Error unsupported TCAM value size
in [Cisco]
|
From: DC on 7 Jul 2008 10:18 Does anyone know what could cause the error below. It's on a WS-C3750G-24TS-E with flash:c3750-ipservicesk9-mz.122-25.SEE/c3750-ipservicesk9-mz.122-25.SEE.bin !!! WARNING: The switch is not usable !!! Reason: Error unsupported TCAM value size Actual value = 1, Expected value = 40
From: Thrill5 on 7 Jul 2008 21:20 Does it boot without loading the configuration. If so, check the "SDM profile" in the startup-config. "DC" <user(a)nospam.net> wrote in message news:487225b7$0$7184$5a62ac22(a)per-qv1-newsreader-01.iinet.net.au... > Does anyone know what could cause the error below. It's on a > WS-C3750G-24TS-E with > flash:c3750-ipservicesk9-mz.122-25.SEE/c3750-ipservicesk9-mz.122-25.SEE.bin > > !!! WARNING: The switch is not usable !!! > Reason: > Error unsupported TCAM value size > Actual value = 1, Expected value = 40
From: Patrick on 7 Aug 2008 03:45 We also have a cisco 3750G-48-TS with same problem. I already tried to do a IOS upgrade but without result. The switch is not usable now. Is there a way to fix this? --------Hereby also a the ouput from the switch------ Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 12.2(25)SEE4, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Mon 16-Jul-07 03:24 by myl Image text-base: 0x00003000, data-base: 0x01040000 Initializing flashfs... flashfs[1]: 1 files, 1 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 32514048 flashfs[1]: Bytes used: 7216128 flashfs[1]: Bytes available: 25297920 flashfs[1]: flashfs fsck took 1 seconds. flashfs[1]: Initialization complete....done Initializing flashfs. Checking for Bootloader upgrade.. not needed front_end/ (directory) extracting front_end/fe_type_1 (34696 bytes) extracting front_end/fe_type_2 (54584 bytes) extracting front_end/front_end_ucode_info (86 bytes) extracting ucode_info (76 bytes) POST: CPU MIC register Tests : Begin POST: CPU MIC register Tests : End, Status Passed POST: PortASIC Memory Tests : Begin POST: PortASIC Memory Tests : End, Status Passed POST: CPU MIC PortASIC interface Loopback Tests : Begin POST: CPU MIC PortASIC interface Loopback Tests : End, Status Passed POST: PortASIC RingLoopback Tests : Begin POST: PortASIC RingLoopback Tests : End, Status Passed Waiting for Stack Master Election (around 30 seconds)... POST: PortASIC CAM Subsystem Tests : Begin Error unsupported TCAM value size Actual value = 1, Expected value = 40 POST: POST Pre Init Test Failed POST: PortASIC CAM Subsystem Tests : End, Status Failed POST: CAM test failed POST Failed: disabling stack links and shutting down SDP driver class subsystem initialization failed This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export(a)cisco.com. cisco WS-C3750G-48TS (PowerPC405) processor (revision C0) with 118784K/ 12280K bytes of memory. Processor board ID FCZ1017Y0AY Last reset from power-on The password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address : 00:17:5A:CC:FB:80 Motherboard assembly number : 73-9366-08 Power supply part number : 341-0107-01 Motherboard serial number : FOC10113NU3 Power supply serial number : AZS101200LC Model revision number : C0 Motherboard revision number : A0 Model number : WS-C3750G-48TS-S System serial number : FCZ1017Y0AY SFP Module assembly part number : 73-7757-03 SFP Module revision Number : A0 SFP Module serial number : CAT10040RT4 Top Assembly Part Number : 800-25409-02 Top Assembly Revision Number : B0 Version ID : V02 CLEI Code Number : CNMWU00ARB Hardware Board Revision Number : 0x05 !!! WARNING: The switch is not usable !!! Reason: Error unsupported TCAM value size Actual value = 1, Expected value = 40 Unable to create l2trace server process, socket_open() failed Press RETURN to get started! 00:00:43: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlanCannot Get the number of ports in MAC notification 00:00:43: %SW_VLAN-4-IFS_FAILURE: VLAN manager encountered file operation error: call = ifs_read_until (header) / file = / code = 21 (Is a directory) / bytes transfered = -1 -Traceback= AFFD58 1A7FB0 1A4048 909AAC 90000C 00:00:45: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 12.2(25)SEE4, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Mon 16-Jul-07 03:24 by myl 00:00:45: Unable to open UDP socket on CMP_PORT 00:00:50: %SYS-2-CHUNKINVALIDHDR: Invalid chunk header type 31744 for chunk 0, data 2C032000 -Process= "HULC multifs process", ipl= 0, pid= 38 -Traceback= AFFD58 E4BF84 575C98 576DE8 577F54 50D3EC 50D764 909AAC 90000C !!! WARNING: The switch is not usable !!! Reason: Error unsupported TCAM value size Actual value = 1, Expected value = 40 Switch>
From: Merv on 7 Aug 2008 09:53 It is a hardware failure
|
Pages: 1 Prev: Policy Based Routing and/or NAT Next: VPN Not Routing, Reboot Fixes it. |