Prev: No iTunes store access
Next: Snow Leopard and MP4 movies
From: aRKay on 1 Sep 2009 21:56
In article <marc.heusser-2F4727.06430601092009(a)news.uzh.ch>,
Marc Heusser <marc.heusser(a)byeheusser.commercialspammers.invalid>
wrote:

> Up to now zero problems with 10.6, and the very few applications that
> had minor quirks have already been updated.
>
> Marc HB9ERT

Marc

Good to hear EchoMac is working. Have you tried fldigi? My concern is
with the old keyspanUSAdrvr.pkg software I use with the Keyspan USA-28x
Serial to USB adapter for rig control. Something tells tell me I may
run into trouble setting up the Hamlib for Rig control. This is why I
have been dragging my feet on upgrading to 10.6.

I would also like to know if you have tried the ARRL's tqsl for LoTW
under 10.6?

aRKay
From: Marc Heusser on 2 Sep 2009 13:06
In article <arkay-2C5FD5.20561901092009(a)news.eternal-september.org>,
aRKay <arkay(a)qsl.net> wrote:

> Good to hear EchoMac is working. Have you tried fldigi? My concern is
> with the old keyspanUSAdrvr.pkg software I use with the Keyspan USA-28x
> Serial to USB adapter for rig control. Something tells tell me I may
> run into trouble setting up the Hamlib for Rig control. This is why I
> have been dragging my feet on upgrading to 10.6.
>
> I would also like to know if you have tried the ARRL's tqsl for LoTW
> under 10.6?

No to both. Thanks for the pointers.
As long as you stay in 32 bit kernel (default), I would not expect
difficulties.
You might test by starting up from a partition with Snow Leopard on it,
and trying.
I intend to get a rig control with USB that needs no drivers, so I can
get around using Keyspan and RS-232.
All my machines are on Snow Leopard by now.

HTH

Marc

--
remove bye and from mercial to get valid e-mail
<http://www.heusser.com>
From: aRKay on 2 Sep 2009 23:31
In article <marc.heusser-677135.19055202092009(a)news.uzh.ch>,
Marc Heusser <marc.heusser(a)byeheusser.commercialspammers.invalid>
wrote:

> In article <arkay-2C5FD5.20561901092009(a)news.eternal-september.org>,
> aRKay <arkay(a)qsl.net> wrote:
>
> > Good to hear EchoMac is working. Have you tried fldigi? My concern is
> > with the old keyspanUSAdrvr.pkg software I use with the Keyspan USA-28x
> > Serial to USB adapter for rig control. Something tells tell me I may
> > run into trouble setting up the Hamlib for Rig control. This is why I
> > have been dragging my feet on upgrading to 10.6.
> >
> > I would also like to know if you have tried the ARRL's tqsl for LoTW
> > under 10.6?
>
> No to both. Thanks for the pointers.
> As long as you stay in 32 bit kernel (default), I would not expect
> difficulties.
> You might test by starting up from a partition with Snow Leopard on it,
> and trying.
> I intend to get a rig control with USB that needs no drivers, so I can
> get around using Keyspan and RS-232.
> All my machines are on Snow Leopard by now.
>
> HTH
>
> Marc


Marc,

I installed 10.6 today and all is working FB now. Fldigi with Rig
Control via hamlib with the Keyspan serial to USB adapter. All
apps I have tried work. The only glitch is the lame Time Machine
keep crapping out. The updated SuperDuper works great and
Samsung even posted a new 10.6 driver for my laster printer.

I am a happy camper
 | 
Pages: 1
Prev: No iTunes store access
Next: Snow Leopard and MP4 movies