From: Phil Allison on

"Joey.G"

> > Is the AM radio receiver ICMK484(aka AN414) still in production?

Where as the MK484 requires only s tuned circuit to select the
frequency.

I'm trying work out a way to use a MK484 on a set frequency with
minimal drift across operating temp.


** Since the MK484 has no local oscillator or IF amplifier, it does not
suffer from drift.

A ferrite rod antenna typically has a low enough Q factor to not need
retuning with temperature changes of the ordinary kind.

The chip only works across the AM band, plus a bit each end, you know.

Sounds to me like you are doing something quite daft with it.



..... Phil


From: Joe G (Home) on

"Phil Allison" <phil_a(a)tpg.com.au> wrote in message
news:7p5eugF17lU1(a)mid.individual.net...
>
> "Joey.G"
>
>> > Is the AM radio receiver ICMK484(aka AN414) still in production?
>
> Where as the MK484 requires only s tuned circuit to select the
> frequency.
>
> I'm trying work out a way to use a MK484 on a set frequency with
> minimal drift across operating temp.
>
>
> ** Since the MK484 has no local oscillator or IF amplifier, it does not
> suffer from drift.
>
> A ferrite rod antenna typically has a low enough Q factor to not need
> retuning with temperature changes of the ordinary kind.
>
> The chip only works across the AM band, plus a bit each end, you know.
>
> Sounds to me like you are doing something quite daft with it.
>
>
>
> .... Phil
>

Thanks for your comments on the drift of the ant coil that is incrraging.

I've been checking out data on 0805 npo 1% cap's they seem quite stable
also.


One mans daft idea is another mans brilliant idea.

Joe


From: Leon on
On 18 Dec, 14:52, "Joe G \(Home\)" <jo...(a)optusnet.com.au> wrote:
> Hi All,
>
> Is the AM radio receiver IC MK484 (aka AN414) still in production?
>
> Are there any other alternatives?
>
> Regs
> Joey

Just design a simple TRF receiver with a couple of transistors.

Leon