Prev: PWM generation using TMS320F2812
Next: FlashAPIInterface.c
From: qhe on 2 Sep 2005 12:31
Postponed for several months, HCIE-218x is finished at last.

http://energy.51.net/hice218x/index.htm

HICE-218x is another emulator for ADSP-218x family fixed-point DSPs. It's
compatible with EZ-ICE-218x, but with a few improvements:

* USB2.0 interface, powered by USB, no AC adapter needed
* Working at 460800 bps by virtual serial port and baud rate aliasing
* Thoroughly optimized timing makes it much faster than EZ-ICE-218X
* Hardware stepping, no limitation on "last instruction of do-until loop"
* Support 5V, 3.3V, 2.5V and 1.8V DSP chips
* Work with VisualDSP 6.1, VisualDSP++ 3.5
* many others...

HICE-218x is compatible but not a clone of EZ-ICE-218x. Both the PCB and the
firmware are totally new design. The timing of EZICE interface is studied
and optimized thoroughly, which improved the speed of HICE-218x
significantly.

Furthermore, the hardware stepping technology is implemented. Unlike
EZ-ICE-218X, HICE-218x does not predict the next addresses and put "trap"
instructions everywhere, so limitations caused by software stepping are
eliminated. For example, with EZ-ICE-218x you can't step at the end of a
do-until loop, else there will be an error message box popped up, but with
HICE-218x, the stepping just work fine.

HICE-218x is cheap, the price will be around USD330.

Contact:
obase_at_tom_dot_com
qhe_at_tsinghua_dot_org_dot_cn


 | 
Pages: 1
Prev: PWM generation using TMS320F2812
Next: FlashAPIInterface.c