Prev: RCA Model P52927 Won't turn on and makes a chirping sound
Next: Toshiba TP55H60 Horizontal Output Problem
From: rbumeter@charter.net on 28 Nov 2005 19:34
Can anyone assist. This rear projection set is about 4 years old.
Suddenly this morning, after only having been on a very short time,
several minutes, the screen changed. The upper 1/3 of the picture is
now shadowing the images presented, and the color is somewhat
distorted.
Rick

From: dkuhajda@locl.net on 28 Nov 2005 19:36
Beyond making sure the mirror did not fall out of position in the rear
of the set, the only thing that needs done is to troubleshoot and
repair the convergence circuitry. It could be the outputs, power
supply, or digital convergence module causing the problem.

From: rbumeter@charter.net on 28 Nov 2005 19:43
Thank you for the reply. I am guessing I need special equipment to do
that kind of testing? Would you recommend just contacting a service to
come and check it out or is this something I can do some basic
troubleshooting on myself?

From: Shoreline Electronics on 29 Nov 2005 07:45
No...don't even open it. The set needs repair to the convergence circuit.

Go to www.nesda.com and look up a servicer in your area.

Or check on Hitachi's site http://www.hitachiserviceusa.com/ for a
authorized servicer.



==========================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
860-399-1861
860-664-3535 (fax)
jstielau(a)snet.net
========================

<rbumeter(a)charter.net> wrote in message
news:1133224989.827395.33450(a)g47g2000cwa.googlegroups.com...
> Thank you for the reply. I am guessing I need special equipment to do
> that kind of testing? Would you recommend just contacting a service to
> come and check it out or is this something I can do some basic
> troubleshooting on myself?
>


 | 
Pages: 1
Prev: RCA Model P52927 Won't turn on and makes a chirping sound
Next: Toshiba TP55H60 Horizontal Output Problem