Prev: HP 6500 OfficeJet wireless
Next: What's a DeskJet 500K?
From: jw on 2 Dec 2009 04:39 On Tue, 1 Dec 2009 22:01:36 -0800 (PST), Bob AZ <rwatson767(a)aol.com> wrote: >Sometimes with an Epson printer and Windows XP one will have to make >the setup for B&W and color in both the printer driver AND on the XP >Control Panel. > >So check the XP Control Panel/Printers & Faxes settings. Right click >on the installed printer to bring up the settings I think it is. > >Every so often I forget to do this and mess up trying to print. > >You have installed the printer by going to the XP Control Panel! > >Bob AZ Yes, I figured as much. I found the place in the computer's printer properties to choose black&white or color. I tried setting it to color with the same results. I have no way of knowing if the XP driver I have are the correct one, although it seemed to install okay. The printer itself came with drivers only up to NT, but not XP. FWIW I downloaded the driver I am using from driveragent.com. Duke
From: jw on 2 Dec 2009 04:46 On Tue, 01 Dec 2009 22:12:59 -0500, jw(a)eldorado.com wrote: >On Tue, 1 Dec 2009 17:33:58 -0500, "Jan Alter" <bearpuf(a)verizon.net> >wrote: > >>Write to Art Entlich >> eprinterhelp(at)mvps.org Substitute @ for (at) as the email >>address. >> >>Art has a marvelous free manual to give extensive suggestions to what one >>can do to get the printer clear of head clogs. He has nothing to sell you >>and simply does this to share knowledge and elucidate folks that they can >>maintain their Epson printers and fix problems that happen. >> Ask him to send you the manual nicely and he'll most likely oblige in >>addition to giving you some other suggestions to help getting the color >>section of the 3000 running again. > > >I did at > >eprinterhelp(a)mvps.org > >email was returned Delivery Notification: Delivery has failed > >Duke I found a corrected address at http://www.tomshardware.com/forum/20165-3-arthur-entlich-cleaning-manual namely - e-printerhelp(a)mvps.org Thanks Duke
From: Arthur Entlich on 2 Dec 2009 09:06 As a courtesy to me, since the service I provide is without any cost to anyone (but me) and is not a commercial venture, I ask that when people mention my email address that they do not expose it publicly in newsgroups in the standard form. Groups like usenet, yahoo, etc, are mined for valid email addresses. When my email address is exposed publicly like it was below by the OP (in three different usenet groups, no less) (I changed it so as to not further expose it) I, or my poor ISP get literally hundreds and thousands of spam emails to my address. That sometimes causes my address being shut down for days, which benefits no one. So, please do not list my address in public emails in the correct format. Instead use: e-printerhelp(at)mvps(dot)org (at) = @ (dot) = . Thank you. Art If you are interested in issues surrounding e-waste, I invite you to enter the discussion at my blog: http://e-trashtalk.spaces.live.com/ jw(a)eldorado.com wrote: > On Tue, 01 Dec 2009 22:12:59 -0500, jw(a)eldorado.com wrote: > >> On Tue, 1 Dec 2009 17:33:58 -0500, "Jan Alter" <bearpuf(a)verizon.net> >> wrote: >> >>> Write to Art Entlich >>> eprinterhelp(at)mvps.org Substitute @ for (at) as the email >>> address. >>> >>> Art has a marvelous free manual to give extensive suggestions to what one >>> can do to get the printer clear of head clogs. He has nothing to sell you >>> and simply does this to share knowledge and elucidate folks that they can >>> maintain their Epson printers and fix problems that happen. >>> Ask him to send you the manual nicely and he'll most likely oblige in >>> addition to giving you some other suggestions to help getting the color >>> section of the 3000 running again. >> >> I did at >> >> eprinterhelp(a)mvps.org >> >> email was returned Delivery Notification: Delivery has failed >> >> Duke > > > I found a corrected address at > http://www.tomshardware.com/forum/20165-3-arthur-entlich-cleaning-manual > > namely - e-printerhelp(at)mvps(dot)org > > Thanks > > Duke
From: Bob AZ on 3 Dec 2009 01:27 > I have no way of knowing if the XP driver I have are the correct one, > although it seemed to install okay. �The printer itself came with > drivers only up to NT, but not XP. �FWIW I downloaded the driver I am > using from driveragent.com. > > Duke Duke I googled "epson stylus 3000 driver" and it took me to the Epson site and there the drivers are there. I generally do not truust the drivers from a non manufacturers site if they are available from the manufacturer. Bob AZ
From: Anita on 4 Dec 2009 00:35 <jw(a)eldorado.com> wrote in message news:4qdch5prn40012p1duocgab2qcl7gvth64(a)4ax.com... > I found a corrected address at > http://www.tomshardware.com/forum/20165-3-arthur-entlich-cleaning-manual > > namely - e-print-rhelp@------.org .... and I'm sure he'll thank you for all the resultant spam you enabled for him by publicly posting his email address --- jerk.
First
|
Prev
|
Next
|
Last
Pages: 1 2 3 Prev: HP 6500 OfficeJet wireless Next: What's a DeskJet 500K? |