Prev: replacing the screen on a PSP
Next: Power Suplly Model. PDD 3502A - Wayne Kerr
From: Con244 on 10 May 2010 22:38
Hi,
Sorry if this is not the right group to post in.
I have just purchased a car with a Nokia CARK126 car kit installed.. This
comprises a HF U4 main box with a cable to connect a Nokia Pop port phone
to the car kit. It has a pop port connector at one end and a plug similar to
a RJ50 which goes into the HF U4 unit. My phone is a newer Nokia 6300
Classic and does not have a pop port on it but does have a 4 segment 2.5 mm
stereo type socket for a stereo hands free unit to plug into. Is it possible
to either buy or make some sort of adaptor to allow my phone to work with
this car kit? If so does anyone have a diagram as to how to connect it up
wiring wise? I do have the pin outs for all the different plugs, is it just
a matter of connecting up the corresponding wires?
Thanks in advance
Con

From: William R. Walsh on 11 May 2010 17:05
Hi!

If you've got the pinouts and you're **sure** they are correct, I
don't see much opportunity for any damage as long as you make sure
your wiring is correct.

Speaker and microphone connections on the phone and the car kit are
unlikely to cause damage to anything if you don't get them quite
right. However, anything to do with powering the phone or charging it
can ruin your day if it's not compatible (have you checked the voltage
and polarity?) or not the appropriate voltage/current output.

William
 | 
Pages: 1
Prev: replacing the screen on a PSP
Next: Power Suplly Model. PDD 3502A - Wayne Kerr