Installation of Oracle patch p5337014_10203_LINUX.zip on linux.
in [Oracle]
|
From: sybrandb on 21 Aug 2008 05:44 On Wed, 20 Aug 2008 22:13:31 -0700 (PDT), sagar.maheshwari(a)daffodilsw.com wrote: >Hello All, >I got the folowing Error when I install Oracle patch >p5337014_10203_LINUX.zip on linux. > >>>Error in invoking target 'Client_sharedlib' of makefile ins_net_client.mk > > >When I execute "relink client_sharedlib" ,I got the following output.. > >/home/oracle/oracle/product/10.2.0/db_1/bin/genclntsh >/usr/bin/ld: skipping incompatible /home/oracle/oracle/product/10.2.0/ >db_1/lib/libsql10.a when searching for -lsql10 >/usr/bin/ld: cannot find -lsql10 >collect2: ld returned 1 exit status >genclntsh: Failed to link libclntsh.so.10.1 >make: ** [client_sharedlib] Error 1 > >Thanks in advance! >sagar As this is a patch you must have got from Metalink, it surprises me you aren't addressing this by submitting a SR. --
From: Vladimir M. Zakharychev on 21 Aug 2008 05:47 On Aug 21, 1:13 pm, sagar.maheshw...(a)daffodilsw.com wrote: > On Aug 21, 11:40 am, "Vladimir M. Zakharychev" > > > > <vladimir.zakharyc...(a)gmail.com> wrote: > > On Aug 21, 9:13 am, sagar.maheshw...(a)daffodilsw.com wrote: > > > > Hello All, > > > I got the folowing Error when I install Oracle patch > > > p5337014_10203_LINUX.zip on linux. > > > > >>Error in invoking target 'Client_sharedlib' of makefile ins_net_client.mk > > > > When I execute "relink client_sharedlib" ,I got the following output... > > > > /home/oracle/oracle/product/10.2.0/db_1/bin/genclntsh > > > /usr/bin/ld: skipping incompatible /home/oracle/oracle/product/10.2.0/ > > > db_1/lib/libsql10.a when searching for -lsql10 > > > /usr/bin/ld: cannot find -lsql10 > > > collect2: ld returned 1 exit status > > > genclntsh: Failed to link libclntsh.so.10.1 > > > make: ** [client_sharedlib] Error 1 > > > > Thanks in advance! > > > sagar > > > Linux flavor? Is it x86 or x86-64? Is Oracle 32-bit or 64-bit? Make > > sure you installed proper architecture - it seems Oracle doesn't > > support installing Oracle for Linux_x86 on Linux_x86-64. Can also be > > that your initial installation is x86-64, but the patchset is for x86. > > Metalink has a few notes that might be of help, namely 368365.1, > > 334329.1, 460969.1. > > > And by the way, latest patchset for 10.2 is 10.2.0.4, I would > > recommend that you jump right to it. > > > Hth, > > Vladimir M. Zakharychev > > N-Networks, makers of Dynamic PSP(tm) > > http://www.dynamicpsp.com > > > Hi, Vladimir M. Zakharychev > My linux is x86-64.i > installed oracle enterprise(10.2.0.1) sucessfully.but my patch give > error.i don't know my patch is for x86_64 or x-86??how can i know this > thing?? > > thanks From the file name I can tell the patchset is 32-bit. If your Oracle is 64-bit, this patchset probably wouldn't apply at all because they check the platform, so I assume it's 32-bit either. Review the Metalink notes I referred earlier, they have some clues on how you need to configure gcc to allow correct linkage of 32-bit libraries. However, if Oracle is 64-bit, p5337014_10203_Linux-x86-64.zip should've been downloaded and applied instead. 64-bit Oracle contains some 32-bit components, so the patchset could actually patch those only leaving the 64-bit part untouched. Regards, Vladimir M. Zakharychev N-Networks, makers of Dynamic PSP(tm) http://www.dynamicpsp.com
From: sagar.maheshwari on 21 Aug 2008 06:14 On Aug 21, 2:47 pm, "Vladimir M. Zakharychev" <vladimir.zakharyc...(a)gmail.com> wrote: > On Aug 21, 1:13 pm, sagar.maheshw...(a)daffodilsw.com wrote: > > > > > > > On Aug 21, 11:40 am, "Vladimir M. Zakharychev" > > > <vladimir.zakharyc...(a)gmail.com> wrote: > > > On Aug 21, 9:13 am, sagar.maheshw...(a)daffodilsw.com wrote: > > > > > Hello All, > > > > I got the folowing Error when I install Oracle patch > > > > p5337014_10203_LINUX.zip on linux. > > > > > >>Error in invoking target 'Client_sharedlib' of makefile ins_net_client.mk > > > > > When I execute "relink client_sharedlib" ,I got the following output.. > > > > > /home/oracle/oracle/product/10.2.0/db_1/bin/genclntsh > > > > /usr/bin/ld: skipping incompatible /home/oracle/oracle/product/10.2..0/ > > > > db_1/lib/libsql10.a when searching for -lsql10 > > > > /usr/bin/ld: cannot find -lsql10 > > > > collect2: ld returned 1 exit status > > > > genclntsh: Failed to link libclntsh.so.10.1 > > > > make: ** [client_sharedlib] Error 1 > > > > > Thanks in advance! > > > > sagar > > > > Linux flavor? Is it x86 or x86-64? Is Oracle 32-bit or 64-bit? Make > > > sure you installed proper architecture - it seems Oracle doesn't > > > support installing Oracle for Linux_x86 on Linux_x86-64. Can also be > > > that your initial installation is x86-64, but the patchset is for x86.. > > > Metalink has a few notes that might be of help, namely 368365.1, > > > 334329.1, 460969.1. > > > > And by the way, latest patchset for 10.2 is 10.2.0.4, I would > > > recommend that you jump right to it. > > > > Hth, > > > Vladimir M. Zakharychev > > > N-Networks, makers of Dynamic PSP(tm) > > > http://www.dynamicpsp.com > > > Hi, Vladimir M. Zakharychev > > My linux is x86-64.i > > installed oracle enterprise(10.2.0.1) sucessfully.but my patch give > > error.i don't know my patch is for x86_64 or x-86??how can i know this > > thing?? > > > thanks > > From the file name I can tell the patchset is 32-bit. If your Oracle > is 64-bit, this patchset probably wouldn't apply at all because they > check the platform, so I assume it's 32-bit either. Review the > Metalink notes I referred earlier, they have some clues on how you > need to configure gcc to allow correct linkage of 32-bit libraries. > However, if Oracle is 64-bit, p5337014_10203_Linux-x86-64.zip > should've been downloaded and applied instead. 64-bit Oracle contains > some 32-bit components, so the patchset could actually patch those > only leaving the 64-bit part untouched. > > Regards, > Vladimir M. Zakharychev > N-Networks, makers of Dynamic PSP(tm) > http://www.dynamicpsp.com- Hide quoted text - > > - Show quoted text - Vladimir M. Zakharychev, Thanks for ur rpl.one more qus: if i use oracle 32bit with this patch on linux x86-64. then will this combination work?? thanks sagar
From: Vladimir M. Zakharychev on 22 Aug 2008 01:39 On Aug 21, 2:14 pm, sagar.maheshw...(a)daffodilsw.com wrote: > On Aug 21, 2:47 pm, "Vladimir M. Zakharychev" > > > > <vladimir.zakharyc...(a)gmail.com> wrote: > > On Aug 21, 1:13 pm, sagar.maheshw...(a)daffodilsw.com wrote: > > > > On Aug 21, 11:40 am, "Vladimir M. Zakharychev" > > > > <vladimir.zakharyc...(a)gmail.com> wrote: > > > > On Aug 21, 9:13 am, sagar.maheshw...(a)daffodilsw.com wrote: > > > > > > Hello All, > > > > > I got the folowing Error when I install Oracle patch > > > > > p5337014_10203_LINUX.zip on linux. > > > > > > >>Error in invoking target 'Client_sharedlib' of makefile ins_net_client.mk > > > > > > When I execute "relink client_sharedlib" ,I got the following output.. > > > > > > /home/oracle/oracle/product/10.2.0/db_1/bin/genclntsh > > > > > /usr/bin/ld: skipping incompatible /home/oracle/oracle/product/10..2.0/ > > > > > db_1/lib/libsql10.a when searching for -lsql10 > > > > > /usr/bin/ld: cannot find -lsql10 > > > > > collect2: ld returned 1 exit status > > > > > genclntsh: Failed to link libclntsh.so.10.1 > > > > > make: ** [client_sharedlib] Error 1 > > > > > > Thanks in advance! > > > > > sagar > > > > > Linux flavor? Is it x86 or x86-64? Is Oracle 32-bit or 64-bit? Make > > > > sure you installed proper architecture - it seems Oracle doesn't > > > > support installing Oracle for Linux_x86 on Linux_x86-64. Can also be > > > > that your initial installation is x86-64, but the patchset is for x86. > > > > Metalink has a few notes that might be of help, namely 368365.1, > > > > 334329.1, 460969.1. > > > > > And by the way, latest patchset for 10.2 is 10.2.0.4, I would > > > > recommend that you jump right to it. > > > > > Hth, > > > > Vladimir M. Zakharychev > > > > N-Networks, makers of Dynamic PSP(tm) > > > > http://www.dynamicpsp.com > > > > Hi, Vladimir M. Zakharychev > > > My linux is x86-64.i > > > installed oracle enterprise(10.2.0.1) sucessfully.but my patch give > > > error.i don't know my patch is for x86_64 or x-86??how can i know this > > > thing?? > > > > thanks > > > From the file name I can tell the patchset is 32-bit. If your Oracle > > is 64-bit, this patchset probably wouldn't apply at all because they > > check the platform, so I assume it's 32-bit either. Review the > > Metalink notes I referred earlier, they have some clues on how you > > need to configure gcc to allow correct linkage of 32-bit libraries. > > However, if Oracle is 64-bit, p5337014_10203_Linux-x86-64.zip > > should've been downloaded and applied instead. 64-bit Oracle contains > > some 32-bit components, so the patchset could actually patch those > > only leaving the 64-bit part untouched. > > > Regards, > > Vladimir M. Zakharychev > > N-Networks, makers of Dynamic PSP(tm) > > http://www.dynamicpsp.com-Hide quoted text - > > > - Show quoted text - > > Vladimir M. Zakharychev, > Thanks for ur rpl.one more qus: if > i use oracle 32bit with this patch on linux x86-64. > then will this combination work?? > thanks > sagar Unlikely. First of all, x86-64 patch is not for x86 Oracle, don't even try applying it if your Oracle is 32-bit. Secondly, as far as I can tell, Oracle doesn't support 32-bit Oracle on 64-bit Linux (at least it's not a certified combination,) so you should expect all sorts of problems with such combo. Most likely you will need to hack the compiler and linker to properly compile and link 32-bit objects on 64- bit platform. Check those Metalink notes I recommended in my first reply. The rule for choosing the right architecture is like this: 32-bit Oracle on 32-bit OS is fine, 32-bit Oracle on 64-bit OS is problematic, but usually possible with some effort, 64-bit Oracle on 32-bit OS won't run, 64-bit Oracle on 64-bit OS is fine. So as long as you match the OS and Oracle bitness things should work just fine. As soon as you start mixing 32-bit with 64-bit expect extra effort on OS side to make it work. Regards, Vladimir M. Zakharychev N-Networks, makers of Dynamic PSP(tm) http://www.dynamicpsp.com
From: Shakespeare on 22 Aug 2008 04:40
<sagar.maheshwari(a)daffodilsw.com> schreef in bericht news:c1f0c385-b4aa-4ceb-aeba-2357b23a3dfc(a)w39g2000prb.googlegroups.com... > Hello All, > I got the folowing Error when I install Oracle patch > p5337014_10203_LINUX.zip on linux. > >>>Error in invoking target 'Client_sharedlib' of makefile ins_net_client.mk > > > When I execute "relink client_sharedlib" ,I got the following output.. > > /home/oracle/oracle/product/10.2.0/db_1/bin/genclntsh > /usr/bin/ld: skipping incompatible /home/oracle/oracle/product/10.2.0/ > db_1/lib/libsql10.a when searching for -lsql10 > /usr/bin/ld: cannot find -lsql10 > collect2: ld returned 1 exit status > genclntsh: Failed to link libclntsh.so.10.1 > make: ** [client_sharedlib] Error 1 > > Thanks in advance! > sagar > Your problem is exactly described in note 371683.1. You did use the wrong patch set. If you do run 32bit Oracle on 64bit OS, you could try to set your library path to the right directory (lib32) but it's not supported. Shakespeare |