Prev: Question about Sarkovskii Ordering
Next: need sol manual for rizonni 5th edition
From: serkanbirinci on 24 Dec 2007 06:08
Could you send me the rapidshare link of that book to
serkanbirinci1(a)yahoo.com ...thanks

oneus...(a)gmail.com wrote:
> the above post may be a bluff, but here's the real thing:
>
> Mechanics of Materials: A Modern Integration of Mechanics and
> Materials in Structural Design (Hardcover)
> by Christopher Jenkins (Author), Sanjeev Khanna (Author)
>
> Hardcover: 408 pages
> Publisher: Academic Press; 1 edition (March 15, 2005)
> Language: English
> ISBN-10: 0123838525
> ISBN-13: 978-0123838520
>
> Rapidshare link (djvu format, 7289 KB):
> http://rapidshare.com/files/77559563/jenkinsMechanicsOfMaterials.djvu.html
>
> enjoy
>
> On Dec 13, 9:22 pm, BERGH <mattos...(a)gmail.com> wrote:
> > My List of Solutions Manual
> > ____________________________
> >
> > contact me to : newbergh123yahoo.com
> > newbergh123(at)yahoo.com
> >
> > ot to : mattos...(a)gmail.com
> > mattosbw1(at)gmail.com
> >
> > .... try with both emails .
> >
> > If your wanted solutions manual ins't on this list, also can ask me if
> > is available . These are some only.
> >
> > This same list of titles (not links) is available from :
> >
> > http://rapidshare.com/files/72086564/List_of_solutions_manual.txt
> >
> > ________________________
> >
> > - Mechanics, Mechanical Engineering & Aerospace Engineering:
> > ____________________________________________________________
> >
> > Classical mechanics (2nd Ed., Goldstein)
> > Classical Mechanics (Douglas Gregory) + original Ebook
> > Advanced Dynamics (Greenwood) + original Ebook
> > Advanced Engineering Dynamics (2nd Ed., Jerry Ginsberg) + Ebook
> > Classical Dynamics (Jorge V. Jos�) + Ebook
> > Impact Mechanics (W.J. Stronge)
> > Introduction to Mechanical Engineering (Rizza)
> > Mechanical Engineering Principles (Bird & Ross) + original Ebook
> > Dynamics of Mechanical Systems (C.T.F. Ross)
> > Mechanics of Solids (C.T.F. Ross)
> > Engineering Design (Rudolph J. Eggert)
> > Engineering Design: A Project-Based Introduction (2nd Ed., Clive L.
> > Dym & Patrick Little)
> > Tools and Tactics of Design (Dominick, Demel, Lawbaugh, Freuler,
> > Kinzel & Fromm)
> > Engineering Analysis in Applied Mechanics (John W Brewer)
> > Engineering Fluid Mechanics (William Graebel)
> > Advanced Fluid Mechanics (William Graebel) + original Ebook
> > Computational Fluid Dynamics: A Practical Approach (Jiyuan Tu, Guan
> > Heng Yeoh & Chaoqun Liu)
> > Mechanics of Fluids (8th Ed., Massey) + original Ebook
> > Fluid Mechanics (5th Ed., White) + Ebook
> > Fluid Mechanics (6th Ed., White)
> > Viscous Fluid Flow (3rd Ed., White)
> > Introduction to the Thermodynamics of Materials (4th Ed. David
> > Gaskell)
> > Engineering Thermodynamics: Work and Heat Transfer (4th Ed., G.F.C.
> > Rogers & Yon Mayhew)
> > Introduction to Thermodynamics and Heat Transfer (2nd Ed., Cengel)
> > Fundamentals of Thermal-Fluid Sciences (1st Ed., Cengel) + original
> > Ebook
> > Fundamentals of Thermal-Fluid Sciences (2nd Ed., Cengel) + original
> > Ebook
> > Fundamentals of Thermal-Fluid Sciences with Student Resource CD (3rd
> > Ed., Cengel & Turner)
> > Thermodynamics: An Engineering Approach (5th Ed., Cengel) + original
> > Ebook
> > Thermodynamics: An Engineering Approach (6th Ed., Cengel) + original
> > Ebook
> > Essentials of Fluid Mechanics: Fundamentals and Applications (1st Ed.,
> > Cengel) + original ebook
> > Fluid Mechanics (1st Ed., Cengel) + original Ebook
> > Heat Tranfer (2nd Ed., Cengel) + original Ebook
> > Heat and Mass Transfer: A Practical Approach (3rd. Ed., Cengel) +
> > original Ebook
> > Introduction to Fluid Mechanics (6th Ed., Robert Fox, Alan McDonald &
> > Philip Pritchard)
> > Fluid Mechanics (5th Ed., Douglas)
> > Fluid Mechanics (3rd Ed., Kundu & Cohen)
> > Fluid Mechanics (4th Ed., Kundu & Cohen)
> > Fluid Mechanics with Engineering Applications (Finnemore)
> > Fundamentals of Fluid Mechanics, 4th Ed (Bruce R. Munson, Donald F.
> > Young, Theodore H. Okiishi) + original ebook
> > Fundamentals of Fluid Mechanics, 5th Ed (Bruce R. Munson, Donald F.
> > Young, Theodore H. Okiishi)
> > A Brief Introduction to Fluid Mechanics, 3rd Ed (Donald F. Young,
> > Bruce R. Munson, Theodore H. Okiishi)
> > A Brief Introduction to Fluid Mechanics, 4th Ed (Donald F. Young,
> > Bruce R. Munson, Theodore H. Okiishi, Wade W.)
> > Engineering Fluid Mechanics, 7th Ed (Clayton T. Crowe, Donald F.
> > Elger, John A. Roberson)
> > Engineering Fluid Mechanics, 8th Ed (Clayton T. Crowe, Donald F.
> > Elger, John A. Roberson)
> > Fluid Mechanics (Potter & Foss)
> > Mechanics of Fluids (3rd Ed., Potter)
> > Mechanics of Fluids (4th Ed., Shames)
> > Extended Irreversible Thermodynamics (3rd Ed., D. Jou, J. Casas-
> > Vazquez & G. Lebon)
> > Thermodynamics: An Integrated Learning System (Schmidt, Ezekoye,
> > Howell & Baker)
> > Introduction to Thermal and Fluids Engineering (Kaminski & Jensen)
> > Heating, Ventilating and Air Conditioning Analysis and Design (6th
> > Ed., McQuiston)
> > Electricity, Electronics, and Control Systems for HVAC (4th Ed.,
> > Thomas Kissell)
> > Convective Heat and Mass Transfer (4th Ed., Kays & Crawford)
> > Advanced Engineering Thermodynamics (3rd Ed., Bejan)
> > Convection Heat Transfer (3rd Ed., Bejan)
> > Thermal Design and Optimization (Bejan)
> > Shape and Structure, from Engineering to Nature (Bejan)
> > Thermodynamics: Concepts and Applications (Stephen Turns)
> > Thermal-Fluid Sciences: An Integrated Approach (Stephen Turns)
> > Principles of Heat Transfer (Kaviany)
> > Heat Convection (Latif M. Jiji) + original Ebook
> > Fundamentals of Momentum, Heat and Mass Transfer (5th Ed., Welty)
> > Analytical Methods for Heat Transfer and Fluid Flow Problems (Bernhard
> > Weigand)
> > Two-Phase Flow: Theory and Applications (Clement Kleinstreuer)
> > Heat Tranfer (Rao)
> > Convective Heat Transfer (kakac)
> > Fundamentals of Thermodynamics (5th Ed., Richard E. Sonntag, Claus
> > Borgnakke & Gordon J. Van Wylen)
> > Fundamentals of Thermodynamics (6th Ed., Richard E. Sonntag, Claus
> > Borgnakke & Gordon J. Van Wylen)
> > Introduction to Engineering Thermodynamics (1st Ed., Richard E.
> > Sonntag & Claus Borgnakke)
> > Introduction to Engineering Thermodynamics (2nd Ed., Richard E.
> > Sonntag & Claus Borgnakke)
> > Fundamentals of Engineering Thermodynamics, 5th Ed (Michael J. Moran,
> > Howard N. Shapiro) + original Ebook
> > Fundamentals of Engineering Thermodynamics, 6th Ed (Michael J. Moran,
> > Howard N. Shapiro)
> > Fundamentals of Heat and Mass Transfer (5th Ed., Incropera, DeWitt)
> > Fundamentals of Heat and Mass Transfer (6th Ed., Incropera, DeWitt)
> > Introduction to Heat Transfer (4th Ed., Incropera, DeWitt)
> > Introduction to Heat Transfer (5th Ed., Incropera, DeWitt)
> > Radiation Detection and Measurement (3rd Ed., Glenn Knoll)
> > Radiative Heat Transfer (2nd Ed., Michael Modest)
> > Computational Heat Transfer (2nd Ed., Jaluria)
> > Principles of Combustion (2nd Ed., Kenneth Kuan-yun Kuo)
> > Combustion (3rd Ed., Irvin Glassman)
> > Incompressible Flow (3rd Ed., Panton)
> > Modern Compressible Flow: With Historical Perspective (3rd Ed., John
> > D. Anderson)
> > Non-Newtonian Flow : Fundamentals and Engineering Applications (R P
> > Chhabra & J F Richardson) + original Ebook
> > Computational Techniques for Fluid Dynamics (Srinivas, K., Fletcher,
> > C.A.J.)
> > Introduction to Computational Fluid Dynamics (A.W. Date) + original
> > Ebook
> > Theory of Applied Robotics: Kinematics, Dynamics and Control (Reza N.
> > Jazar)
> > Kinematic Chains and Machine Components Design (Dan B. Marghitu) +
> > original Ebook
> > Kinematics, Dynamics, and Design of Machinery (2nd Ed., Waldron &
> > Kinzel)
> > Machines and Mechanisms: Applied Kinematic Analysis (3rd Ed.,
> > Myszka)
> > Mechanical Design: A Components Approach (Peter Childs)
> > Mechanical Design of Machine Elements and Machines: A Failure
> > Prevention Perspective (Collins)
> > Fundamentals of Machine Component Design (3rd Ed., Juvinall)
> > Fundamentals of Machine Component Design (4th Ed., Juvinall)
> > Design of Machine Elements (8th Ed., Spotts)
> > Solutions Manual to the text : "Problems on the Design of Machine
> > Elements" (Faires)
> > Machine Elements in Mechanical Design (4th Ed., Mott)
> > Mechanical Design: An Integrated Approach (1st Ed., Ugural)
> > Design of Machinery (3rd Ed., Norton)
> > Design of Machinery (4th Ed., Norton)
> > Machine Design (2nd Ed., Norton)
> > Machine Design : An Integrated Approach (3rd Ed., Norton)
> > Mechanical Engineering Design (6th Ed., Shigley)
> > Mechanical Engineering Design (7th Ed., Shigley)
> > Shigley's Mechanical Engineering Design (8th Ed., Budynas)
> > Fundamentals of Machine Elements (1st Ed., Hamrock)
> > Fundamentals of Machine Elements (2nd Ed., Hamrock)
> > Mechanics of Materials: A Modern Integration of Mechanics and
> > Materials in Structural Design (Christopher Jenkins & Sanjeev Khanna)
> > Mechanics of Materials (3th Ed., Beer)
> > Mechanics of Materials (5th Ed., Gere)
> > Mechanics of Materials (6th Ed., Gere)
> > Mechanics of Materials (Ugural)
> > Mechanics of Materials (2nd Ed., Roy R. Craig)
> > Simplified Mechanics and Strength of Materials (6th Ed., James
> > Ambrose)
> > Engineering Mechanics - Statics, 5th Ed (J. L. Meriam, L. G. Kraige) +
> > Ebook
> > Engineering Mechanics - Statics, 6th Ed (J. L. Meriam, L. G. Kraige)
> > Engineering Mechanics - Dynamics, 5th Ed (J. L. Meriam, L. G. Kraige)
> > Engineering Mechanics - Dynamics, 6th Ed (J. L. Meriam, L. G. Kraige)
> > Vector Mechanics for Engineers: Statics (7th Ed., Ferdinand P. Beer)
> > Vector Mechanics for Engineers: Statics (8th Ed., Ferdinand P. Beer)
> > Vector Mechanics for Engineers: Dynamics (7th Ed., Ferdinand P. Beer)
> > Vector Mechanics for Engineers: Dynamics (8th Ed., Ferdinand P. Beer)
> > Statics: Analysis and Design of Systems in Equilibrium (Sheppard &
> > Tongue)
> > Dynamics: Analysis and Design of Systems in Motion (Sheppard & Tongue)
> > Statics and Mechanics of Materials: An Integrated Approach (2nd Ed.,
> > Riley, Sturges & Morris)
> > Mechanics of Materials (6th Ed., Riley, Sturges & Morris)
> > Deformable Bodies and Their Material Behavior (Haslach & Armstrong)
> > Intermediate Mechanics of Materials, (1st Ed., Barber)
> > Elasticity (2nd Ed., J.R. Barber) + original Ebook
> > Elasticity: Theory, Applications, and Numerics (Martin Sadd) +
> > original Ebook
> > Elasticity in Engineering Mechanics (2nd Ed., Boresi)
> > Advanced Mechanics of Materials (6th Ed., Boresi) + Ebook
> > Metal Fatigue in Engineering (2nd Ed., Stephens, Fatemi & Fuchs)
> > Applied Mechanics for Engineering Technology (8th Ed., Keith M.
> > Walker)
> > Applied Fluid Mechanics (6th Ed., Mott)
> > Applied Strength of Materials (4th Ed., Mott)
> > Applied Strength of Materials (5th Ed., Mott)
> > Intermediate Dynamics for Engineers (Marcelo R.M & Crespo da Silva)
> > Engineering Mechanics - Statics (4th Ed., Anthony Bedford & Wallace
> > Fowler)
> > Engineering Mechanics - Statics (5th Ed., Anthony Bedford & Wallace
> > Fowler)
> > Engineering Mechanics - Dynamics (4th Ed., Anthony Bedford & Wallace
> > Fowler)
> > Engineering Mechanics - Dynamics (5th Ed., Anthony Bedford & Wallace
> > Fowler)
> > Elastic And Inelastic Stress Analysis (Shames)
> > Strength of Materials - A New Unified Theory for the 21st Century
> > (Surya Patnaik & Dale Hopkins) + original ebook
> > Statics and Strengths of Materials (6th Ed., Morrow & Kokernak)
> > Engineering Mechanics : Statics (11th Ed., Hibbeler)-Not mathcad files
> > converted to pdf,
> >
> > read more >>...
From: galu on 8 Jan 2008 18:36
please send me this solution

Mechanical Engineering Design (7th Ed., Shigley)
 | 
Pages: 1
Prev: Question about Sarkovskii Ordering
Next: need sol manual for rizonni 5th edition