Prev: [PATCH 0/6] perf trace: Add filter support
Next: user time going down on successive reads
From: Albin Tonnerre on 7 Sep 2009 06:00
This patch allows using KGDB over the console with the atmel_serial
driver.

Signed-off-by: Albin Tonnerre <albin.tonnerre(a)free-electrons.com>
---
changes: Use register access macros instead of __raw_readl/writel

drivers/serial/atmel_serial.c | 22 ++++++++++++++++++++++
1 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 607d43a..c562883 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1213,6 +1213,24 @@ static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser)
return ret;
}

+#ifdef CONFIG_CONSOLE_POLL
+static int atmel_poll_get_char(struct uart_port *port)
+{
+ while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY))
+ barrier();
+
+ return UART_GET_CHAR(port);
+}
+
+static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
+{
+ while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
+ barrier();
+
+ UART_PUT_CHAR(port, ch);
+}
+#endif
+
static struct uart_ops atmel_pops = {
.tx_empty = atmel_tx_empty,
.set_mctrl = atmel_set_mctrl,
@@ -1232,6 +1250,10 @@ static struct uart_ops atmel_pops = {
.config_port = atmel_config_port,
.verify_port = atmel_verify_port,
.pm = atmel_serial_pm,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = atmel_poll_get_char,
+ .poll_put_char = atmel_poll_put_char,
+#endif
};

/*
--
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: [PATCH 0/6] perf trace: Add filter support
Next: user time going down on successive reads