Prev: Hung task - sync - 2.6.33-rc7 w/md6 multicore rebuild in process
Next: sched: fix SMT scheduler regression in find_busiest_queue()
From: Ed Tomlinson on 13 Feb 2010 12:20
Hi,

Inorder to get skype working with linux I have the following in .asoundrc for my normal userid.

---
pcm.pulse {
type pulse
}

ctl.pulse {
type pulse
}

pcm.!default {
type pulse
}
ctl.!default {
type pulse
---

Try #1
Starting as root if I do:
su - <id>
aplay sound.wav
<traceback inlined below>
aplay sound.wav
(silence)
killall pulseaudio
aplay sound.wav
(works as expected now going thru pulseaudio)

Try #2
Starting as root if I do:
aplay sound.wav
(works as expected using alsa alone)
su - <id>
aplay sound.wav
<another lockdep traceback>
aplay sound.wav
(works as expected now going thru pulseaudio)

With .32 there were no tracebacks (lockdep was enabled) and try #1 would work where I now get silence.

Ideas?
Ed Tomlinson

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC1200 Digital [ALC1200 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0

"ALC1200 Analog" is what has speakers connected

The em28xx in the traceback is an input source from a usb hdtv dongle.

pavucontrol setup has been verified.

[ 91.070620]
[ 91.070621] =======================================================
[ 91.071378] [ INFO: possible circular locking dependency detected ]
[ 91.071378] 2.6.33-rc8-crc #106
[ 91.071378] -------------------------------------------------------
[ 91.071378] pulseaudio/2717 is trying to acquire lock:
[ 91.071378] (&dev->lock){+.+.+.}, at: [<ffffffffa02797f1>] snd_em28xx_capture_open+0x61/0x190 [em28xx_alsa]
[ 91.071378]
[ 91.071378] but task is already holding lock:
[ 91.071378] (&pcm->open_mutex){+.+.+.}, at: [<ffffffffa010ecd2>] snd_pcm_open+0x182/0x450 [snd_pcm]
[ 91.071378]
[ 91.071378] which lock already depends on the new lock.
[ 91.071378]
[ 91.071378]
[ 91.071378] the existing dependency chain (in reverse order) is:
[ 91.071378]
[ 91.071378] -> #3 (&pcm->open_mutex){+.+.+.}:
[ 91.071378] [<ffffffff81083215>] __lock_acquire+0xfc5/0x1550
[ 91.071378] [<ffffffff8108383c>] lock_acquire+0x9c/0x140
[ 91.071378] [<ffffffff814b96c1>] __mutex_lock_common+0x61/0x610
[ 91.071378] [<ffffffff814b9d53>] mutex_lock_nested+0x43/0x50
[ 91.071378] [<ffffffffa010ad32>] snd_pcm_release+0x42/0xb0 [snd_pcm]
[ 91.071378] [<ffffffff8112115d>] __fput+0x15d/0x290
[ 91.071378] [<ffffffff811212ad>] fput+0x1d/0x30
[ 91.071378] [<ffffffff810fe001>] remove_vma+0x51/0x80
[ 91.071378] [<ffffffff810ffa1d>] do_munmap+0x2fd/0x390
[ 91.071378] [<ffffffff810ffb06>] sys_munmap+0x56/0x80
[ 91.071378] [<ffffffff81002adb>] system_call_fastpath+0x16/0x1b
[ 91.071378]
[ 91.071378] -> #2 (&mm->mmap_sem){++++++}:
[ 91.071378] [<ffffffff81083215>] __lock_acquire+0xfc5/0x1550
[ 91.071378] [<ffffffff8108383c>] lock_acquire+0x9c/0x140
[ 91.071378] [<ffffffff810f62c7>] might_fault+0xa7/0xd0
[ 91.071378] [<ffffffff8113102b>] filldir+0x7b/0xe0
[ 91.071378] [<ffffffff8118aa21>] sysfs_readdir+0xf1/0x1b0
[ 91.071378] [<ffffffff81131268>] vfs_readdir+0xb8/0xe0
[ 91.071378] [<ffffffff8113144d>] sys_getdents+0xad/0x110
[ 91.071378] [<ffffffff81002adb>] system_call_fastpath+0x16/0x1b
[ 91.071378]
[ 91.071378] -> #1 (sysfs_mutex){+.+.+.}:
[ 91.071378] [<ffffffff81083215>] __lock_acquire+0xfc5/0x1550
[ 91.071378] [<ffffffff8108383c>] lock_acquire+0x9c/0x140
[ 91.071378] [<ffffffff814b96c1>] __mutex_lock_common+0x61/0x610
[ 91.071378] [<ffffffff814b9d53>] mutex_lock_nested+0x43/0x50
[ 91.071378] [<ffffffff8118b082>] sysfs_addrm_start+0x22/0x30
[ 91.071378] [<ffffffff8118bc58>] create_dir+0x58/0xb0
[ 91.514885] [<ffffffff8118bd0a>] sysfs_create_dir+0x5a/0x70
[ 91.514885] [<ffffffff8123ebbd>] kobject_add_internal+0xbd/0x1f0
[ 91.514885] [<ffffffff8123ee08>] kobject_add_varg+0x38/0x60
[ 91.514885] [<ffffffff8123eee4>] kobject_add+0x44/0x70
[ 91.514885] [<ffffffff81392510>] device_add+0xb0/0x5e0
[ 91.514885] [<ffffffff81392a5e>] device_register+0x1e/0x30
[ 91.514885] [<ffffffff8140a50d>] i2c_register_adapter+0x12d/0x250
[ 91.514885] [<ffffffff8140a7f1>] i2c_add_adapter+0xb1/0xd0
[ 91.514885] [<ffffffffa0231ba4>] em28xx_i2c_register+0x104/0x520 [em28xx]
[ 91.514885] [<ffffffffa0233daa>] em28xx_usb_probe+0x68a/0xb90 [em28xx]
[ 91.514885] [<ffffffff813eb4ab>] usb_probe_interface+0xeb/0x1b0
[ 91.514885] [<ffffffff81395546>] driver_probe_device+0xc6/0x1d0
[ 91.514885] [<ffffffff813956eb>] __driver_attach+0x9b/0xa0
[ 91.514885] [<ffffffff8139492c>] bus_for_each_dev+0x6c/0xa0
[ 91.514885] [<ffffffff8139535e>] driver_attach+0x1e/0x20
[ 91.514885] [<ffffffff81394c11>] bus_add_driver+0xe1/0x280
[ 91.514885] [<ffffffff81395a58>] driver_register+0x98/0x140
[ 91.514885] [<ffffffff813ea06c>] usb_register_driver+0xdc/0x1a0
[ 91.514885] [<ffffffffa0248023>] 0xffffffffa0248023
[ 91.514885] [<ffffffff810001dc>] do_one_initcall+0x3c/0x1d0
[ 91.514885] [<ffffffff81092d75>] sys_init_module+0xe5/0x250
[ 91.514885] [<ffffffff81002adb>] system_call_fastpath+0x16/0x1b
[ 91.514885]
[ 91.514885] -> #0 (&dev->lock){+.+.+.}:
[ 91.514885] [<ffffffff81083668>] __lock_acquire+0x1418/0x1550
[ 91.514885] [<ffffffff8108383c>] lock_acquire+0x9c/0x140
[ 91.514885] [<ffffffff814b96c1>] __mutex_lock_common+0x61/0x610
[ 91.514885] [<ffffffff814b9d53>] mutex_lock_nested+0x43/0x50
[ 91.514885] [<ffffffffa02797f1>] snd_em28xx_capture_open+0x61/0x190 [em28xx_alsa]
[ 91.514885] [<ffffffffa010adee>] snd_pcm_open_substream+0x4e/0x90 [snd_pcm]
[ 91.514885] [<ffffffffa010ece9>] snd_pcm_open+0x199/0x450 [snd_pcm]
[ 91.514885] [<ffffffffa010efd4>] snd_pcm_capture_open+0x34/0x40 [snd_pcm]
[ 91.514885] [<ffffffffa00c5778>] snd_open+0x198/0x4e0 [snd]
[ 91.514885] [<ffffffff8112384d>] chrdev_open+0x17d/0x320
[ 91.514885] [<ffffffff8111d358>] __dentry_open+0x1a8/0x400
[ 91.514885] [<ffffffff8111d6b4>] nameidata_to_filp+0x54/0x70
[ 91.514885] [<ffffffff8112e7f1>] do_filp_open+0x841/0xc00
[ 91.514885] [<ffffffff8111e954>] do_sys_open+0xa4/0x180
[ 91.514885] [<ffffffff8111ea70>] sys_open+0x20/0x30
[ 91.514885] [<ffffffff81002adb>] system_call_fastpath+0x16/0x1b
[ 91.514885]
[ 91.514885] other info that might help us debug this:
[ 91.514885]
[ 91.514885] 1 lock held by pulseaudio/2717:
[ 91.514885] #0: (&pcm->open_mutex){+.+.+.}, at: [<ffffffffa010ecd2>] snd_pcm_open+0x182/0x450 [snd_pcm]
[ 91.514885]
[ 91.514885] stack backtrace:
[ 91.514885] Pid: 2717, comm: pulseaudio Not tainted 2.6.33-rc8-crc #106
[ 91.514885] Call Trace:
[ 91.514885] [<ffffffff81080fd9>] print_circular_bug+0xe9/0xf0
[ 91.514885] [<ffffffff81083668>] __lock_acquire+0x1418/0x1550
[ 91.514885] [<ffffffff81081dc8>] ? debug_check_no_locks_freed+0xc8/0x150
[ 91.514885] [<ffffffff8108383c>] lock_acquire+0x9c/0x140
[ 91.514885] [<ffffffffa02797f1>] ? snd_em28xx_capture_open+0x61/0x190 [em28xx_alsa]
[ 91.514885] [<ffffffff814b96c1>] __mutex_lock_common+0x61/0x610
[ 91.514885] [<ffffffffa02797f1>] ? snd_em28xx_capture_open+0x61/0x190 [em28xx_alsa]
[ 91.514885] [<ffffffffa02797f1>] ? snd_em28xx_capture_open+0x61/0x190 [em28xx_alsa]
[ 91.514885] [<ffffffffa0109c70>] ? snd_pcm_hw_rule_muldivk+0x0/0xa0 [snd_pcm]
[ 91.514885] [<ffffffff8107fd54>] ? lockdep_init_map+0x44/0x130
[ 91.514885] [<ffffffff814b9d53>] mutex_lock_nested+0x43/0x50
[ 91.514885] [<ffffffffa02797f1>] snd_em28xx_capture_open+0x61/0x190 [em28xx_alsa]
[ 91.514885] [<ffffffffa010adee>] snd_pcm_open_substream+0x4e/0x90 [snd_pcm]
[ 91.514885] [<ffffffffa010ece9>] snd_pcm_open+0x199/0x450 [snd_pcm]
[ 91.514885] [<ffffffff81081cfd>] ? trace_hardirqs_on+0xd/0x10
[ 91.514885] [<ffffffff810434f0>] ? default_wake_function+0x0/0x20
[ 91.514885] [<ffffffff814b965e>] ? mutex_unlock+0xe/0x10
[ 91.514885] [<ffffffffa010efd4>] snd_pcm_capture_open+0x34/0x40 [snd_pcm]
[ 91.514885] [<ffffffffa00c5778>] snd_open+0x198/0x4e0 [snd]
[ 91.514885] [<ffffffff8112384d>] chrdev_open+0x17d/0x320
[ 91.514885] [<ffffffff8111d358>] __dentry_open+0x1a8/0x400
[ 91.514885] [<ffffffff811236d0>] ? chrdev_open+0x0/0x320
[ 91.514885] [<ffffffff8111d6b4>] nameidata_to_filp+0x54/0x70
[ 91.514885] [<ffffffff8112e7f1>] do_filp_open+0x841/0xc00
[ 91.514885] [<ffffffff814bf981>] ? sub_preempt_count+0x51/0x60
[ 91.514885] [<ffffffff814bbb7c>] ? _raw_spin_unlock+0x5c/0x70
[ 91.514885] [<ffffffff8111e954>] do_sys_open+0xa4/0x180
[ 91.514885] [<ffffffff8111ea70>] sys_open+0x20/0x30
[ 91.514885] [<ffffffff81002adb>] system_call_fastpath+0x16/0x1b
[ 92.643423] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.





--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: Hung task - sync - 2.6.33-rc7 w/md6 multicore rebuild in process
Next: sched: fix SMT scheduler regression in find_busiest_queue()