NT 4 setup
in [Virtual PC]
|
Next: DOS 6.22
From: JoesCat on 10 Mar 2005 16:27 Virtual PC 2004, trying to setup an NT Server. Using either a known good CD, and its ISO image, from a CD and copied to hard disk, setup starts, then after a few seconds into the setup process, "An unrecoverable processor error has been encountered. The virtual machine will reset now." Of course, I chose NT Server as the virtual machine type, and raised the RAM to 256MB. Also tried NT Workstation, in a new VPC, default settings, same error. This is running on a P4 machine, with 2GB of RAM. It installs and runs Server 2003 and WinXP fine. Any ideas? I'm very new to Virtual PC, and I've never setup an NT on it before. Here's the virtual PC's screen: *** STOP: 0x0000003E (0x00000080,0x00000000,0x00000000,0x00000000) p5-0000 irql:1f SYSVER 0xf0000565 Dll Base DateStmp - Name Dll Base DateStmp - Name 80100000 3202c097 - ntoskrnl.exe 80001000 31ee6c52 - hal.dll 801fb000 31f51355 - setupdd.sys 80062000 31ec792d - SPDDLANG.SYS 8022f000 31f8ff94 - pcmcia.sys 80239000 31ec6c74 - SCSIPORT.SYS 80063000 31ed06b4 - cpqarray.sys 80241000 31ed06b5 - delldsa.sys 80243000 31ed06b4 - atapi.sys 80248000 31ed06b9 - ncr53c9x.sys 8024b000 31ed06ba - spock.sys 8024d000 31ed06b9 - oliscsi.sys 80251000 31ed06c2 - ncrc700.sys 80254000 31ed06c2 - ncrc710.sys 80257000 31f05449 - aha154x.sys 8025a000 31ed06be - sparrow.sys 8025f000 31ed06b2 - aha174x.sys 80261000 31ed06b5 - dptscsi.sys 80264000 31ed06bc - ultra14f.sys 80266000 31ed06bd - ultra24f.sys 80268000 31ed06b3 - ami0nt.sys 8026a000 31ed06be - fd7000ex.sys 8026c000 31ed06b7 - fd8xx.sys 8026f000 31ed06b6 - fd16_700.sys 80272000 31ed06bf - arrow.sys 8027b000 31ed22d4 - symc810.sys 80280000 31ed06b4 - buslogic.sys 80282000 31ed06c1 - slcd32.sys 80289000 31ed06bf - aic78xx.sys 80290000 31ed06b8 - dac960nt.sys 80293000 31ed06ba - ql10wnt.sys 8029a000 31ed06b3 - amsint.sys 8038a000 31ed06c0 - flashpnt.sys 80395000 31ed06c0 - cpqfws2e.sys 8039f000 31ec6c8f - atdisk.sys 803a6000 31ec6c76 - abiosdsk.sys 803a9000 31eedd07 - fastfat.sys 803ca000 31eed0a7 - ntfs.sys 80422000 31ec6c6d - vga.sys 80426000 31f50722 - VIDEOPRT.SYS 8042c000 31ec6c8d - floppy.sys 80431000 31ec6ca1 - cdrom.sys 80437000 31ec6c7a - CLASS2.SYS 8043b000 31ed237c - disk.sys 8043f000 31ec6ca5 - sfloppy.sys 80441000 31ec6c90 - i8042prt.sys 80447000 31ec6c94 - kbdclass.sys 8044a000 31ec6e8f - cdfs.sys
From: Robert Comer on 10 Mar 2005 16:38 Lower the RAM to 64M for the install and try that. You can raise it back after you do the install. Do you have VPC2004 SP1 installed? -- Bob Comer "JoesCat" <JoesCat(a)discussions.microsoft.com> wrote in message news:5619DBE3-F959-4F01-A62E-05AE0707D9A9(a)microsoft.com... > Virtual PC 2004, trying to setup an NT Server. > Using either a known good CD, and its ISO image, from a CD and copied to > hard disk, > setup starts, then after a few seconds into the setup process, > > "An unrecoverable processor error has been encountered. > > The virtual machine will reset now." > > Of course, I chose NT Server as the virtual machine type, and raised the > RAM to 256MB. > Also tried NT Workstation, in a new VPC, default settings, same error. > > This is running on a P4 machine, with 2GB of RAM. > It installs and runs Server 2003 and WinXP fine. > > Any ideas? I'm very new to Virtual PC, and I've never setup an NT on it > before. > > Here's the virtual PC's screen: > > *** STOP: 0x0000003E (0x00000080,0x00000000,0x00000000,0x00000000) > > > > > > p5-0000 irql:1f SYSVER 0xf0000565 > > > > Dll Base DateStmp - Name Dll Base DateStmp - Name > > 80100000 3202c097 - ntoskrnl.exe 80001000 31ee6c52 - hal.dll > > 801fb000 31f51355 - setupdd.sys 80062000 31ec792d - SPDDLANG.SYS > > 8022f000 31f8ff94 - pcmcia.sys 80239000 31ec6c74 - SCSIPORT.SYS > > 80063000 31ed06b4 - cpqarray.sys 80241000 31ed06b5 - delldsa.sys > > 80243000 31ed06b4 - atapi.sys 80248000 31ed06b9 - ncr53c9x.sys > > 8024b000 31ed06ba - spock.sys 8024d000 31ed06b9 - oliscsi.sys > > 80251000 31ed06c2 - ncrc700.sys 80254000 31ed06c2 - ncrc710.sys > > 80257000 31f05449 - aha154x.sys 8025a000 31ed06be - sparrow.sys > > 8025f000 31ed06b2 - aha174x.sys 80261000 31ed06b5 - dptscsi.sys > > 80264000 31ed06bc - ultra14f.sys 80266000 31ed06bd - ultra24f.sys > > 80268000 31ed06b3 - ami0nt.sys 8026a000 31ed06be - fd7000ex.sys > > 8026c000 31ed06b7 - fd8xx.sys 8026f000 31ed06b6 - fd16_700.sys > > 80272000 31ed06bf - arrow.sys 8027b000 31ed22d4 - symc810.sys > > 80280000 31ed06b4 - buslogic.sys 80282000 31ed06c1 - slcd32.sys > > 80289000 31ed06bf - aic78xx.sys 80290000 31ed06b8 - dac960nt.sys > > 80293000 31ed06ba - ql10wnt.sys 8029a000 31ed06b3 - amsint.sys > > 8038a000 31ed06c0 - flashpnt.sys 80395000 31ed06c0 - cpqfws2e.sys > > 8039f000 31ec6c8f - atdisk.sys 803a6000 31ec6c76 - abiosdsk.sys > > 803a9000 31eedd07 - fastfat.sys 803ca000 31eed0a7 - ntfs.sys > > 80422000 31ec6c6d - vga.sys 80426000 31f50722 - VIDEOPRT.SYS > > 8042c000 31ec6c8d - floppy.sys 80431000 31ec6ca1 - cdrom.sys > > 80437000 31ec6c7a - CLASS2.SYS 8043b000 31ed237c - disk.sys > > 8043f000 31ec6ca5 - sfloppy.sys 80441000 31ec6c90 - i8042prt.sys > > 80447000 31ec6c94 - kbdclass.sys 8044a000 31ec6e8f - cdfs.sys > > >
From: Colin Barnhorst on 10 Mar 2005 17:30 If you have a Prescott processor, be sure you have SP1. NT4 will not run without it. It is probably the memory, as Robert says. -- Colin Barnhorst [MVP Windows - Virtual Machine] (Reply to the group only unless otherwise requested) "JoesCat" <JoesCat(a)discussions.microsoft.com> wrote in message news:5619DBE3-F959-4F01-A62E-05AE0707D9A9(a)microsoft.com... > Virtual PC 2004, trying to setup an NT Server. > Using either a known good CD, and its ISO image, from a CD and copied to > hard disk, > setup starts, then after a few seconds into the setup process, > > "An unrecoverable processor error has been encountered. > > The virtual machine will reset now." > > Of course, I chose NT Server as the virtual machine type, and raised the > RAM to 256MB. > Also tried NT Workstation, in a new VPC, default settings, same error. > > This is running on a P4 machine, with 2GB of RAM. > It installs and runs Server 2003 and WinXP fine. > > Any ideas? I'm very new to Virtual PC, and I've never setup an NT on it > before. > > Here's the virtual PC's screen: > > *** STOP: 0x0000003E (0x00000080,0x00000000,0x00000000,0x00000000) > > > > > > p5-0000 irql:1f SYSVER 0xf0000565 > > > > Dll Base DateStmp - Name Dll Base DateStmp - Name > > 80100000 3202c097 - ntoskrnl.exe 80001000 31ee6c52 - hal.dll > > 801fb000 31f51355 - setupdd.sys 80062000 31ec792d - SPDDLANG.SYS > > 8022f000 31f8ff94 - pcmcia.sys 80239000 31ec6c74 - SCSIPORT.SYS > > 80063000 31ed06b4 - cpqarray.sys 80241000 31ed06b5 - delldsa.sys > > 80243000 31ed06b4 - atapi.sys 80248000 31ed06b9 - ncr53c9x.sys > > 8024b000 31ed06ba - spock.sys 8024d000 31ed06b9 - oliscsi.sys > > 80251000 31ed06c2 - ncrc700.sys 80254000 31ed06c2 - ncrc710.sys > > 80257000 31f05449 - aha154x.sys 8025a000 31ed06be - sparrow.sys > > 8025f000 31ed06b2 - aha174x.sys 80261000 31ed06b5 - dptscsi.sys > > 80264000 31ed06bc - ultra14f.sys 80266000 31ed06bd - ultra24f.sys > > 80268000 31ed06b3 - ami0nt.sys 8026a000 31ed06be - fd7000ex.sys > > 8026c000 31ed06b7 - fd8xx.sys 8026f000 31ed06b6 - fd16_700.sys > > 80272000 31ed06bf - arrow.sys 8027b000 31ed22d4 - symc810.sys > > 80280000 31ed06b4 - buslogic.sys 80282000 31ed06c1 - slcd32.sys > > 80289000 31ed06bf - aic78xx.sys 80290000 31ed06b8 - dac960nt.sys > > 80293000 31ed06ba - ql10wnt.sys 8029a000 31ed06b3 - amsint.sys > > 8038a000 31ed06c0 - flashpnt.sys 80395000 31ed06c0 - cpqfws2e.sys > > 8039f000 31ec6c8f - atdisk.sys 803a6000 31ec6c76 - abiosdsk.sys > > 803a9000 31eedd07 - fastfat.sys 803ca000 31eed0a7 - ntfs.sys > > 80422000 31ec6c6d - vga.sys 80426000 31f50722 - VIDEOPRT.SYS > > 8042c000 31ec6c8d - floppy.sys 80431000 31ec6ca1 - cdrom.sys > > 80437000 31ec6c7a - CLASS2.SYS 8043b000 31ed237c - disk.sys > > 8043f000 31ec6ca5 - sfloppy.sys 80441000 31ec6c90 - i8042prt.sys > > 80447000 31ec6c94 - kbdclass.sys 8044a000 31ec6e8f - cdfs.sys > > >
From: JoesCat on 10 Mar 2005 21:33 Ah, okay, I'll try SP1. I JUST received VPC 2004 about two weeks ago, included with TechNet Plus. Bummer then, if they shipped recently, but didn't include the service pack. Updates: I wasn't real clear, but tried to install NT Workstation, using default NT Workstation settings (64MB RAM included), same error. I have since tried it on an old computer here (a PII), and setup went fine using the same ISO image file. I was thinking I would transport that to my P4 machine at work, to see if I get past the setup process anyway. But, if there are issues with NT4 on a P4, then it seems more like obtaining and installing SP1 is the way to go. Thanks! "Colin Barnhorst" wrote: > If you have a Prescott processor, be sure you have SP1. NT4 will not run > without it. It is probably the memory, as Robert says. > > -- > Colin Barnhorst [MVP Windows - Virtual Machine] > (Reply to the group only unless otherwise requested) > "JoesCat" <JoesCat(a)discussions.microsoft.com> wrote in message > news:5619DBE3-F959-4F01-A62E-05AE0707D9A9(a)microsoft.com... > > Virtual PC 2004, trying to setup an NT Server. > > Using either a known good CD, and its ISO image, from a CD and copied to > > hard disk, > > setup starts, then after a few seconds into the setup process, > > > > "An unrecoverable processor error has been encountered. > > > > The virtual machine will reset now." > > > > Of course, I chose NT Server as the virtual machine type, and raised the > > RAM to 256MB. > > Also tried NT Workstation, in a new VPC, default settings, same error. > > > > This is running on a P4 machine, with 2GB of RAM. > > It installs and runs Server 2003 and WinXP fine. > > > > Any ideas? I'm very new to Virtual PC, and I've never setup an NT on it > > before. > > > > Here's the virtual PC's screen: > > > > *** STOP: 0x0000003E (0x00000080,0x00000000,0x00000000,0x00000000) > > > > > > > > > > > > p5-0000 irql:1f SYSVER 0xf0000565 > > > > > > > > Dll Base DateStmp - Name Dll Base DateStmp - Name > > > > 80100000 3202c097 - ntoskrnl.exe 80001000 31ee6c52 - hal.dll > > > > 801fb000 31f51355 - setupdd.sys 80062000 31ec792d - SPDDLANG.SYS > > > > 8022f000 31f8ff94 - pcmcia.sys 80239000 31ec6c74 - SCSIPORT.SYS > > > > 80063000 31ed06b4 - cpqarray.sys 80241000 31ed06b5 - delldsa.sys > > > > 80243000 31ed06b4 - atapi.sys 80248000 31ed06b9 - ncr53c9x.sys > > > > 8024b000 31ed06ba - spock.sys 8024d000 31ed06b9 - oliscsi.sys > > > > 80251000 31ed06c2 - ncrc700.sys 80254000 31ed06c2 - ncrc710.sys > > > > 80257000 31f05449 - aha154x.sys 8025a000 31ed06be - sparrow.sys > > > > 8025f000 31ed06b2 - aha174x.sys 80261000 31ed06b5 - dptscsi.sys > > > > 80264000 31ed06bc - ultra14f.sys 80266000 31ed06bd - ultra24f.sys > > > > 80268000 31ed06b3 - ami0nt.sys 8026a000 31ed06be - fd7000ex.sys > > > > 8026c000 31ed06b7 - fd8xx.sys 8026f000 31ed06b6 - fd16_700.sys > > > > 80272000 31ed06bf - arrow.sys 8027b000 31ed22d4 - symc810.sys > > > > 80280000 31ed06b4 - buslogic.sys 80282000 31ed06c1 - slcd32.sys > > > > 80289000 31ed06bf - aic78xx.sys 80290000 31ed06b8 - dac960nt.sys > > > > 80293000 31ed06ba - ql10wnt.sys 8029a000 31ed06b3 - amsint.sys > > > > 8038a000 31ed06c0 - flashpnt.sys 80395000 31ed06c0 - cpqfws2e.sys > > > > 8039f000 31ec6c8f - atdisk.sys 803a6000 31ec6c76 - abiosdsk.sys > > > > 803a9000 31eedd07 - fastfat.sys 803ca000 31eed0a7 - ntfs.sys > > > > 80422000 31ec6c6d - vga.sys 80426000 31f50722 - VIDEOPRT.SYS > > > > 8042c000 31ec6c8d - floppy.sys 80431000 31ec6ca1 - cdrom.sys > > > > 80437000 31ec6c7a - CLASS2.SYS 8043b000 31ed237c - disk.sys > > > > 8043f000 31ec6ca5 - sfloppy.sys 80441000 31ec6c90 - i8042prt.sys > > > > 80447000 31ec6c94 - kbdclass.sys 8044a000 31ec6e8f - cdfs.sys > > > > > > > > >
From: Colin Barnhorst on 10 Mar 2005 21:54
It is with the Prescott chips only. It is fixed in SP1. Install SP1 and see. -- Colin Barnhorst [MVP Windows - Virtual Machine] (Reply to the group only unless otherwise requested) "JoesCat" <JoesCat(a)discussions.microsoft.com> wrote in message news:21E8E2ED-87B3-462F-AC24-113DD3DBFC36(a)microsoft.com... > Ah, okay, I'll try SP1. I JUST received VPC 2004 about two weeks ago, > included with TechNet Plus. Bummer then, if they shipped recently, but > didn't include the service pack. > > Updates: > I wasn't real clear, but tried to install NT Workstation, using default NT > Workstation settings (64MB RAM included), same error. > > I have since tried it on an old computer here (a PII), and setup went fine > using the same ISO image file. I was thinking I would transport that to > my > P4 machine at work, to see if I get past the setup process anyway. But, > if > there are issues with NT4 on a P4, then it seems more like obtaining and > installing SP1 is the way to go. > > Thanks! > > "Colin Barnhorst" wrote: > >> If you have a Prescott processor, be sure you have SP1. NT4 will not run >> without it. It is probably the memory, as Robert says. >> >> -- >> Colin Barnhorst [MVP Windows - Virtual Machine] >> (Reply to the group only unless otherwise requested) >> "JoesCat" <JoesCat(a)discussions.microsoft.com> wrote in message >> news:5619DBE3-F959-4F01-A62E-05AE0707D9A9(a)microsoft.com... >> > Virtual PC 2004, trying to setup an NT Server. >> > Using either a known good CD, and its ISO image, from a CD and copied >> > to >> > hard disk, >> > setup starts, then after a few seconds into the setup process, >> > >> > "An unrecoverable processor error has been encountered. >> > >> > The virtual machine will reset now." >> > >> > Of course, I chose NT Server as the virtual machine type, and raised >> > the >> > RAM to 256MB. >> > Also tried NT Workstation, in a new VPC, default settings, same error. >> > >> > This is running on a P4 machine, with 2GB of RAM. >> > It installs and runs Server 2003 and WinXP fine. >> > >> > Any ideas? I'm very new to Virtual PC, and I've never setup an NT on >> > it >> > before. >> > >> > Here's the virtual PC's screen: >> > >> > *** STOP: 0x0000003E (0x00000080,0x00000000,0x00000000,0x00000000) >> > >> > >> > >> > >> > >> > p5-0000 irql:1f SYSVER 0xf0000565 >> > >> > >> > >> > Dll Base DateStmp - Name Dll Base DateStmp - Name >> > >> > 80100000 3202c097 - ntoskrnl.exe 80001000 31ee6c52 - hal.dll >> > >> > 801fb000 31f51355 - setupdd.sys 80062000 31ec792d - SPDDLANG.SYS >> > >> > 8022f000 31f8ff94 - pcmcia.sys 80239000 31ec6c74 - SCSIPORT.SYS >> > >> > 80063000 31ed06b4 - cpqarray.sys 80241000 31ed06b5 - delldsa.sys >> > >> > 80243000 31ed06b4 - atapi.sys 80248000 31ed06b9 - ncr53c9x.sys >> > >> > 8024b000 31ed06ba - spock.sys 8024d000 31ed06b9 - oliscsi.sys >> > >> > 80251000 31ed06c2 - ncrc700.sys 80254000 31ed06c2 - ncrc710.sys >> > >> > 80257000 31f05449 - aha154x.sys 8025a000 31ed06be - sparrow.sys >> > >> > 8025f000 31ed06b2 - aha174x.sys 80261000 31ed06b5 - dptscsi.sys >> > >> > 80264000 31ed06bc - ultra14f.sys 80266000 31ed06bd - ultra24f.sys >> > >> > 80268000 31ed06b3 - ami0nt.sys 8026a000 31ed06be - fd7000ex.sys >> > >> > 8026c000 31ed06b7 - fd8xx.sys 8026f000 31ed06b6 - fd16_700.sys >> > >> > 80272000 31ed06bf - arrow.sys 8027b000 31ed22d4 - symc810.sys >> > >> > 80280000 31ed06b4 - buslogic.sys 80282000 31ed06c1 - slcd32.sys >> > >> > 80289000 31ed06bf - aic78xx.sys 80290000 31ed06b8 - dac960nt.sys >> > >> > 80293000 31ed06ba - ql10wnt.sys 8029a000 31ed06b3 - amsint.sys >> > >> > 8038a000 31ed06c0 - flashpnt.sys 80395000 31ed06c0 - cpqfws2e.sys >> > >> > 8039f000 31ec6c8f - atdisk.sys 803a6000 31ec6c76 - abiosdsk.sys >> > >> > 803a9000 31eedd07 - fastfat.sys 803ca000 31eed0a7 - ntfs.sys >> > >> > 80422000 31ec6c6d - vga.sys 80426000 31f50722 - VIDEOPRT.SYS >> > >> > 8042c000 31ec6c8d - floppy.sys 80431000 31ec6ca1 - cdrom.sys >> > >> > 80437000 31ec6c7a - CLASS2.SYS 8043b000 31ed237c - disk.sys >> > >> > 8043f000 31ec6ca5 - sfloppy.sys 80441000 31ec6c90 - i8042prt.sys >> > >> > 80447000 31ec6c94 - kbdclass.sys 8044a000 31ec6e8f - cdfs.sys >> > >> > >> > >> >> >> |