From: Chuck on
On Thu, 10 Jun 2010 09:44:12 -0400, JW <none(a)dev.null> wrote:

>Can anyone recommend a good isolation transformer for sale on-line?
>Need one that will handle 5 amps or so at 120VAC, and have a standard AC
>plug at the outlet. Prefer one for less than $100 or so, unless that seems
>unreasonable. Found one at Mouser for $114 but that's only good for 1.25A.
>Getting lots of irrelevant hits on google...
>
>Thanks.


MCM Electronics has one. Chuck
From: Phil Allison on

"Chuck"


> MCM Electronics has one.


** One what ??




..... Phil


From: Dave Plowman (News) on
In article <87dee7Fdj9U1(a)mid.individual.net>,
Phil Allison <phil_a(a)tpg.com.au> wrote:

> "JW"

> > Can anyone recommend a good isolation transformer for sale on-line?

> ** What kind ??

> There are two:

> 1. Galvanic isolation - for use on a service bench.

> 2. Neutral conductor isolation.

> Most you see offered for sale in the USA are of the *second* kind.



> .... Phil

Surely an isolation transformer is just that - a one to one device with DC
isolation between windings. How it is subsequently configured is a
different matter. One use is where you can't be sure the line and neutral
of the supply are connected correctly - if they have a ground reference.

--
*To be intoxicated is to feel sophisticated, but not be able to say it.

Dave Plowman dave(a)davenoise.co.uk London SW
To e-mail, change noise into sound.
From: Wild_Bill on
Referring to one (1) of 'em

I think

Yep, they have 'em.

--
Cheers,
WB
..............


"Phil Allison" <phil_a(a)tpg.com.au> wrote in message
news:hutefl$6rd$1(a)news-01.bur.connect.com.au...
>
> "Chuck"
>
>
>> MCM Electronics has one.
>
>
> ** One what ??
>
>
>
>
> .... Phil
>

From: Cydrome Leader on
Jon Danniken <jonSPAMMENOTdanniken(a)yahspamhoo.com> wrote:
> JW wrote:
>> Can anyone recommend a good isolation transformer for sale on-line?
>> Need one that will handle 5 amps or so at 120VAC, and have a standard
>> AC plug at the outlet. Prefer one for less than $100 or so, unless
>> that seems unreasonable. Found one at Mouser for $114 but that's only
>> good for 1.25A. Getting lots of irrelevant hits on google...
>>
>> Thanks.
>
> You could always salvage a couple of microwave oven transformers and connect
> them back to back. Make sure and disconnect the secondaries from the cores
> though, of course.
>
> Jon
>
>

I've been tempted to try that just to see how awful the regulation is and
what sort of waveform would even come out before the things burned up.