D1 D2 > pci 0000:44:06.2: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:44:06.2: PME# disabled > pci 0000:00:1e.0: transparent bridge > pci 0000:00:1e.0: bridge 32bit mmio: [0x94500000-0x945fffff] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. > SCSI subsystem initialized > libata version 3.00 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > DMAR:Host address width 36 > DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb03000 > DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb01000 > DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb00000 > DMAR:DRHD (flags: 0x00000001)base: 0x00000000feb02000 > DMAR:RMRR base: 0x0000000076870000 end: 0x000000007687ffff > DMAR:RMRR base: 0x000000007ac00000 end: 0x000000007effffff > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 > hpet0: 4 comparators, 64-bit 14.318180 MHz counter > pnp: PnP ACPI init > ACPI: bus type pnp registered > alloc irq_desc for 23 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > pnp: PnP ACPI: found 12 devices > ACPI: ACPI bus type pnp unregistered > system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved > system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved > system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved > system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved > system 00:01: iomem range 0xe0000000-0xefffffff has been reserved > system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved > system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved > system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved > system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved > system 00:07: ioport range 0x200-0x27f has been reserved > system 00:07: ioport range 0x1000-0x1003 has been reserved > system 00:07: ioport range 0x1010-0x101f has been reserved > system 00:07: ioport range 0xffff-0xffff has been reserved > system 00:07: ioport range 0x400-0x47f has been reserved > system 00:07: ioport range 0x500-0x57f has been reserved > system 00:07: ioport range 0xef80-0xef9f has been reserved > pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:1c.0: IO window: disabled > pci 0000:00:1c.0: MEM window: 0x94700000-0x947fffff > pci 0000:00:1c.0: PREFETCH window: disabled > pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 > pci 0000:00:1c.1: IO window: disabled > pci 0000:00:1c.1: MEM window: 0x94600000-0x946fffff > pci 0000:00:1c.1: PREFETCH window: disabled > pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 > pci 0000:00:1c.2: IO window: 0x2000-0x3fff > pci 0000:00:1c.2: MEM window: 0x90000000-0x93ffffff > pci 0000:00:1c.2: PREFETCH window: disabled > pci 0000:00:1e.0: PCI bridge, secondary bus 0000:44 > pci 0000:00:1e.0: IO window: disabled > pci 0000:00:1e.0: MEM window: 0x94500000-0x945fffff > pci 0000:00:1e.0: PREFETCH window: disabled > pci 0000:00:1c.0: enabling device (0000 -> 0002) > alloc irq_desc for 16 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.0: setting latency timer to 64 > alloc irq_desc for 17 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: enabling device (0000 -> 0003) > alloc irq_desc for 18 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1e.0: setting latency timer to 64 > pci_bus 0000:00: resource 0 io: [0x00-0xffff] > pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] > pci_bus 0000:01: resource 1 mem: [0x94700000-0x947fffff] > pci_bus 0000:02: resource 1 mem: [0x94600000-0x946fffff] > pci_bus 0000:03: resource 0 io: [0x2000-0x3fff] > pci_bus 0000:03: resource 1 mem: [0x90000000-0x93ffffff] > pci_bus 0000:44: resource 1 mem: [0x94500000-0x945fffff] > pci_bus 0000:44: resource 3 io: [0x00-0xffff] > pci_bus 0000:44: resource 4 mem: [0x000000-0xffffffffffffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > Trying to unpack rootfs image as initramfs... > Switched to high resolution mode on CPU 1 > Switched to high resolution mode on CPU 0 > Freeing initrd memory: 3109k freed > audit: initializing netlink socket (disabled) > type=2000 audit(1255960602.522:1): initialized > HugeTLB registered 2 MB page size, pre-allocated 0 pages > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > msgmni has been set to 3799 > SELinux: Registering netfilter hooks > alg: No test for stdrng (krng) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci 0000:00:02.0: Boot video device > alloc irq_desc for 24 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X > pcieport-driver 0000:00:1c.0: setting latency timer to 64 > alloc irq_desc for 25 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X > pcieport-driver 0000:00:1c.1: setting latency timer to 64 > alloc irq_desc for 26 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X > pcieport-driver 0000:00:1c.2: setting latency timer to 64 > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > Firmware did not grant requested _OSC control > Firmware did not grant requested _OSC control > Firmware did not grant requested _OSC control > Firmware did not grant requested _OSC control > Firmware did not grant requested _OSC control > Firmware did not grant requested _OSC control > pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > acpiphp_glue: can't get bus number, assuming 0 > acpiphp: Slot [1] registered > efifb: invalid framebuffer address > ACPI: AC Adapter [AC] (on-line) > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > ACPI: Power Button [PWRF] > input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 > ACPI: Sleep Button [SLPB] > input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 > ACPI: Lid Switch [LID] > ACPI: SSDT 000000007a9c7c98 00233 (v01 PmRef Cpu0Ist 00003000 INTL 20060912) > ACPI: SSDT 000000007a9c5618 0057B (v01 PmRef Cpu0Cst 00003001 INTL 20060912) > ACPI Warning (processor_throttling-0844): Invalid throttling state, reset [20090320] > Monitor-Mwait will be used to enter C-1 state > Monitor-Mwait will be used to enter C-2 state > Marking TSC unstable due to TSC halts in idle > ACPI: CPU0 (power states: C1[C1] C2[C2]) > processor ACPI_CPU:00: registered as cooling_device0 > ACPI: Processor [CPU0] (supports 8 throttling states) > ACPI: SSDT 000000007a9c6e18 001D7 (v01 PmRef ApIst 00003000 INTL 20060912) > ACPI: SSDT 000000007a9c7f18 0008D (v01 PmRef ApCst 00003000 INTL 20060912) > ACPI Warning (processor_throttling-0844): Invalid throttling state, reset [20090320] > ACPI: CPU1 (power states: C1[C1] C2[C2]) > processor ACPI_CPU:01: registered as cooling_device1 > ACPI: Processor [CPU1] (supports 8 throttling states) > thermal LNXTHERM:01: registered as thermal_zone0 > ACPI: Thermal Zone [DTSZ] (39 C) > thermal LNXTHERM:02: registered as thermal_zone1 > ACPI: Thermal Zone [BATZ] (27 C) > thermal LNXTHERM:03: registered as thermal_zone2 > ACPI: Thermal Zone [CPUZ] (39 C) > thermal LNXTHERM:04: registered as thermal_zone3 > ACPI: Thermal Zone [LOCZ] (37 C) > thermal LNXTHERM:05: registered as thermal_zone4 > ACPI: Thermal Zone [SKNZ] (36 C) > Non-volatile memory driver v1.3 > Linux agpgart interface v0.103 > agpgart-intel 0000:00:00.0: Intel Mobile Intel� GM45 Express Chipset > agpgart-intel 0000:00:00.0: detected 65532K stolen memory > agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > serial 0000:00:03.3: enabling device (0000 -> 0003) > serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > 0000:00:03.3: ttyS0 at I/O 0x4120 (irq = 17) is a 16550A > brd: module loaded > loop: module loaded > input: Macintosh mouse button emulation as /devices/virtual/input/input3 > Driver 'sd' needs updating - please use bus_type methods > Driver 'sr' needs updating - please use bus_type methods > ahci 0000:00:1f.2: version 3.0 > alloc irq_desc for 21 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21 > alloc irq_desc for 27 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > ahci 0000:00:1f.2: irq 27 for MSI/MSI-X > ahci: SSS flag set, parallel bus scan disabled > ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode > ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems > ahci 0000:00:1f.2: setting latency timer to 64 > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > ata1: SATA max UDMA/133 abar m2048(a)0x94826000 port 0x94826100 irq 27 > ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 27 > ata3: DUMMY > ata4: DUMMY > Fixed MDIO Bus: probed > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd 0000:00:1a.7: enabling device (0000 -> 0002) > alloc irq_desc for 19 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > ehci_hcd 0000:00:1a.7: EHCI Host Controller > ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1a.7: debug port 1 > ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported > ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94826c00 > ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 ehci_hcd > usb usb1: SerialNumber: 0000:00:1a.7 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 6 ports detected > ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002) > alloc irq_desc for 20 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:1d.7: debug port 1 > ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > ehci_hcd 0000:00:1d.7: irq 20, io mem 0x94826800 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: EHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 ehci_hcd > usb usb2: SerialNumber: 0000:00:1d.7 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 6 ports detected > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > uhci_hcd: USB Universal Host Controller Interface driver > uhci_hcd 0000:00:1a.0: enabling device (0000 -> 0001) > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: UHCI Host Controller > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040c0 > usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: UHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd > usb usb3: SerialNumber: 0000:00:1a.0 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > uhci_hcd 0000:00:1a.1: enabling device (0000 -> 0001) > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > uhci_hcd 0000:00:1a.1: UHCI Host Controller > uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1a.1: irq 17, io base 0x000040a0 > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: UHCI Host Controller > usb usb4: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd > usb usb4: SerialNumber: 0000:00:1a.1 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > uhci_hcd 0000:00:1a.2: enabling device (0000 -> 0001) > uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1a.2: setting latency timer to 64 > uhci_hcd 0000:00:1a.2: UHCI Host Controller > uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1a.2: irq 18, io base 0x00004080 > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: UHCI Host Controller > usb usb5: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd > usb usb5: SerialNumber: 0000:00:1a.2 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.0: enabling device (0000 -> 0001) > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 > uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060 > usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb6: Product: UHCI Host Controller > usb usb6: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd > usb usb6: SerialNumber: 0000:00:1d.0 > usb usb6: configuration #1 chosen from 1 choice > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.1: enabling device (0000 -> 0001) > alloc irq_desc for 22 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 > uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004040 > usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb7: Product: UHCI Host Controller > usb usb7: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd > usb usb7: SerialNumber: 0000:00:1d.1 > usb usb7: configuration #1 chosen from 1 choice > hub 7-0:1.0: USB hub found > hub 7-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.2: enabling device (0000 -> 0001) > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004020 > usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb8: Product: UHCI Host Controller > usb usb8: Manufacturer: Linux 2.6.30.8-64.fc11.x86_64 uhci_hcd > usb usb8: SerialNumber: 0000:00:1d.2 > usb usb8: configuration #1 chosen from 1 choice > hub 8-0:1.0: USB hub found > hub 8-0:1.0: 2 ports detected > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > i8042.c: Detected active multiplexing controller, rev 1.1. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX0 port at 0x60,0x64 irq 12 > serio: i8042 AUX1 port at 0x60,0x64 irq 12 > serio: i8042 AUX2 port at 0x60,0x64 irq 12 > serio: i8042 AUX3 port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > rtc_cmos 00:08: RTC can wake from S4 > rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel(a)redhat.com > cpuidle: using governor ladder > cpuidle: using governor menu > EFI Variables Facility v0.08 2004-May-17 > input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 > ACPI: Battery Slot [BAT0] (battery present) > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > usbhid: v2.6:USB HID core driver > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use > nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or > sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP cubic registered > Initializing XFRM netlink socket > NET: Registered protocol family 17 > PM: Resume from disk failed. > registered taskstats version 1 > Magic number: 13:720:938 > Initalizing network drop monitor service > usb 1-2: new high speed USB device using ehci_hcd and address 3 > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out > ata1.00: ATA-8: SAMSUNG HS08XJF, 3AA10050, max UDMA/100 > ata1.00: 156301488 sectors, multi 16: LBA48 > ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out > ata1.00: configured for UDMA/100 > scsi 0:0:0:0: Direct-Access ATA SAMSUNG HS08XJF 3AA1 PQ: 0 ANSI: 5 > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 sda3 > usb 1-2: New USB device found, idVendor=03f0, idProduct=201d > usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 > usb 1-2: Product: HP un2400 Mobile Broadband Module > usb 1-2: Manufacturer: HP un2400 Mobile Broadband Module > usb 1-2: configuration #1 chosen from 1 choice > sd 0:0:0:0: [sda] Attached SCSI disk > input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5 > usb 1-5: new high speed USB device using ehci_hcd and address 5 > Clocksource tsc unstable (delta = -213797952 ns) > usb 1-5: New USB device found, idVendor=04f2, idProduct=b082 > usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 > usb 1-5: Product: CKA7227 > usb 1-5: Manufacturer: Chicony Electronics Co., Ltd. > usb 1-5: SerialNumber: SN0001 > usb 1-5: configuration #1 chosen from 1 choice > usb 3-1: new full speed USB device using uhci_hcd and address 2 > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out > ata2.00: ATAPI: Optiarc DVD RW AD-7910S, 1.81, max UDMA/100 > ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out > ata2.00: configured for UDMA/100 > usb 3-1: New USB device found, idVendor=03f0, idProduct=171d > usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 3-1: Product: HP Integrated Module > usb 3-1: Manufacturer: Broadcom Corp > usb 3-1: configuration #1 chosen from 1 choice > scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7910S 1.81 PQ: 0 ANSI: 5 > sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 1:0:0:0: Attached scsi CD-ROM sr0 > sr 1:0:0:0: Attached scsi generic sg1 type 5 > Freeing unused kernel memory: 1348k freed > Write protecting the kernel read-only data: 6728k > Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000 > input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 > usb 4-1: new full speed USB device using uhci_hcd and address 2 > usb 4-1: New USB device found, idVendor=08ff, idProduct=2810 > usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 > usb 4-1: Product: Fingerprint Sensor > usb 4-1: configuration #1 chosen from 1 choice > [drm] Initialized drm 1.1.0 20060810 > i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > i915 0000:00:02.0: setting latency timer to 64 > alloc irq_desc for 28 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > i915 0000:00:02.0: irq 28 for MSI/MSI-X > [drm] TV-13: set mode NTSC 480i 0 > allocated 1280x800 fb: 0x04020000, bo ffff8800778e3a80 > Console: switching to colour frame buffer device 160x50 > [drm] LVDS-8: set mode 1280x800 15 > fb0: inteldrmfb frame buffer device > registered panic notifier > acpi device:07: registered as cooling_device2 > input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input7 > ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) > [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > type=1404 audit(1255960606.220:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 > SELinux: 8192 avtab hash slots, 130119 rules. > SELinux: 8192 avtab hash slots, 130119 rules. > SELinux: 8 users, 12 roles, 2769 types, 129 bools, 1 sens, 1024 cats > SELinux: 74 classes, 130119 rules > SELinux: Completing initialization. > SELinux: Setting up existing superblocks. > SELinux: initialized (dev sda1, type ext3), uses xattr > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts > SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts > SELinux: initialized (dev devpts, type devpts), uses transition SIDs > SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts > SELinux: initialized (dev pipefs, type pipefs), uses task SIDs > SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts > SELinux: initialized (dev sockfs, type sockfs), uses task SIDs > SELinux: initialized (dev proc, type proc), uses genfs_contexts > SELinux: initialized (dev bdev, type bdev), uses genfs_contexts > SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > type=1403 audit(1255960606.737:3): policy loaded auid=4294967295 ses=4294967295 > udev: starting version 141 > usbcore: registered new interface driver usbserial > USB Serial support registered for generic > usbcore: registered new interface driver usbserial_generic > usbserial: USB Serial Driver core > USB Serial support registered for Qualcomm USB modem > qcserial 1-2:1.0: Qualcomm USB modem converter detected > usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 > usbcore: registered new interface driver qcserial > Linux video capture interface: v2.00 > uvcvideo: Found UVC 1.00 device CKA7227 (04f2:b082) > input: CKA7227 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input8 > usbcore: registered new interface driver uvcvideo > USB Video Class driver (v0.1.0) > cfg80211: Calling CRDA to update world regulatory domain > Bluetooth: Core ver 2.15 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > pata_acpi 0000:00:03.2: enabling device (0000 -> 0001) > pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pata_acpi 0000:00:03.2: setting latency timer to 64 > pata_acpi 0000:00:03.2: PCI INT C disabled > ACPI: WMI: Mapper loaded > iTCO_vendor_support: vendor-support=0 > lib80211: common routines for IEEE802.11 drivers > lib80211_crypt: registered algorithm 'NULL' > ricoh-mmc: Ricoh MMC Controller disabling driver > ricoh-mmc: Copyright(c) Philip Langdale > ricoh-mmc: Ricoh MMC controller found at 0000:44:06.2 [1180:0843] (rev 12) > ricoh-mmc: Controller is now disabled. > input: PC Speaker as /devices/platform/pcspkr/input/input9 > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 > iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460) > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > lis3lv02d: laptop model unknown, using default axes configuration > lis3lv02d: 1-byte sensor found > input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10 > lis3_init_device: irq 23 > lis3: registering device > Registered led device: hp::hddprotect > lis3lv02d driver loaded. > Bluetooth: Generic Bluetooth USB driver ver 0.5 > usbcore: registered new interface driver btusb > e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 > e1000e: Copyright (c) 1999-2008 Intel Corporation. > e1000e 0000:00:19.0: enabling device (0000 -> 0002) > e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > e1000e 0000:00:19.0: setting latency timer to 64 > alloc irq_desc for 29 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > e1000e 0000:00:19.0: irq 29 for MSI/MSI-X > tpm_inf_pnp 00:04: Found GTPM with ID IFX0102 > tpm_inf_pnp 00:04: TPM found: config base 0xfe00, data base 0xfe80, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) > SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts > 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:23:5a:34:9e:20 > 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection > 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1052ff-0ff > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > sdhci-pci 0000:44:06.1: SDHCI controller found [1180:0822] (rev 22) > sdhci-pci 0000:44:06.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 > Registered led device: mmc0:: > mmc0: SDHCI controller on PCI [0000:44:06.1] using PIO > iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds > iwlagn: Copyright(c) 2003-2009 Intel Corporation > iwlagn 0000:02:00.0: enabling device (0000 -> 0002) > iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > iwlagn 0000:02:00.0: setting latency timer to 64 > iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 > iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels > alloc irq_desc for 30 on cpu 0 node 0 > alloc kstat_irqs on cpu 0 node 0 > iwlagn 0000:02:00.0: irq 30 for MSI/MSI-X > firewire_ohci 0000:44:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > firewire_ohci 0000:44:06.0: setting latency timer to 64 > firewire_ohci: Added fw-ohci device 0000:44:06.0, OHCI version 1.10 > phy0: Selected rate control algorithm 'iwl-agn-rs' > firewire_core: created device fw0: GUID 5566778811223344, S400 > HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 > HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002) > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 > cfg80211: World regulatory domain updated: > (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > device-mapper: multipath: version 1.0.5 loaded > EXT3 FS on sda1, internal journal > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev sda3, type vfat), uses genfs_contexts > Adding 2047992k swap on /dev/sda2. Priority:-1 extents:1 across:2047992k > SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts > > -- > Matthew Garrett | mjg59(a)srcf.ucam.org > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo(a)vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > -- Matthew Garrett | mjg59(a)srcf.ucam.org -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Feng Tang on 20 Oct 2009 01:00
Hi Matthew, Could you try the following patch? I guess the bug is related to x86_32/64. Thanks, Feng ---------------------------------------------------------------- diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index ad5bd98..cdcfb12 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -454,8 +454,10 @@ void __init efi_init(void) if (add_efi_memmap) do_add_efi_memmap(); +#ifdef CONFIG_X86_32 x86_platform.get_wallclock = efi_get_time; x86_platform.set_wallclock = efi_set_rtc_mmss; +#endif /* Setup for EFI runtime service */ reboot_type = BOOT_EFI; On Tue, 20 Oct 2009 11:06:57 +0800 Matthew Garrett <mjg59(a)srcf.ucam.org> wrote: > This seems to be caused by 7bd867dfb4e0357e06a3211ab2bd0e714110def3 - > reverting that results in a booting kernel. Can't say I understand how > or why, but... > > On Tue, Oct 20, 2009 at 01:34:00AM +0100, Matthew Garrett wrote: > > 2.6.32-rc5 (and some earlier git checkout I had) fail to boot on my > > HP 2530p when using EFI - they boot fine with the BIOS emulation > > instead. I get an early exception when print_efi_memmap() is > > called, which implies that the memory map is broken somehow. Here's > > the dmesg for a working boot: > > > > Initializing cgroup subsys cpuset > > Initializing cgroup subsys cpu > > Linux version 2.6.30.8-64.fc11.x86_64 > > (mockbuild(a)x86-5.fedora.phx.redhat.com) (gcc version 4.4.1 20090725 > > (Red Hat 4.4.1-2) (GCC) ) #1 SMP Fri Sep 25 04:43:32 EDT 2009 > > Command line: ro root=UUID=fd334e23-080a-449d-8993-07758e5cd581 > > rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD > > AuthenticAMD Centaur CentaurHauls > > BIOS-provided physical RAM map: > > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > > BIOS-e820: 0000000000100000 - 0000000075a4c000 (usable) > > BIOS-e820: 0000000075a4c000 - 0000000075a4e000 (reserved) > > BIOS-e820: 0000000075a4e000 - 0000000076870000 (usable) > > BIOS-e820: 0000000076870000 - 0000000076880000 (ACPI NVS) > > BIOS-e820: 0000000076880000 - 0000000078fb1000 (usable) > > BIOS-e820: 0000000078fb1000 - 00000000791b1000 (ACPI NVS) > > BIOS-e820: 00000000791b1000 - 000000007a88f000 (usable) > > BIOS-e820: 000000007a88f000 - 000000007a9cf000 (reserved) > > BIOS-e820: 000000007a9cf000 - 000000007aacf000 (ACPI NVS) > > BIOS-e820: 000000007aacf000 - 000000007aaff000 (ACPI data) > > BIOS-e820: 000000007aaff000 - 000000007ab00000 (usable) > > BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) > > BIOS-e820: 00000000fffa0000 - 00000000fffa7000 (reserved) > > EFI v2.00 by INTEL > > ACPI=0x7aafe000 ACPI 2.0=0x7aafe014 SMBIOS=0x7a99f718 > > Kernel-defined memdesc doesn't match the one from EFI! -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ |