Globally Change a Bus Envelope
in [Cakewalk]
|
Prev: Update 2
Next: Send sound to 2 sets of spkrs?
From: Neil Rutman on 26 Feb 2010 15:05 I have a volume envelope over my entire bass bus track. I would like to lower the volume of the entire envelope from start to end. There's many nodes all throughout so doing it with the mouse will be very tedious. Thanks, Neil R
From: Nil on 26 Feb 2010 15:27 On 26 Feb 2010, "Neil Rutman" <neilrut(a)speakeasy.net> wrote in cakewalk.audio: > I have a volume envelope over my entire bass bus track. I would > like to lower the volume of the entire envelope from start to end. > There's many nodes all throughout so doing it with the mouse will > be very tedious. If you select the entire clip, all the envelope nodes will be selected as well, so it will move as one. For some reason, the last node doesn't get selected, though, so if you want that one, too, you need to hole the Ctrl key and click it to add it to the rest of the selected nodes. You might also want to look at the topic "Envelope Mode and Offset Mode" in the help file - maybe that will fit your situation better.
From: Steve_Karl on 26 Feb 2010 18:20 Switch your tool to the envelope tool. Highlight the first node ... hold down SHFT and then click the last node. The next step is most easily done with the buss taking up the whole screen so maximize it. Then just grab and drag it to where you want. Yea ... I know ... the numerical readout probably won't make sense until you stop dragging. It's been that way since 3.0 ... but other than doing it all manually ... ....Well... You could also just route that bass bus to a new bus called bas2 and put a new envelope on that bus which will then control the first. sk "Neil Rutman" <neilrut(a)speakeasy.net> wrote in message news:orednRi1g_E7tBXWnZ2dnUVZ_qOdnZ2d(a)speakeasy.net... >I have a volume envelope over my entire bass bus track. I would like to lower the volume of the entire envelope from start to end. >There's many nodes all throughout so doing it with the mouse will be very tedious. > > Thanks, > > Neil R > >
From: Neil Rutman on 26 Feb 2010 19:32 All good suggestions. Thanks! Neil R "Steve_Karl" <nospam(a)noway.com> wrote in message news:hm9kv6$afh$1(a)news.eternal-september.org... > Switch your tool to the envelope tool. > Highlight the first node ... hold down SHFT and then click the last node. > The next step is most easily done with the buss taking up the whole screen > so maximize it. > Then just grab and drag it to where you want. > Yea ... I know ... the numerical readout probably won't make sense until > you stop dragging. > It's been that way since 3.0 ... but other than doing it all manually ... > > ...Well... > > You could also just route that bass bus to a new bus called bas2 and put a > new envelope on that bus > which will then control the first. > > sk > > > > > "Neil Rutman" <neilrut(a)speakeasy.net> wrote in message > news:orednRi1g_E7tBXWnZ2dnUVZ_qOdnZ2d(a)speakeasy.net... >>I have a volume envelope over my entire bass bus track. I would like to >>lower the volume of the entire envelope from start to end. There's many >>nodes all throughout so doing it with the mouse will be very tedious. >> >> Thanks, >> >> Neil R >> >> > >
From: John Braner on 27 Feb 2010 05:38
On 27/02/2010 00:32, Neil Rutman wrote: > All good suggestions. Thanks! > > Neil R > > "Steve_Karl"<nospam(a)noway.com> wrote in message > news:hm9kv6$afh$1(a)news.eternal-september.org... >> Switch your tool to the envelope tool. >> Highlight the first node ... hold down SHFT and then click the last node. >> The next step is most easily done with the buss taking up the whole screen >> so maximize it. >> Then just grab and drag it to where you want. >> Yea ... I know ... the numerical readout probably won't make sense until >> you stop dragging. >> It's been that way since 3.0 ... but other than doing it all manually ... >> >> ...Well... >> >> You could also just route that bass bus to a new bus called bas2 and put a >> new envelope on that bus >> which will then control the first. >> >> sk >> >> >> >> >> "Neil Rutman"<neilrut(a)speakeasy.net> wrote in message >> news:orednRi1g_E7tBXWnZ2dnUVZ_qOdnZ2d(a)speakeasy.net... >>> I have a volume envelope over my entire bass bus track. I would like to >>> lower the volume of the entire envelope from start to end. There's many >>> nodes all throughout so doing it with the mouse will be very tedious. >>> >>> Thanks, >>> >>> Neil R >>> >>> >> >> > > Neil, You know if you use offset mode (I always stay in offset mode) that this will affect the whole track like adjusting the envelope? So, for example, you have a complicated envelope on the track - just go to offset mode and lower the velocity - that will bring th ewhole track down. Another way to put it - when you're not in offset mode, you see the velocity control going up and down with the envelope settings - but in offset mode you don't see this. You would "offset" the velocity, and *then* the envelope takes effect. This is harder to type than to actually do ;-) -- =========== John Braner jbraner(a)NOblueyonderSPAM.co.uk http://cdbaby.com/cd/JohnBraner http://www.soundclick.com/johnbraner |