Prev: ASUS drivers download
Next: Bios for Asus Ptgd1-la, any help appreciated
From: ArtLab on 20 Sep 2006 08:40
I have a K8V SE Deluxe MOBO with built in Marvell Yukon Gigabit Ethernet
10/100/1000Base-T Adapter, Copper RJ-45. Operating system is WindowsXP.
Since I built this system, about a year ago, I have been operating this
Ethernet Adapter successfully using Driver version 6.30 which dates back to
10/2/03. In an effort to update, I have downloaded from Marvell their latest
driver update (file yk51x86.zip) which contains v8.57.2.3. Upon trying to
install this update (I have tried all possible install methods) I always end
up getting an error message from the Wizard: "....An error occurred during
the Installation of this device. The system cannot find the file
specificed...." Yes, I have made sure that all required files have been
unzipped to a folder in my hard drive and have tried "forcing" the wizard to
fetch the files at the proper location... all to no avail.

Any suggestions or advise would be most appreciated.



From: BigJim on 20 Sep 2006 11:11
go into device manager and do an update the drive, when asked point to the
folder where the unzipped files are.
"ArtLab" <artlab(a)bellsouth.net> wrote in message
news:NEaQg.19491$eW5.6133(a)bignews5.bellsouth.net...
>I have a K8V SE Deluxe MOBO with built in Marvell Yukon Gigabit Ethernet
>10/100/1000Base-T Adapter, Copper RJ-45. Operating system is WindowsXP.
>Since I built this system, about a year ago, I have been operating this
>Ethernet Adapter successfully using Driver version 6.30 which dates back to
>10/2/03. In an effort to update, I have downloaded from Marvell their
>latest driver update (file yk51x86.zip) which contains v8.57.2.3. Upon
>trying to install this update (I have tried all possible install methods) I
>always end up getting an error message from the Wizard: "....An error
>occurred during the Installation of this device. The system cannot find the
>file specificed...." Yes, I have made sure that all required files have
>been unzipped to a folder in my hard drive and have tried "forcing" the
>wizard to fetch the files at the proper location... all to no avail.
>
> Any suggestions or advise would be most appreciated.
>
>
>


From: Bill on 20 Sep 2006 17:37
In article <NEaQg.19491$eW5.6133(a)bignews5.bellsouth.net>,
artlab(a)bellsouth.net says...
> I have a K8V SE Deluxe MOBO with built in Marvell Yukon Gigabit Ethernet
> 10/100/1000Base-T Adapter, Copper RJ-45. Operating system is WindowsXP.
> Since I built this system, about a year ago, I have been operating this
> Ethernet Adapter successfully using Driver version 6.30 which dates back to
> 10/2/03. In an effort to update, I have downloaded from Marvell their latest
> driver update (file yk51x86.zip) which contains v8.57.2.3. Upon trying to
> install this update (I have tried all possible install methods) I always end
> up getting an error message from the Wizard: "....An error occurred during
> the Installation of this device. The system cannot find the file
> specificed...." Yes, I have made sure that all required files have been
> unzipped to a folder in my hard drive and have tried "forcing" the wizard to
> fetch the files at the proper location... all to no avail.
>
> Any suggestions or advise would be most appreciated.
>
>

What advantages does the new driver confer to you that the old working
driver doesn't have?

Bill
--
Gmail and Google Groups. This century's answer to AOL and WebTV.
From: Gary on 21 Sep 2006 06:21

On 20-Sep-2006, "ArtLab" <artlab(a)bellsouth.net> wrote:

> I have a K8V SE Deluxe MOBO with built in Marvell Yukon Gigabit Ethernet
> 10/100/1000Base-T Adapter, Copper RJ-45. Operating system is WindowsXP.
> Since I built this system, about a year ago, I have been operating this
> Ethernet Adapter successfully using Driver version 6.30 which dates back
> to
> 10/2/03. In an effort to update, I have downloaded from Marvell their
> latest
> driver update (file yk51x86.zip) which contains v8.57.2.3. Upon trying to
> install this update (I have tried all possible install methods) I always
> end
> up getting an error message from the Wizard: "....An error occurred during
>
> the Installation of this device. The system cannot find the file
> specificed...." Yes, I have made sure that all required files have been
> unzipped to a folder in my hard drive and have tried "forcing" the wizard
> to
> fetch the files at the proper location... all to no avail.
>
> Any suggestions or advise would be most appreciated.



http://www.marvell.com/products/pcconn/yukon/index.jsp
 | 
Pages: 1
Prev: ASUS drivers download
Next: Bios for Asus Ptgd1-la, any help appreciated