Prev: [PATCH] tracecmd: Add initial python tracecmd API
Next: x86: do_debug && PTRACE_SINGLESTEP broken by 08d68323d1f0c34452e614263b212ca556dae47f
From: john stultz on 17 Dec 2009 19:50
This patch converts arm to use GENERIC_TIME via the arch_getoffset()
infrastructure, reducing the amount of arch specific code we need to
maintain.

The arm architecture is one of the last 3 arches that need to be
converted.

This patch applies on top of Linus' current -git tree

I've taken my best swing at converting this, but I'm not 100% confident
I got it right. My cross-compiler is now out of date (gcc4.2) so I
wasn't able to check if it compiled. Any assistance from arch
maintainers or testers to get this merged would be great.

thanks
-john

Signed-off-by: John Stultz <johnstul(a)us.ibm.com>
---
Kconfig | 51 ++++++++++++++++++----------------
include/asm/mach/time.h | 2 -
kernel/time.c | 71 ++++--------------------------------------------
mach-at91/Kconfig | 10 ------
4 files changed, 35 insertions(+), 99 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 233a222..5696cb4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -37,6 +37,11 @@ config GENERIC_GPIO

config GENERIC_TIME
bool
+ default y
+
+config ARCH_USES_GETTIMEOFFSET
+ bool
+ default n

config GENERIC_CLOCKEVENTS
bool
@@ -211,6 +216,7 @@ config ARCH_AAEC2000
select CPU_ARM920T
select ARM_AMBA
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Agilent AAEC-2000

@@ -221,6 +227,7 @@ config ARCH_INTEGRATOR
select HAVE_CLK
select COMMON_CLKDEV
select ICST525
+ select ARCH_USES_GETTIMEOFFSET
help
Support for ARM's Integrator platform.

@@ -230,7 +237,6 @@ config ARCH_REALVIEW
select HAVE_CLK
select COMMON_CLKDEV
select ICST307
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
help
@@ -243,7 +249,6 @@ config ARCH_VERSATILE
select HAVE_CLK
select COMMON_CLKDEV
select ICST307
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
help
@@ -254,6 +259,7 @@ config ARCH_AT91
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
@@ -261,6 +267,7 @@ config ARCH_AT91
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Cirrus Logic 711x/721x based boards.

@@ -269,6 +276,7 @@ config ARCH_GEMINI
select CPU_FA526
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
help
Support for the Cortina Systems Gemini family SoCs

@@ -277,6 +285,7 @@ config ARCH_EBSA110
select CPU_SA110
select ISA
select NO_IOPORT
+ select ARCH_USES_GETTIMEOFFSET
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
@@ -293,6 +302,7 @@ config ARCH_EP93XX
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for the Cirrus EP93xx series of CPUs.

@@ -300,13 +310,13 @@ config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
select FOOTBRIDGE
+ select ARCH_USES_GETTIMEOFFSET
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.

config ARCH_MXC
bool "Freescale MXC/iMX-based"
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_MTD_XIP
select GENERIC_GPIO
@@ -321,7 +331,6 @@ config ARCH_STMP3XXX
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select USB_ARCH_HAS_EHCI
@@ -333,7 +342,6 @@ config ARCH_NETX
select CPU_ARM926T
select ARM_VIC
select GENERIC_CLOCKEVENTS
- select GENERIC_TIME
help
This enables support for systems based on the Hilscher NetX Soc

@@ -341,6 +349,7 @@ config ARCH_H720X
bool "Hynix HMS720x-based"
select CPU_ARM720T
select ISA_DMA_API
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Hynix HMS720x

@@ -351,7 +360,6 @@ config ARCH_NOMADIK
select CPU_ARM926T
select HAVE_CLK
select COMMON_CLKDEV
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
@@ -366,6 +374,7 @@ config ARCH_IOP13XX
select PCI
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IOP13XX (XScale) family of processors.

@@ -377,6 +386,7 @@ config ARCH_IOP32X
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's 80219 and IOP32X (XScale) family of
processors.
@@ -389,6 +399,7 @@ config ARCH_IOP33X
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IOP33X (XScale) family of processors.

@@ -397,6 +408,7 @@ config ARCH_IXP23XX
depends on MMU
select CPU_XSC3
select PCI
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IXP23xx (XScale) family of processors.

@@ -405,6 +417,7 @@ config ARCH_IXP2000
depends on MMU
select CPU_XSCALE
select PCI
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IXP2400/2800 (XScale) family of processors.

@@ -413,7 +426,6 @@ config ARCH_IXP4XX
depends on MMU
select CPU_XSCALE
select GENERIC_GPIO
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select DMABOUNCE if PCI
help
@@ -423,6 +435,7 @@ config ARCH_L7200
bool "LinkUp-L7200"
select CPU_ARM720T
select FIQ
+ select ARCH_USES_GETTIMEOFFSET
help
Say Y here if you intend to run this kernel on a LinkUp Systems
L7200 Software Development Board which uses an ARM720T processor.
@@ -438,7 +451,6 @@ config ARCH_DOVE
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
@@ -450,7 +462,6 @@ config ARCH_KIRKWOOD
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
@@ -460,7 +471,6 @@ config ARCH_KIRKWOOD
config ARCH_LOKI
bool "Marvell Loki (88RC8480)"
select CPU_FEROCEON
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
@@ -472,7 +482,6 @@ config ARCH_MV78XX0
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
@@ -486,7 +495,6 @@ config ARCH_ORION5X
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
@@ -501,7 +509,6 @@ config ARCH_MMP
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select COMMON_CLKDEV
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
@@ -513,6 +520,7 @@ config ARCH_KS8695
select CPU_ARM922T
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
@@ -521,7 +529,6 @@ config ARCH_NS9XXX
bool "NetSilicon NS9xxx"
select CPU_ARM926T
select GENERIC_GPIO
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_CLK
help
@@ -537,7 +544,6 @@ config ARCH_W90X900
select GENERIC_GPIO
select HAVE_CLK
select COMMON_CLKDEV
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
Support for Nuvoton (Winbond logic dept.) ARM9 processor,
@@ -552,6 +558,7 @@ config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for Philips PNX4008 mobile platform.

@@ -564,7 +571,6 @@ config ARCH_PXA
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
@@ -574,7 +580,6 @@ config ARCH_PXA
config ARCH_MSM
bool "Qualcomm MSM"
select CPU_V6
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
Support for Qualcomm MSM7K based systems. This runs on the ARM11
@@ -592,6 +597,7 @@ config ARCH_RPC
select ISA_DMA_API
select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE
+ select ARCH_USES_GETTIMEOFFSET
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -605,7 +611,6 @@ config ARCH_SA1100
select ARCH_HAS_CPUFREQ
select CPU_FREQ
select GENERIC_GPIO
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select TICK_ONESHOT
@@ -618,6 +623,7 @@ config ARCH_S3C2410
select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -627,6 +633,7 @@ config ARCH_S3C64XX
bool "Samsung S3C64XX"
select GENERIC_GPIO
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
select ARCH_HAS_CPUFREQ
help
Samsung S3C64XX series based systems
@@ -646,6 +653,7 @@ config ARCH_SHARK
select ISA_DMA
select ZONE_DMA
select PCI
+ select ARCH_USES_GETTIMEOFFSET
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -655,6 +663,7 @@ config ARCH_LH7A40X
select CPU_ARM922T
select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
+ select ARCH_USES_GETTIMEOFFSET
help
Say Y here for systems based on one of the Sharp LH7A40X
System on a Chip processors. These CPUs include an ARM922T
@@ -668,7 +677,6 @@ config ARCH_U300
select HAVE_TCM
select ARM_AMBA
select ARM_VIC
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select COMMON_CLKDEV
@@ -679,7 +687,6 @@ config ARCH_U300
config ARCH_DAVINCI
bool "TI DaVinci"
select CPU_ARM926T
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
@@ -697,7 +704,6 @@ config ARCH_OMAP
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
@@ -708,7 +714,6 @@ config ARCH_BCMRING
select CPU_V6
select ARM_AMBA
select COMMON_CLKDEV
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
help
@@ -718,7 +723,6 @@ config ARCH_U8500
bool "ST-Ericsson U8500 Series"
select CPU_V7
select ARM_AMBA
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select COMMON_CLKDEV
help
@@ -839,7 +843,6 @@ config ARCH_ACORN
config PLAT_IOP
bool
select GENERIC_CLOCKEVENTS
- select GENERIC_TIME

config PLAT_ORION
bool
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index b2cc1fc..20c1d84 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -38,7 +38,7 @@ struct sys_timer {
void (*init)(void);
void (*suspend)(void);
void (*resume)(void);
-#ifndef CONFIG_GENERIC_TIME
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
unsigned long (*offset)(void);
#endif
};
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index d38cdf2..6c7e570 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -82,12 +82,15 @@ EXPORT_SYMBOL(profile_pc);
*/
int (*set_rtc)(void);

-#ifndef CONFIG_GENERIC_TIME
-static unsigned long dummy_gettimeoffset(void)
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+u32 arch_gettimeoffset(void)
{
+ if (system_timer->offset != NULL)
+ return system_timer->offset() * 1000;
+
return 0;
}
-#endif
+#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */

static unsigned long next_rtc_update;

@@ -237,64 +240,6 @@ static inline void do_leds(void)
#define do_leds()
#endif

-#ifndef CONFIG_GENERIC_TIME
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = system_timer->offset();
- sec = xtime.tv_sec;
- usec += xtime.tv_nsec / 1000;
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- /* usec may have gone up a lot: be safe */
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irq(&xtime_lock);
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * done, and then undo it!
- */
- nsec -= system_timer->offset() * NSEC_PER_USEC;
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- ntp_clear();
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
- return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-#endif /* !CONFIG_GENERIC_TIME */
-
/**
* save_time_delta - Save the offset between system time and RTC time
* @delta: pointer to timespec to store delta
@@ -392,10 +337,6 @@ device_initcall(timer_init_sysfs);

void __init time_init(void)
{
-#ifndef CONFIG_GENERIC_TIME
- if (system_timer->offset == NULL)
- system_timer->offset = dummy_gettimeoffset;
-#endif
system_timer->init();
}

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0b2ee95..923e8cc 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -23,14 +23,12 @@ choice
config ARCH_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3

config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE"
select CPU_ARM926T
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3
select HAVE_AT91_USART4
@@ -39,28 +37,24 @@ config ARCH_AT91SAM9260
config ARCH_AT91SAM9261
bool "AT91SAM9261"
select CPU_ARM926T
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL

config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
select CPU_ARM926T
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL

config ARCH_AT91SAM9263
bool "AT91SAM9263"
select CPU_ARM926T
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL

config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
select CPU_ARM926T
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3
select HAVE_FB_ATMEL
@@ -68,7 +62,6 @@ config ARCH_AT91SAM9RL
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
select CPU_ARM926T
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3
select HAVE_AT91_USART4
@@ -77,7 +70,6 @@ config ARCH_AT91SAM9G20
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
select CPU_ARM926T
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3
select HAVE_FB_ATMEL
@@ -85,12 +77,12 @@ config ARCH_AT91SAM9G45
config ARCH_AT91CAP9
bool "AT91CAP9"
select CPU_ARM926T
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL

config ARCH_AT91X40
bool "AT91x40"
+ select ARCH_USES_GETTIMEOFFSET

endchoice



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: [PATCH] tracecmd: Add initial python tracecmd API
Next: x86: do_debug && PTRACE_SINGLESTEP broken by 08d68323d1f0c34452e614263b212ca556dae47f