Prev: [PATCH 7/9] drivers/input/tablet: Use pr_fmt and pr_<level>
Next: [GIT PULL] Performance events updates for v2.6.36
From: Joe Perches on 5 Aug 2010 03:40
Move error messages from array to direct uses.
Convert bare printks to pr_cont

Signed-off-by: Joe Perches <joe(a)perches.com>
---
drivers/input/keyboard/amikbd.c | 42 ++++++++++++++++-------
drivers/input/keyboard/atakbd.c | 4 ++-
drivers/input/keyboard/hil_kbd.c | 21 +++++-------
drivers/input/keyboard/hilkbd.c | 26 ++++++++-------
drivers/input/keyboard/jornada680_kbd.c | 5 ++-
drivers/input/keyboard/jornada720_kbd.c | 10 +++--
drivers/input/keyboard/lkkbd.c | 54 +++++++++++++++----------------
drivers/input/keyboard/locomokbd.c | 6 ++-
drivers/input/keyboard/newtonkbd.c | 4 ++-
drivers/input/keyboard/omap-keypad.c | 25 +++++++-------
drivers/input/keyboard/sunkbd.c | 9 +++--
drivers/input/keyboard/xtkbd.c | 7 +++-
12 files changed, 119 insertions(+), 94 deletions(-)

diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c
index 79172af..61f92a5 100644
--- a/drivers/input/keyboard/amikbd.c
+++ b/drivers/input/keyboard/amikbd.c
@@ -29,6 +29,8 @@
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/input.h>
@@ -144,17 +146,6 @@ static unsigned char amikbd_keycode[0x78] __initdata = {
[103] = KEY_RIGHTMETA
};

-static const char *amikbd_messages[8] = {
- [0] = KERN_ALERT "amikbd: Ctrl-Amiga-Amiga reset warning!!\n",
- [1] = KERN_WARNING "amikbd: keyboard lost sync\n",
- [2] = KERN_WARNING "amikbd: keyboard buffer overflow\n",
- [3] = KERN_WARNING "amikbd: keyboard controller failure\n",
- [4] = KERN_ERR "amikbd: keyboard selftest failure\n",
- [5] = KERN_INFO "amikbd: initiate power-up key stream\n",
- [6] = KERN_INFO "amikbd: terminate power-up key stream\n",
- [7] = KERN_WARNING "amikbd: keyboard interrupt\n"
-};
-
static irqreturn_t amikbd_interrupt(int irq, void *data)
{
struct input_dev *dev = data;
@@ -177,8 +168,33 @@ static irqreturn_t amikbd_interrupt(int irq, void *data)
}

input_sync(dev);
- } else /* scancodes >= 0x78 are error codes */
- printk(amikbd_messages[scancode - 0x78]);
+ } else { /* scancodes >= 0x78 are error codes */
+ switch (scancode) {
+ case 0x78:
+ pr_alert("Ctrl-Amiga-Amiga reset warning!!\n");
+ break;
+ case 0x79:
+ pr_warning("keyboard lost sync\n");
+ break;
+ case 0x7a:
+ pr_warning("keyboard buffer overflow\n");
+ break;
+ case 0x7b:
+ pr_warning("keyboard controller failure\n");
+ break;
+ case 0x7c:
+ pr_err("keyboard selftest failure\n");
+ break;
+ case 0x7d:
+ pr_info("initiate power-up key stream\n");
+ break;
+ case 0x7e:
+ pr_info("terminate power-up key stream\n");
+ break;
+ case 0x7f:
+ pr_warning("keyboard interrupt\n");
+ break;
+ }

return IRQ_HANDLED;
}
diff --git a/drivers/input/keyboard/atakbd.c b/drivers/input/keyboard/atakbd.c
index 1839194..5975052 100644
--- a/drivers/input/keyboard/atakbd.c
+++ b/drivers/input/keyboard/atakbd.c
@@ -40,6 +40,8 @@
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/input.h>
@@ -210,7 +212,7 @@ static void atakbd_interrupt(unsigned char scancode, char down)
input_sync(atakbd_dev);
}
} else /* scancodes >= 0xf2 are mouse data, most likely */
- printk(KERN_INFO "atakbd: unhandled scancode %x\n", scancode);
+ pr_info("unhandled scancode %x\n", scancode);

return;
}
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index ddd5afd..cf6448a 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -31,6 +31,8 @@
*
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/hil.h>
#include <linux/input.h>
#include <linux/serio.h>
@@ -131,7 +133,7 @@ static void hil_dev_handle_command_response(struct hil_dev *dev)
/* These occur when device isn't present */
if (p != (HIL_ERR_INT | HIL_PKT_CMD)) {
/* Anything else we'd like to know about. */
- printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p);
+ pr_warning("Device sent unknown record %x\n", p);
}
goto out;
}
@@ -212,8 +214,7 @@ static void hil_dev_handle_ptr_events(struct hil_dev *ptr)
bool absdev, ax16;

if ((p & HIL_CMDCT_POL) != idx - 1) {
- printk(KERN_WARNING PREFIX
- "Malformed poll packet %x (idx = %i)\n", p, idx);
+ pr_warning("Malformed poll packet %x (idx = %i)\n", p, idx);
return;
}

@@ -267,7 +268,7 @@ static void hil_dev_handle_ptr_events(struct hil_dev *ptr)

static void hil_dev_process_err(struct hil_dev *dev)
{
- printk(KERN_WARNING PREFIX "errored HIL packet\n");
+ pr_warning("errored HIL packet\n");
dev->idx4 = 0;
complete(&dev->cmd_done); /* just in case somebody is waiting */
}
@@ -347,7 +348,7 @@ static void hil_dev_keyboard_setup(struct hil_dev *kbd)
input_dev->name = strlen(kbd->rnm) ? kbd->rnm : "HIL keyboard";
input_dev->phys = "hpkbd/input0";

- printk(KERN_INFO PREFIX "HIL keyboard found (did = 0x%02x, lang = %s)\n",
+ pr_info("HIL keyboard found (did = 0x%02x, lang = %s)\n",
did, hil_language[did & HIL_IDD_DID_TYPE_KB_LANG_MASK]);
}

@@ -433,11 +434,8 @@ static void hil_dev_pointer_setup(struct hil_dev *ptr)

input_dev->name = strlen(ptr->rnm) ? ptr->rnm : "HIL pointer device";

- printk(KERN_INFO PREFIX
- "HIL pointer device found (did: 0x%02x, axis: %s)\n",
- did, txt);
- printk(KERN_INFO PREFIX
- "HIL pointer has %i buttons and %i sets of %i axes\n",
+ pr_info("HIL pointer device found (did: 0x%02x, axis: %s)\n", did, txt);
+ pr_info("HIL pointer has %i buttons and %i sets of %i axes\n",
ptr->nbtn, naxsets, ptr->naxes);
}

@@ -511,8 +509,7 @@ static int hil_dev_connect(struct serio *serio, struct serio_driver *drv)
case HIL_IDD_DID_TYPE_CHAR:
if (HIL_IDD_NUM_BUTTONS(idd) ||
HIL_IDD_NUM_AXES_PER_SET(*idd)) {
- printk(KERN_INFO PREFIX
- "combo devices are not supported.\n");
+ pr_info("combo devices are not supported\n");
goto bail1;
}

diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c
index 5f72440..447f49a 100644
--- a/drivers/input/keyboard/hilkbd.c
+++ b/drivers/input/keyboard/hilkbd.c
@@ -15,6 +15,8 @@
* archive for more details.
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/pci_ids.h>
#include <linux/ioport.h>
#include <linux/module.h>
@@ -219,7 +221,7 @@ static int __devinit hil_keyb_init(void)

err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id);
if (err) {
- printk(KERN_ERR "HIL: Can't get IRQ\n");
+ pr_err("Can't get IRQ\n");
goto err1;
}

@@ -232,16 +234,16 @@ static int __devinit hil_keyb_init(void)

wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ);
if (!hil_dev.valid)
- printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n");
+ pr_warning("timed out, assuming no keyboard present\n");

c = hil_dev.c;
hil_dev.valid = 0;
if (c == 0) {
kbid = -1;
- printk(KERN_WARNING "HIL: no keyboard present\n");
+ pr_warning("no keyboard present\n");
} else {
kbid = ffz(~c);
- printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid);
+ pr_info("keyboard found at id %d\n", kbid);
}

/* set it to raw mode */
@@ -268,12 +270,12 @@ static int __devinit hil_keyb_init(void)

err = input_register_device(hil_dev.dev);
if (err) {
- printk(KERN_ERR "HIL: Can't register device\n");
+ pr_err("Can't register device\n");
goto err2;
}

- printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n",
- hil_dev.dev->name, kbid, HILBASE, HIL_IRQ);
+ pr_info("%s, ID %d at 0x%08lx (irq %d) found and attached\n",
+ hil_dev.dev->name, kbid, HILBASE, HIL_IRQ);

return 0;

@@ -306,8 +308,8 @@ static int __devinit hil_probe_chip(struct parisc_device *dev)
return -ENODEV;

if (!dev->irq) {
- printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n",
- (void *)dev->hpa.start);
+ pr_warning("IRQ not found for HIL bus at 0x%p\n",
+ (void *)dev->hpa.start);
return -ENODEV;
}

@@ -315,7 +317,7 @@ static int __devinit hil_probe_chip(struct parisc_device *dev)
hil_irq = dev->irq;
hil_dev.dev_id = dev;

- printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq);
+ pr_info("Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq);

return hil_keyb_init();
}
@@ -368,12 +370,12 @@ static int __init hil_init(void)
return -ENODEV;

if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
- printk(KERN_ERR "HIL: hardware register was not found\n");
+ pr_err("hardware register was not found\n");
return -ENODEV;
}

if (!request_region(HILBASE + HIL_DATA, 2, "hil")) {
- printk(KERN_ERR "HIL: IOPORT region already used\n");
+ pr_err("IOPORT region already used\n");
return -EIO;
}

diff --git a/drivers/input/keyboard/jornada680_kbd.c b/drivers/input/keyboard/jornada680_kbd.c
index 5fc976d..e2c7112 100644
--- a/drivers/input/keyboard/jornada680_kbd.c
+++ b/drivers/input/keyboard/jornada680_kbd.c
@@ -16,6 +16,8 @@
* published by the Free Software Foundation.
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/input.h>
#include <linux/input-polldev.h>
@@ -231,8 +233,7 @@ static int __devinit jornada680kbd_probe(struct platform_device *pdev)
return 0;

failed:
- printk(KERN_ERR "Jornadakbd: failed to register driver, error: %d\n",
- error);
+ pr_err("failed to register driver, error: %d\n", error);
platform_set_drvdata(pdev, NULL);
input_free_polled_device(poll_dev);
kfree(jornadakbd);
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index 2cd3e1d..f1995d8 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -15,6 +15,9 @@
* published by the Free Software Foundation.
*
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
@@ -67,9 +70,8 @@ static irqreturn_t jornada720_kbd_interrupt(int irq, void *dev_id)

if (jornada_ssp_inout(GETSCANKEYCODE) != TXDUMMY) {
printk(KERN_DEBUG
- "jornada720_kbd: "
- "GetKeycode command failed with ETIMEDOUT, "
- "flushed bus\n");
+ pr_fmt("GetKeycode command failed with ETIMEDOUT, "
+ "flushed bus\n"));
} else {
/* How many keycodes are waiting for us? */
count = jornada_ssp_byte(TXDUMMY);
@@ -132,7 +134,7 @@ static int __devinit jornada720_kbd_probe(struct platform_device *pdev)
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"jornadakbd", pdev);
if (err) {
- printk(KERN_INFO "jornadakbd720_kbd: Unable to grab IRQ\n");
+ pr_info("Unable to grab IRQ\n");
goto fail1;
}

diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c
index fa9bb6d..41d3770 100644
--- a/drivers/input/keyboard/lkkbd.c
+++ b/drivers/input/keyboard/lkkbd.c
@@ -61,6 +61,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -105,9 +107,9 @@ MODULE_PARM_DESC(lk201_compose_is_alt,

#undef LKKBD_DEBUG
#ifdef LKKBD_DEBUG
-#define DBG(x...) printk(x)
+#define DBG(format, arg...) pr_info(format, ##arg)
#else
-#define DBG(x...) do {} while (0)
+#define DBG(format, arg...) do { if (0) pr_info(format, ##arg); } while (0)
#endif

/* LED control */
@@ -384,18 +386,16 @@ static void lkkbd_detection_done(struct lkkbd *lk)

default:
strlcpy(lk->name, "Unknown DEC keyboard", sizeof(lk->name));
- printk(KERN_ERR
- "lkkbd: keyboard on %s is unknown, please report to "
+ pr_err("keyboard on %s is unknown, please report to "
"Jan-Benedict Glaw <jbglaw(a)lug-owl.de>\n", lk->phys);
- printk(KERN_ERR "lkkbd: keyboard ID'ed as:");
+ pr_err("keyboard ID'ed as:");
for (i = 0; i < LK_NUM_IGNORE_BYTES; i++)
- printk(" 0x%02x", lk->id[i]);
- printk("\n");
+ pr_cont(" 0x%02x", lk->id[i]);
+ pr_cont("\n");
break;
}

- printk(KERN_INFO "lkkbd: keyboard on %s identified as: %s\n",
- lk->phys, lk->name);
+ pr_info("keyboard on %s identified as: %s\n", lk->phys, lk->name);

/*
* Report errors during keyboard boot-up.
@@ -406,20 +406,18 @@ static void lkkbd_detection_done(struct lkkbd *lk)
break;

case LK_STUCK_KEY:
- printk(KERN_ERR "lkkbd: Stuck key on keyboard at %s\n",
+ pr_err("Stuck key on keyboard at %s\n",
lk->phys);
break;

case LK_SELFTEST_FAILED:
- printk(KERN_ERR
- "lkkbd: Selftest failed on keyboard at %s, "
- "keyboard may not work properly\n", lk->phys);
+ pr_err("Selftest failed on keyboard at %s, "
+ "keyboard may not work properly\n", lk->phys);
break;

default:
- printk(KERN_ERR
- "lkkbd: Unknown error %02x on keyboard at %s\n",
- lk->id[2], lk->phys);
+ pr_err("Unknown error %02x on keyboard at %s\n",
+ lk->id[2], lk->phys);
break;
}

@@ -427,9 +425,8 @@ static void lkkbd_detection_done(struct lkkbd *lk)
* Try to hint user if there's a stuck key.
*/
if (lk->id[2] == LK_STUCK_KEY && lk->id[3] != 0)
- printk(KERN_ERR
- "Scancode of stuck key is 0x%02x, keycode is 0x%04x\n",
- lk->id[3], lk->keycode[lk->id[3]]);
+ pr_err("Scancode of stuck key is 0x%02x, keycode is 0x%04x\n",
+ lk->id[3], lk->keycode[lk->id[3]]);
}

/*
@@ -444,10 +441,10 @@ static irqreturn_t lkkbd_interrupt(struct serio *serio,
unsigned int keycode;
int i;

- DBG(KERN_INFO "Got byte 0x%02x\n", data);
+ DBG("Got byte 0x%02x\n", data);

if (lk->ignore_bytes > 0) {
- DBG(KERN_INFO "Ignoring a byte on %s\n", lk->name);
+ DBG("Ignoring a byte on %s\n", lk->name);
lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;

if (lk->ignore_bytes == 0)
@@ -464,7 +461,7 @@ static irqreturn_t lkkbd_interrupt(struct serio *serio,
break;

case 0x01:
- DBG(KERN_INFO "Got 0x01, scheduling re-initialization\n");
+ DBG("Got 0x01, scheduling re-initialization\n");
lk->ignore_bytes = LK_NUM_IGNORE_BYTES;
lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;
schedule_work(&lk->tq);
@@ -478,8 +475,10 @@ static irqreturn_t lkkbd_interrupt(struct serio *serio,
case LK_PREFIX_KEY_DOWN:
case LK_MODE_CHANGE_ACK:
case LK_RESPONSE_RESERVED:
- DBG(KERN_INFO "Got %s and don't know how to handle...\n",
- response_name(data));
+#ifdef LKKBD_DEBUG
+ DBG("Got %s and don't know how to handle...\n",
+ response_name(data));
+#endif
break;

default:
@@ -489,9 +488,8 @@ static irqreturn_t lkkbd_interrupt(struct serio *serio,
!test_bit(keycode, input_dev->key));
input_sync(input_dev);
} else {
- printk(KERN_WARNING
- "%s: Unknown key with scancode 0x%02x on %s.\n",
- __FILE__, data, lk->name);
+ pr_warning("Unknown key with scancode 0x%02x on %s\n",
+ data, lk->name);
}
}

@@ -565,7 +563,7 @@ static int lkkbd_event(struct input_dev *dev,
break;

default:
- printk(KERN_ERR "%s(): Got unknown type %d, code %d, value %d\n",
+ pr_err("%s(): Got unknown type %d, code %d, value %d\n",
__func__, type, code, value);
}

diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c
index b1ab298..01e60bd 100644
--- a/drivers/input/keyboard/locomokbd.c
+++ b/drivers/input/keyboard/locomokbd.c
@@ -23,6 +23,8 @@
*
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -254,7 +256,7 @@ static int __devinit locomokbd_probe(struct locomo_dev *dev)
dev->length,
LOCOMO_DRIVER_NAME(dev))) {
err = -EBUSY;
- printk(KERN_ERR "locomokbd: Can't acquire access to io memory for keyboard\n");
+ pr_err("Can't acquire access to io memory for keyboard\n");
goto err_free_mem;
}

@@ -299,7 +301,7 @@ static int __devinit locomokbd_probe(struct locomo_dev *dev)
/* attempt to get the interrupt */
err = request_irq(dev->irq[0], locomokbd_interrupt, 0, "locomokbd", locomokbd);
if (err) {
- printk(KERN_ERR "locomokbd: Can't get irq for keyboard\n");
+ pr_err("Can't get irq for keyboard\n");
goto err_release_region;
}

diff --git a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c
index 48d1cab..2b60858 100644
--- a/drivers/input/keyboard/newtonkbd.c
+++ b/drivers/input/keyboard/newtonkbd.c
@@ -26,6 +26,8 @@
* Justin Cormack, 68 Dartmouth Park Road, London NW5 1SN, UK.
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/input.h>
@@ -76,7 +78,7 @@ static irqreturn_t nkbd_interrupt(struct serio *serio,
}

else if (data == 0xe7) /* end of init sequence */
- printk(KERN_INFO "input: %s on %s\n", nkbd->dev->name, serio->phys);
+ pr_info("%s on %s\n", nkbd->dev->name, serio->phys);
return IRQ_HANDLED;

}
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index a72e61d..2b85872 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -24,6 +24,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -195,15 +197,14 @@ static void omap_kp_tasklet(unsigned long data)
if (!(changed & (1 << row)))
continue;
#ifdef NEW_BOARD_LEARNING_MODE
- printk(KERN_INFO "omap-keypad: key %d-%d %s\n", col,
- row, (new_state[col] & (1 << row)) ?
- "pressed" : "released");
+ pr_info("key %d-%d %s\n",
+ col, row, (new_state[col] & (1 << row)) ?
+ "pressed" : "released");
#else
key = omap_kp_find_key(col, row);
if (key < 0) {
- printk(KERN_WARNING
- "omap-keypad: Spurious key event %d-%d\n",
- col, row);
+ pr_warning("Spurious key event %d-%d\n",
+ col, row);
/* We scan again after a couple of seconds */
spurious = 1;
continue;
@@ -300,7 +301,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
int i, col_idx, row_idx, irq_idx, ret;

if (!pdata->rows || !pdata->cols || !pdata->keymap) {
- printk(KERN_ERR "No rows, cols or keymap from pdata\n");
+ pr_err("No rows, cols or keymap from pdata\n");
return -EINVAL;
}

@@ -340,8 +341,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
/* Cols: outputs */
for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) {
if (gpio_request(col_gpios[col_idx], "omap_kp_col") < 0) {
- printk(KERN_ERR "Failed to request"
- "GPIO%d for keypad\n",
+ pr_err("Failed to request GPIO%d for keypad\n",
col_gpios[col_idx]);
goto err1;
}
@@ -350,8 +350,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
/* Rows: inputs */
for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) {
if (gpio_request(row_gpios[row_idx], "omap_kp_row") < 0) {
- printk(KERN_ERR "Failed to request"
- "GPIO%d for keypad\n",
+ pr_err("Failed to request GPIO%d for keypad\n",
row_gpios[row_idx]);
goto err2;
}
@@ -387,7 +386,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)

ret = input_register_device(omap_kp->input);
if (ret < 0) {
- printk(KERN_ERR "Unable to register omap-keypad input device\n");
+ pr_err("Unable to register omap-keypad input device\n");
goto err3;
}

@@ -478,7 +477,7 @@ static struct platform_driver omap_kp_driver = {

static int __init omap_kp_init(void)
{
- printk(KERN_INFO "OMAP Keypad Driver\n");
+ pr_info("OMAP Keypad Driver\n");
return platform_driver_register(&omap_kp_driver);
}

diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c
index a99a04b..41216ca 100644
--- a/drivers/input/keyboard/sunkbd.c
+++ b/drivers/input/keyboard/sunkbd.c
@@ -26,6 +26,8 @@
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/slab.h>
@@ -137,10 +139,9 @@ static irqreturn_t sunkbd_interrupt(struct serio *serio,
!(data & SUNKBD_RELEASE));
input_sync(sunkbd->dev);
} else {
- printk(KERN_WARNING
- "sunkbd.c: Unknown key (scancode %#x) %s.\n",
- data & SUNKBD_KEY,
- data & SUNKBD_RELEASE ? "released" : "pressed");
+ pr_warning("Unknown key (scancode %#x) %s.\n",
+ data & SUNKBD_KEY,
+ data & SUNKBD_RELEASE ? "released" : "pressed");
}
}
out:
diff --git a/drivers/input/keyboard/xtkbd.c b/drivers/input/keyboard/xtkbd.c
index 37b01d7..292110b 100644
--- a/drivers/input/keyboard/xtkbd.c
+++ b/drivers/input/keyboard/xtkbd.c
@@ -26,6 +26,8 @@
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/input.h>
@@ -76,8 +78,9 @@ static irqreturn_t xtkbd_interrupt(struct serio *serio,
input_report_key(xtkbd->dev, xtkbd->keycode[data & XTKBD_KEY], !(data & XTKBD_RELEASE));
input_sync(xtkbd->dev);
} else {
- printk(KERN_WARNING "xtkbd.c: Unknown key (scancode %#x) %s.\n",
- data & XTKBD_KEY, data & XTKBD_RELEASE ? "released" : "pressed");
+ pr_warning("Unknown key (scancode %#x) %s\n",
+ data & XTKBD_KEY,
+ data & XTKBD_RELEASE ? "released" : "pressed");
}
}
return IRQ_HANDLED;
--
1.7.2.19.g9a302

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: [PATCH 7/9] drivers/input/tablet: Use pr_fmt and pr_<level>
Next: [GIT PULL] Performance events updates for v2.6.36