Network slow after Domain join [Network and Web]

Prev: internet connection lost after ten minutes online
Next: Unable to browse the network in Windows Explorer

From: grazer on 11 Dec 2008 07:16

OK - have looked for those values in the registry and do not have them on our
machines. Are these the only values suggested by Microsoft which need fixed?

Many thanks,

Graham

"Brian" wrote:

> Yes, it worked on the test box. I'm still gettting error 5703 in the netlogon
> log but it's no longer timing out for 10 minutes. We can at least start
> adding the old ibm workstations to the domain.
>
> /Brian
>
> "Grazer" wrote:
>
> > Brian - was your fix the same as described by Jonas_Bson?
> >
> > Regards,
> > Graham
> >
> > "Brian" wrote:
> >
> > > Wow, thanks!
> > >
> > > I just happened to open a case with Microsoft too. Everything seems to be
> > > working now. No more waiting 10minutes to log into the domain.
> > >
> > > Thanks again,
> > > Brian
> > >
> > > "Jonas_Bson" wrote:
> > >
> > > > Hello,
> > > >
> > > > MS-support did help us with our problem after a while. The problem we had
> > > > was that we where missing 4 reg-values for the local system account hive and
> > > > one other hive. The keys that was missing was:
> > > > MUILanguagePending under HKEY_USERS\S-1-5-19\Control Panel\Desktop
> > > > MUILanguagePending under HKEY_USERS\S-1-5-20\Control Panel\Desktop
> > > > and
> > > > MultiUILanguageID under HKEY_USERS\S-1-5-19\Control Panel\Desktop
> > > > MultiUILanguageID under HKEY_USERS\S-1-5-20\Control Panel\Desktop
> > > >
> > > > Theese String-keys has to be the same as the corresponding keys under
> > > > "HKEY_USERS\S-1-5-18\Control Panel\Desktop\"
> > > >
> > > >
> > > >
> > > > "Brian" wrote:
> > > >
> > > > > I came across your post after searching around for a solution to Event ID
> > > > > 5703. We too are having the exact same problem. Did you manage to find a
> > > > > solution? I notice that this only seems to affect our IBM workstations that
> > > > > had their OS preinstalled. Our other workstations are working smoothly.
> > > > >
> > > > > Any help would be greatly appreciated!
> > > > >
> > > > >
> > > > > "Jonas_Bson" wrote:
> > > > >
> > > > > > When i turned on netlogon logging i found this in netlogon.log
> > > > > >
> > > > > > "
> > > > > > 10/16 21:14:46 [MAILSLOT] Going to wait on mailslot. (Timeout: 330290)
> > > > > > 10/16 21:15:16 [MAILSLOT] Received PNP opcode 0x2 on transport:
> > > > > > \Device\NetBT_Tcpip_{E4F60F52-CA75-4563-8E2B-8262D62F92CD}
> > > > > > 10/16 21:15:16 [CRITICAL] Error in reading mailslot message from browser.
> > > > > > WinStatus = 3
> > > > > > 10/16 21:15:16 [MISC] Eventlog: 5703 (2) 3 00000003 ....
> > > > > > 10/16 21:15:16 [CRITICAL] Error writing this event in the eventlog, Status =
> > > > > > 1717
> > > > > > 10/16 21:15:18 [CRITICAL] Error in reading mailslot message from browser.
> > > > > > WinStatus = 3
> > > > > > 10/16 21:15:18 [MISC] Eventlog: 5703 (2) 3 00000003 ....
> > > > > > 10/16 21:15:18 [CRITICAL] Error writing this event in the eventlog, Status =
> > > > > > 1717
> > > > > > 10/16 21:15:19 [MAILSLOT] Going to wait on mailslot. (Timeout: 298284)
> > > > > > 10/16 21:25:24 [INIT] Group Policy is not defined for Netlogon
> > > > > > 10/16 21:25:24 [INIT] Following are the effective values after parsing
> > > > > > 10/16 21:25:24 [INIT] Sysvol = C:\WINDOWS\SYSVOL\SYSVOL
> > > > > > 10/16 21:25:24 [INIT] Scripts = (null)
> > > > > > 10/16 21:25:24 [INIT] SiteName (0) = Default-First-Site-Name
> > > > > > 10/16 21:25:24 [INIT] RpcDacl = (null)
> > > > > > "
> > > > > >
> > > > > > So that seems to be the problem but I have no idea how to solve it. googling
> > > > > > on thoose error messages does not bring up any good results.
> > > > > >
> > > > > > /Jonas
> > > > > >
> > > > > > "Jonas_Bson" wrote:
> > > > > >
> > > > > > > If I disable netlogn the machine boots fast..
> > > > > > >
> > > > > > > If i uninstall "client for microsoft network" it also boots fast.. anyone
> > > > > > > has any good tips/ideas on how to troubleshoot netlogon... I've tried
> > > > > > > uninstalling and reinstalling it but when It's reinstalled it still is 10
> > > > > > > mins startup time.
> > > > > > >
> > > > > > > /Jonas
> > > > > > >
> > > > > > > "Jonas_Bson" wrote:
> > > > > > >
> > > > > > > > Hello,
> > > > > > > >
> > > > > > > > The PC's im currently labbing with are desktop so they dont have the
> > > > > > > > powersave option.
> > > > > > > >
> > > > > > > > /Joans
> > > > > > > >
> > > > > > > > "Anteaus" wrote:
> > > > > > > >
> > > > > > > > > Firstly, it is unusual to join an AD domain with Netware components installed.
> > > > > > > > >
> > > > > > > > > If this is the Microsoft Netwarel Client then it shoudl be Ok, if it's the
> > > > > > > > > Novell proprietary Client then I would expect there to be problems!
> > > > > > > > >
> > > > > > > > > Second, check for faulty powersave options on the LAN card. These are
> > > > > > > > > responsible for a whole gamut of network issues.
> > > > > > > > >
> > > > > > > > > http://mylogon.net/support/psave
> > > > > > > > >
> > > > > > > > > "Jonas_Bson" wrote:
> > > > > > > > >
> > > > > > > > > > Forgot to mention:
> > > > > > > > > >
> > > > > > > > > > I also tried Safe Mode without networking and still 10min waiting time
> > > > > > > > > > before login prompt!
> > > > > > > > > >
> > > > > > > > > > > >

From: Wes Kroesbergen Wes on 18 Dec 2008 13:46

We had a similar problem on our network. We also have the same error messages
in our netlogon debug file, so I'm not sure that's the cause. We found that
our problem was related to the Roxio services installed with BlackBerry
Desktop Manager 4.6 (possibly earlier versions, but 4.6 is what we were
using). After disabling the services below, clients were back to a
respectable login period again.
Services installed by BDM affecting usage:
LiveShare P2P Service
Roxio Hard Drive Watcher 9
Roxio UPnP Renderer 9
Roxio UPnP Server 9
RoxMediaDB9

Do you have BDM installed? Are these services running? If so, try disabling
them and see what happens.
Wes Kroesbergen
http://www.kroesbergens.com

"Brian" wrote:

> Yes, it worked on the test box. I'm still gettting error 5703 in the netlogon
> log but it's no longer timing out for 10 minutes. We can at least start
> adding the old ibm workstations to the domain.
>
> /Brian
>
> "Grazer" wrote:
>
> > Brian - was your fix the same as described by Jonas_Bson?
> >
> > Regards,
> > Graham
> >
> > "Brian" wrote:
> >
> > > Wow, thanks!
> > >
> > > I just happened to open a case with Microsoft too. Everything seems to be
> > > working now. No more waiting 10minutes to log into the domain.
> > >
> > > Thanks again,
> > > Brian
> > >
> > > "Jonas_Bson" wrote:
> > >
> > > > Hello,
> > > >
> > > > MS-support did help us with our problem after a while. The problem we had
> > > > was that we where missing 4 reg-values for the local system account hive and
> > > > one other hive. The keys that was missing was:
> > > > MUILanguagePending under HKEY_USERS\S-1-5-19\Control Panel\Desktop
> > > > MUILanguagePending under HKEY_USERS\S-1-5-20\Control Panel\Desktop
> > > > and
> > > > MultiUILanguageID under HKEY_USERS\S-1-5-19\Control Panel\Desktop
> > > > MultiUILanguageID under HKEY_USERS\S-1-5-20\Control Panel\Desktop
> > > >
> > > > Theese String-keys has to be the same as the corresponding keys under
> > > > "HKEY_USERS\S-1-5-18\Control Panel\Desktop\"
> > > >
> > > >
> > > >
> > > > "Brian" wrote:
> > > >
> > > > > I came across your post after searching around for a solution to Event ID
> > > > > 5703. We too are having the exact same problem. Did you manage to find a
> > > > > solution? I notice that this only seems to affect our IBM workstations that
> > > > > had their OS preinstalled. Our other workstations are working smoothly.
> > > > >
> > > > > Any help would be greatly appreciated!
> > > > >
> > > > >
> > > > > "Jonas_Bson" wrote:
> > > > >
> > > > > > When i turned on netlogon logging i found this in netlogon.log
> > > > > >
> > > > > > "
> > > > > > 10/16 21:14:46 [MAILSLOT] Going to wait on mailslot. (Timeout: 330290)
> > > > > > 10/16 21:15:16 [MAILSLOT] Received PNP opcode 0x2 on transport:
> > > > > > \Device\NetBT_Tcpip_{E4F60F52-CA75-4563-8E2B-8262D62F92CD}
> > > > > > 10/16 21:15:16 [CRITICAL] Error in reading mailslot message from browser.
> > > > > > WinStatus = 3
> > > > > > 10/16 21:15:16 [MISC] Eventlog: 5703 (2) 3 00000003 ....
> > > > > > 10/16 21:15:16 [CRITICAL] Error writing this event in the eventlog, Status =
> > > > > > 1717
> > > > > > 10/16 21:15:18 [CRITICAL] Error in reading mailslot message from browser.
> > > > > > WinStatus = 3
> > > > > > 10/16 21:15:18 [MISC] Eventlog: 5703 (2) 3 00000003 ....
> > > > > > 10/16 21:15:18 [CRITICAL] Error writing this event in the eventlog, Status =
> > > > > > 1717
> > > > > > 10/16 21:15:19 [MAILSLOT] Going to wait on mailslot. (Timeout: 298284)
> > > > > > 10/16 21:25:24 [INIT] Group Policy is not defined for Netlogon
> > > > > > 10/16 21:25:24 [INIT] Following are the effective values after parsing
> > > > > > 10/16 21:25:24 [INIT] Sysvol = C:\WINDOWS\SYSVOL\SYSVOL
> > > > > > 10/16 21:25:24 [INIT] Scripts = (null)
> > > > > > 10/16 21:25:24 [INIT] SiteName (0) = Default-First-Site-Name
> > > > > > 10/16 21:25:24 [INIT] RpcDacl = (null)
> > > > > > "
> > > > > >
> > > > > > So that seems to be the problem but I have no idea how to solve it. googling
> > > > > > on thoose error messages does not bring up any good results.
> > > > > >
> > > > > > /Jonas
> > > > > >
> > > > > > "Jonas_Bson" wrote:
> > > > > >
> > > > > > > If I disable netlogn the machine boots fast..
> > > > > > >
> > > > > > > If i uninstall "client for microsoft network" it also boots fast.. anyone
> > > > > > > has any good tips/ideas on how to troubleshoot netlogon... I've tried
> > > > > > > uninstalling and reinstalling it but when It's reinstalled it still is 10
> > > > > > > mins startup time.
> > > > > > >
> > > > > > > /Jonas
> > > > > > >
> > > > > > > "Jonas_Bson" wrote:
> > > > > > >
> > > > > > > > Hello,
> > > > > > > >
> > > > > > > > The PC's im currently labbing with are desktop so they dont have the
> > > > > > > > powersave option.
> > > > > > > >
> > > > > > > > /Joans
> > > > > > > >
> > > > > > > > "Anteaus" wrote:
> > > > > > > >
> > > > > > > > > Firstly, it is unusual to join an AD domain with Netware components installed.
> > > > > > > > >
> > > > > > > > > If this is the Microsoft Netwarel Client then it shoudl be Ok, if it's the
> > > > > > > > > Novell proprietary Client then I would expect there to be problems!
> > > > > > > > >
> > > > > > > > > Second, check for faulty powersave options on the LAN card. These are
> > > > > > > > > responsible for a whole gamut of network issues.
> > > > > > > > >
> > > > > > > > > http://mylogon.net/support/psave
> > > > > > > > >
> > > > > > > > > "Jonas_Bson" wrote:
> > > > > > > > >
> > > > > > > > > > Forgot to mention:
> > > > > > > > > >
> > > > > > > > > > I also tried Safe Mode without networking and still 10min waiting time
> > > > > > > > > > before login prompt!
> > > > > > > > > >
> > > > > > > > > > > >

From: Wes Kroesbergen Wes on 18 Dec 2008 13:48

From: Wes Kroesbergen on 18 Dec 2008 13:50

First | Prev |
Pages: 1 2
Prev: internet connection lost after ten minutes online
Next: Unable to browse the network in Windows Explorer