[PATCHv2 09/11] OMAP2: Devkit8000: Using gpio_is_valid macro
in [Kernel]
|
Prev: [PATCHv2 08/11] OMAP2: Devkit8000: Using the REGULATOR_SUPPLY macro
Next: PM / Hibernate: swap, switch to hibernate_io_handle
From: Thomas Weber on 2 Jun 2010 07:50 Using the macro gpio_is_valid for check of valid gpio pins. Signed-off-by: Thomas Weber <weber(a)corscience.de> --- arch/arm/mach-omap2/board-devkit8000.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 3da88c8..dbd16de 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -134,27 +134,27 @@ static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1); twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); - if (dssdev->reset_gpio != -EINVAL) + if (gpio_is_valid(dssdev->reset_gpio)) gpio_set_value(dssdev->reset_gpio, 1); return 0; } static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) { - if (dssdev->reset_gpio != -EINVAL) + if (gpio_is_valid(dssdev->reset_gpio)) gpio_set_value(dssdev->reset_gpio, 0); } static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev) { - if (dssdev->reset_gpio != -EINVAL) + if (gpio_is_valid(dssdev->reset_gpio)) gpio_set_value(dssdev->reset_gpio, 1); return 0; } static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) { - if (dssdev->reset_gpio != -EINVAL) + if (gpio_is_valid(dssdev->reset_gpio)) gpio_set_value(dssdev->reset_gpio, 0); } -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ |