Prev: Optics
Next: low MHz connector design consultant
From: Robert Baer on 30 Apr 2010 23:34
Nial Stewart wrote:
> One other thing is permission to remove unconnected pads in internal layers
> (if you haven't removed these in the gerbers, and you don't mind them
> being removed).
>
>
> Nial.
>
>
> "Robert Baer" <robertbaer(a)localnet.com> wrote in message
> news:xKOdnd1ePMepY0TWnZ2dnUVZ_qCdnZ2d(a)posted.localnet...
>> What other info should be included:
>>
>> 106AC-1d 04-17-2010 [this is name of board and date submitted]
>>
>> Basic Information:
>> 30 Pieces - 8 Day Lead Time
>> 0.8 x 2.3 Inches (2 Inch Mounting Centers)
>> Double Sided
>>
>> PCB Details:
>> TG-170 or Higher FR-4
>> .062 Board Thickness
>> One Ounce Copper
>> ENIG Finish BOTH Sides
>> BLUE Solder Mask BOTH Sides
>> WHITE Silk Screen BOTH Sides
>>
>> Pads / Holes:
>> Minimum Annular Ring / Restring .012
>> Number of Pads: 61
>> Number of Vias: 0
>> Number of Smds: 2
>> Smds in Top: 2
>> Smds in Bot: 0
>> Number of holes: 0
>> Blind or Buried Vias: 0
>> Total number of drills: 61
>>
>> Gerber RS-274X File Extension Key
>> .cmp - Top Copper / Component Side
>> .sol - Bottom Copper / Solder Side
>> .plc - Top Silk Screen Legend
>> .pls - Bottom Silk Screem Legend
>> .stc - Top Solder Mask Stop
>> .sts - Bottom Solder Mask Stop
>> .dim - Dimensions / PCB Outline
>> .drd - Plated-Thru Drillings (Excellon)
>> .hol - Unplated Drillings (Excellon) *Not Used if Absent*
>> .mill - Milling *Not Used if Absent*
>> .info - Information Files *Disregard if Not Needed*
>>
>> Contact Information:
>> (contact name)
>> (company name)
>> Phone:
>> Telefax:
>> E-mail:
>> Web URL:
>>
>> Shipping or Mailing Address:
>> (contact name)
>> (company name)
>> (company address)
>> (city state zip)
>
>
All of this has been helpful.
Thanks lots.
First  |  Prev  | 
Pages: 1 2
Prev: Optics
Next: low MHz connector design consultant