Prev: Fuzzy logic toolbox - Fuzzy controler
Next: substitude for "length"
From: Chris on 27 Jul 2010 01:23
Hi,
I'm trying to generate a PWM signal with a duty cycle that increases with time. I'm using the Simscape Controlled PWM Voltage block. Is it possible to have a block parameter vary with time? Or is there a different block that might accomplish the same goal?
Thanks,
Chris
From: Jean Baptiste Lanfrey on 27 Jul 2010 04:46
Hi Chris,
Depending on the version you are using there are several ways to do it.
You can use built-in blocks (physical signals from simscape foundation
library) and for instance compare a triangle carrier with an input signal
that will determine the duty cycle.
You can also use the simscape language to build you own PWM generator with
either a time varying duty cycle defined in the ssc file
(http://www.mathworks.com/access/helpdesk/help/toolbox/physmod/simscape/ref/time.html)
or as an input to your block.
HTH
Jean-Baptiste


"Chris " <christopher.woodruff(a)samsung.com> a �crit dans le message de news:
i2lqfo$doc$1(a)fred.mathworks.com...
> Hi,
> I'm trying to generate a PWM signal with a duty cycle that increases with
> time. I'm using the Simscape Controlled PWM Voltage block. Is it possible
> to have a block parameter vary with time? Or is there a different block
> that might accomplish the same goal?
> Thanks,
> Chris
>


From: Chris on 28 Jul 2010 01:15
Hi Jean-Baptiste,

Thanks for your reply. So far, I've been trying to generate the signal using built-in blocks (I'm not familiar enough with Simulink/PWM to try to build the generator myself). I'm a bit confused by the other method you suggest. I want the duty cycle to increase 10% every .1 seconds, so I created this signal using a ramp and rounding function. Can I input this as a parameter for another block? I don't really understand what you mean by "compare a triangle carrier with an input signal." Sorry for my simulink incompetence....

Thanks again!


"Jean Baptiste Lanfrey" <jlanfrey(a)mathworks.com> wrote in message <i2m6d7$4ie$1(a)fred.mathworks.com>...
> Hi Chris,
> Depending on the version you are using there are several ways to do it.
> You can use built-in blocks (physical signals from simscape foundation
> library) and for instance compare a triangle carrier with an input signal
> that will determine the duty cycle.
> You can also use the simscape language to build you own PWM generator with
> either a time varying duty cycle defined in the ssc file
> (http://www.mathworks.com/access/helpdesk/help/toolbox/physmod/simscape/ref/time.html)
> or as an input to your block.
> HTH
> Jean-Baptiste
>
>
> "Chris " <christopher.woodruff(a)samsung.com> a crit dans le message de news:
> i2lqfo$doc$1(a)fred.mathworks.com...
> > Hi,
> > I'm trying to generate a PWM signal with a duty cycle that increases with
> > time. I'm using the Simscape Controlled PWM Voltage block. Is it possible
> > to have a block parameter vary with time? Or is there a different block
> > that might accomplish the same goal?
> > Thanks,
> > Chris
> >
>
From: Jean Baptiste Lanfrey on 28 Jul 2010 03:47
Hi Chris,
you can definetly do it and it is not that complicated.
The method I was proposing is a simple one that is using a few built-in
blocks (a triangle source, a comparator and a duty cycle input).

Have a look there : http://en.wikipedia.org/wiki/Pulse-width_modulation. It
explains the simplest method to generate a PWM.

Once you've built this simple model, just connect a ramp (slope 10%/0.1s) to
the duty cycle input and you're done.

Jean-Baptiste

"Chris " <christopher.woodruff(a)samsung.com> a �crit dans le message de news:
i2oedf$coc$1(a)fred.mathworks.com...
> Hi Jean-Baptiste,
>
> Thanks for your reply. So far, I've been trying to generate the signal
> using built-in blocks (I'm not familiar enough with Simulink/PWM to try to
> build the generator myself). I'm a bit confused by the other method you
> suggest. I want the duty cycle to increase 10% every .1 seconds, so I
> created this signal using a ramp and rounding function. Can I input this
> as a parameter for another block? I don't really understand what you mean
> by "compare a triangle carrier with an input signal." Sorry for my
> simulink incompetence....
>
> Thanks again!
>
>
> "Jean Baptiste Lanfrey" <jlanfrey(a)mathworks.com> wrote in message
> <i2m6d7$4ie$1(a)fred.mathworks.com>...
>> Hi Chris,
>> Depending on the version you are using there are several ways to do it.
>> You can use built-in blocks (physical signals from simscape foundation
>> library) and for instance compare a triangle carrier with an input signal
>> that will determine the duty cycle.
>> You can also use the simscape language to build you own PWM generator
>> with either a time varying duty cycle defined in the ssc file
>> (http://www.mathworks.com/access/helpdesk/help/toolbox/physmod/simscape/ref/time.html)
>> or as an input to your block.
>> HTH
>> Jean-Baptiste
>>
>>
>> "Chris " <christopher.woodruff(a)samsung.com> a crit dans le message de
>> news: i2lqfo$doc$1(a)fred.mathworks.com...
>> > Hi,
>> > I'm trying to generate a PWM signal with a duty cycle that increases
>> > with time. I'm using the Simscape Controlled PWM Voltage block. Is it
>> > possible to have a block parameter vary with time? Or is there a
>> > different block that might accomplish the same goal?
>> > Thanks,
>> > Chris
>> >
>>


From: Chris on 29 Jul 2010 00:45
Yeah, I got it to work thanks. I actually had that wikipedia page bookmarked from about a month ago but didn't realize that it could be so helpful.

Thanks again for your help!

"Jean Baptiste Lanfrey" <jlanfrey(a)mathworks.com> wrote in message <i2onac$4f8$1(a)fred.mathworks.com>...
> Hi Chris,
> you can definetly do it and it is not that complicated.
> The method I was proposing is a simple one that is using a few built-in
> blocks (a triangle source, a comparator and a duty cycle input).
>
> Have a look there : http://en.wikipedia.org/wiki/Pulse-width_modulation. It
> explains the simplest method to generate a PWM.
>
> Once you've built this simple model, just connect a ramp (slope 10%/0.1s) to
> the duty cycle input and you're done.
>
> Jean-Baptiste
 | 
Pages: 1
Prev: Fuzzy logic toolbox - Fuzzy controler
Next: substitude for "length"