From: Stroonz on
I"ve scoured the net, but cannot find a datasheet, pinout, or a
schematic that uses this IC, which is a 16 pin surface mount power
supply controller. I have a power supply that had two blown mosfets,
four resistors, and I replaced the IC because they usually get smoked
with this much damage in the circuit. It won't fire, and I can't find
any Vcc anywhere on the IC. I have the bridge voltage to the mosfets,
but nothing else. Can anyone point me a datasheet or schematic
(anyone's) that uses this IC? Incidentally, it comes out of a Philips
TV 26PF5320/28 chassis LC4.3U. Thanks.
From: Franc Zabkar on
On Sun, 25 Oct 2009 04:52:07 -0700 (PDT), Stroonz <str00ntz(a)aol.com>
put finger to keyboard and composed:

>I"ve scoured the net, but cannot find a datasheet, pinout, or a
>schematic that uses this IC, which is a 16 pin surface mount power
>supply controller.

90W Resonant SMPS with TEA1610 SwingChip:
http://www.nxp.com/acrobat_download/applicationnotes/AN99011_1.pdf
http://www.datasheetarchive.com/pdf/Datasheet-02/DSA0020653.pdf

Pin 11 is VDD. It is derived from the bulk cap via a high ohm
resistor.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
From: Stroonz on
On Oct 25, 3:02 pm, Franc Zabkar <fzab...(a)iinternode.on.net> wrote:
> On Sun, 25 Oct 2009 04:52:07 -0700 (PDT), Stroonz <str00...(a)aol.com>
> put finger to keyboard and composed:
>
> >I"ve scoured the net, but cannot find a datasheet, pinout, or a
> >schematic that uses this IC, which is a 16 pin surface mount power
> >supply controller.
>
> 90W Resonant SMPS with TEA1610 SwingChip:http://www.nxp.com/acrobat_download/applicationnotes/AN99011_1.pdfhttp://www.datasheetarchive.com/pdf/Datasheet-02/DSA0020653.pdf
>
> Pin 11 is VDD. It is derived from the bulk cap via a high ohm
> resistor.
>
> - Franc Zabkar
> --
> Please remove one 'i' from my address when replying by email.

Hi Frank, thanks for the time and trouble. I actually found that very
schematic, but the circuit uses a TEA1601, not the 1601T which is an
smd. I don't know if the pinout would be the same between the DIP and
the smd. For some reason, there is virtually no information on the
IC. I found a site through google that had a datasheet by selecting
the "cached" option, but when clicking on the .pdf download link, it
goes to the site's current page which doesn't have that info any
longer. Very frustrating. Thanks again.

 | 
Pages: 1
Prev: sony evo 9850
Next: Sony CFD-460