Prev: Crydom SSRs - tips?
Next: Looking for a small bedside am/fm radio with station buttons andwireless headset
From: Searcher7 on 10 Apr 2010 10:58
On Mar 2, 8:24 pm, "Paul E. Schoen" <p...(a)peschoen.com> wrote:
> "Bleep" <bl...(a)bleep.in> wrote in message
>
> news:deKdnQx2QZdSHBDWnZ2dnUVZ_rmdnZ2d(a)earthlink.com...
>
>
>
> > Also, maybe these sites will help you out:
>
> >http://electronicsusa.com/productsboxes.html
>
> >http://www.westnc.com/boxomni.html
>
> >http://www.all-spec.com/products/Storage_and_Handling|Containers|CON-06/?x=25&i=1&f=p
>
> > Well, hopefully one of those gives you some ideas...
>
> Another possibility is to use one of the new blue plastic electrical boxes.
> I've seen them as cheap as 20 cents each. They are certainly rugged enough,
> but rather ugly.
>
> Paul

Thanks everyone. All those links came in handy.

Darren Harris
Staten Island, New York.
From: Searcher7 on 24 Apr 2010 21:49
On Apr 10, 10:58 am, Searcher7 <Search...(a)mail.con2.com> wrote:
> On Mar 2, 8:24 pm, "Paul E. Schoen" <p...(a)peschoen.com> wrote:
>
>
>
> > "Bleep" <bl...(a)bleep.in> wrote in message
>
> >news:deKdnQx2QZdSHBDWnZ2dnUVZ_rmdnZ2d(a)earthlink.com...
>
> > > Also, maybe these sites will help you out:
>
> > >http://electronicsusa.com/productsboxes.html
>
> > >http://www.westnc.com/boxomni.html
>
> > >http://www.all-spec.com/products/Storage_and_Handling|Containers|CON-06/?x=25&i=1&f=p
>
> > > Well, hopefully one of those gives you some ideas...
>
> > Another possibility is to use one of the new blue plastic electrical boxes.
> > I've seen them as cheap as 20 cents each. They are certainly rugged enough,
> > but rather ugly.
>
> > Paul
>
> Thanks everyone. All those links came in handy.
>
> Darren Harris
> Staten Island, New York.

Does anyone have any idea on how to secure 24 position straight header
pins to one of these project boxes?

With normal PCBs it would be solder that secures the pins, but this
obviously will not work with these plastic boxes. So after I find the
correct size drill to make the holes in the box for the pins I have to
use some sort of cement top keep the header in place.

http://arcadecontrols.com/BBBB/header24.jpg
http://arcadecontrols.com/BBBB/24inline.jpg

http://www.all-spec.com/products/Storage_and_Handling|Containers|CON-06/663-321.html

Thanks a lot.

Darren Harris
Staten Island, New York.
From: Jasen Betts on 25 Apr 2010 04:00
On 2010-04-25, Searcher7 <Searcher7(a)mail.con2.com> wrote:
> On Apr 10, 10:58 am, Searcher7 <Search...(a)mail.con2.com> wrote:
>> On Mar 2, 8:24 pm, "Paul E. Schoen" <p...(a)peschoen.com> wrote:
>>
>>
>>
>> > "Bleep" <bl...(a)bleep.in> wrote in message
>>
>> >news:deKdnQx2QZdSHBDWnZ2dnUVZ_rmdnZ2d(a)earthlink.com...
>>
>> > > Also, maybe these sites will help you out:
>>
>> > >http://electronicsusa.com/productsboxes.html
>>
>> > >http://www.westnc.com/boxomni.html
>>
>> > >http://www.all-spec.com/products/Storage_and_Handling|Containers|CON-06/?x=25&i=1&f=p
>>
>> > > Well, hopefully one of those gives you some ideas...
>>
>> > Another possibility is to use one of the new blue plastic electrical boxes.
>> > I've seen them as cheap as 20 cents each. They are certainly rugged enough,
>> > but rather ugly.
>>
>> > Paul
>>
>> Thanks everyone. All those links came in handy.
>>
>> Darren Harris
>> Staten Island, New York.
>
> Does anyone have any idea on how to secure 24 position straight header
> pins to one of these project boxes?
>
> With normal PCBs it would be solder that secures the pins, but this
> obviously will not work with these plastic boxes. So after I find the
> correct size drill to make the holes in the box for the pins I have to
> use some sort of cement top keep the header in place.
>
> http://arcadecontrols.com/BBBB/header24.jpg
> http://arcadecontrols.com/BBBB/24inline.jpg
>
> http://www.all-spec.com/products/Storage_and_Handling|Containers|CON-06/663-321.html
>
> Thanks a lot.
>
> Darren Harris
> Staten Island, New York.


the type of cement that's best used depends on what sort of plastic it is.


can you solder the header to a PCB and then bolt the PCB to the case?


another option could be drilling undersize holes for each pin and
forcing the pins in, but the website says that the case is conductive.

if you go this route expect in the ballpark of 1K resistance between adjacent pins.


--- news://freenews.netfront.net/ - complaints: news(a)netfront.net ---
From: Searcher7 on 25 Apr 2010 21:15
On Apr 25, 4:00 am, Jasen Betts <ja...(a)xnet.co.nz> wrote:
> On 2010-04-25, Searcher7 <Search...(a)mail.con2.com> wrote:
>
>
>
> > On Apr 10, 10:58 am, Searcher7 <Search...(a)mail.con2.com> wrote:
> >> On Mar 2, 8:24 pm, "Paul E. Schoen" <p...(a)peschoen.com> wrote:
>
> >> > "Bleep" <bl...(a)bleep.in> wrote in message
>
> >> >news:deKdnQx2QZdSHBDWnZ2dnUVZ_rmdnZ2d(a)earthlink.com...
>
> >> > > Also, maybe these sites will help you out:
>
> >> > >http://electronicsusa.com/productsboxes.html
>
> >> > >http://www.westnc.com/boxomni.html
>
> >> > >http://www.all-spec.com/products/Storage_and_Handling|Containers|CON-06/?x=25&i=1&f=p
>
> >> > > Well, hopefully one of those gives you some ideas...
>
> >> > Another possibility is to use one of the new blue plastic electrical boxes.
> >> > I've seen them as cheap as 20 cents each. They are certainly rugged enough,
> >> > but rather ugly.
>
> >> > Paul
>
> >> Thanks everyone. All those links came in handy.
>
> >> Darren Harris
> >> Staten Island, New York.
>
> > Does anyone have any idea on how to secure 24 position straight header
> > pins to one of these project boxes?
>
> > With normal PCBs it would be solder that secures the pins, but this
> > obviously will not work with these plastic boxes. So after I find the
> > correct size drill to make the holes in the box for the pins I have to
> > use some sort of cement top keep the header in place.
>
> >http://arcadecontrols.com/BBBB/header24.jpg
> >http://arcadecontrols.com/BBBB/24inline.jpg
>
> >http://www.all-spec.com/products/Storage_and_Handling|Containers|CON-06/663-321.html
>
> > Thanks a lot.
>
> > Darren Harris
> > Staten Island, New York.
>
> the type of cement that's best used depends on what sort of plastic it is..

Do you know of a site that sells cements for this purpose?

> can you solder the header to a PCB and then bolt the PCB to the case?

I thought about that, since the already existing PCB will already be
secured inside using stand-offs it makes this difficult.

> another option could be drilling undersize holes for each pin and
> forcing the pins in, but the website says that the case is conductive.
>
> if you go this route expect in the ballpark of 1K resistance between adjacent pins.
>
> --- news://freenews.netfront.net/ - complaints: n...(a)netfront.net ---

I was just thinking. Since I'll be using stand-offs, perhaps I don't
need a conductive box.(Even though PCBs with circuits etched in them
are considered "static sensitive devices"). So I'm back to square one
as far as finding a place to purchase these boxes. So far the
distributors I've checked have huge minimum or they don't have the
size I need.

Darren Harris
Staten Island, New York.
From: Jasen Betts on 26 Apr 2010 05:26
On 2010-04-26, Searcher7 <Searcher7(a)mail.con2.com> wrote:
> On Apr 25, 4:00 am, Jasen Betts <ja...(a)xnet.co.nz> wrote:
>> On 2010-04-25, Searcher7 <Search...(a)mail.con2.com> wrote:
>>
>>
>>
>> > On Apr 10, 10:58 am, Searcher7 <Search...(a)mail.con2.com> wrote:
>> >> On Mar 2, 8:24 pm, "Paul E. Schoen" <p...(a)peschoen.com> wrote:
>>
>> >> > "Bleep" <bl...(a)bleep.in> wrote in message
>>
>> >> >news:deKdnQx2QZdSHBDWnZ2dnUVZ_rmdnZ2d(a)earthlink.com...
>>
>> >> > > Also, maybe these sites will help you out:
>>
>> >> > >http://electronicsusa.com/productsboxes.html
>>
>> >> > >http://www.westnc.com/boxomni.html
>>
>> >> > >http://www.all-spec.com/products/Storage_and_Handling|Containers|CON-06/?x=25&i=1&f=p
>>
>> >> > > Well, hopefully one of those gives you some ideas...
>>
>> >> > Another possibility is to use one of the new blue plastic electrical boxes.
>> >> > I've seen them as cheap as 20 cents each. They are certainly rugged enough,
>> >> > but rather ugly.
>>
>> >> > Paul
>>
>> >> Thanks everyone. All those links came in handy.
>>
>> >> Darren Harris
>> >> Staten Island, New York.
>>
>> > Does anyone have any idea on how to secure 24 position straight header
>> > pins to one of these project boxes?
>>
>> > With normal PCBs it would be solder that secures the pins, but this
>> > obviously will not work with these plastic boxes. So after I find the
>> > correct size drill to make the holes in the box for the pins I have to
>> > use some sort of cement top keep the header in place.
>>
>> >http://arcadecontrols.com/BBBB/header24.jpg
>> >http://arcadecontrols.com/BBBB/24inline.jpg
>>
>> >http://www.all-spec.com/products/Storage_and_Handling|Containers|CON-06/663-321.html
>>
>> > Thanks a lot.
>>
>> > Darren Harris
>> > Staten Island, New York.
>>
>> the type of cement that's best used depends on what sort of plastic it is.
>
> Do you know of a site that sells cements for this purpose?

no, but plumbers do a lot of solvent welding of plastic, but first you
need to know what type of plastic.

>> can you solder the header to a PCB and then bolt the PCB to the case?
>
> I thought about that, since the already existing PCB will already be
> secured inside using stand-offs it makes this difficult.

> I was just thinking. Since I'll be using stand-offs, perhaps I don't
> need a conductive box.(Even though PCBs with circuits etched in them
> are considered "static sensitive devices").

how about a longer than usual header to compensate for the stand-offs?

static sensitivity depends on the circuitry inside the case (I'm
guessing EEPROMS, so it could be a proble)





--- news://freenews.netfront.net/ - complaints: news(a)netfront.net ---
 |  Next  |  Last
Pages: 1 2
Prev: Crydom SSRs - tips?
Next: Looking for a small bedside am/fm radio with station buttons andwireless headset