Port version difficulties (maybe one for the Python crowd)
in [Ports]
|
From: Kevin Golding on 7 Dec 2009 12:11 I've had a bit of a poke around and no real joy in figuring this out so let's see just how obvious the thing I'm missing is. I'm trying to create a new port and I'm getting in a tangle with the version number. Basically, the author of this software has given it a version number 0.1_0 which is incompatible with ports. Never fear! I simply set the port version to 0.1.0 which is. Now this wasn't too bad to deal with, I set "DISTNAME= ${PORTNAME}-0.1-0" to make it fetch just fine (yes, despite the version being 0.1_0 the tarball is 0.1-0). All well and good at the early stages. This is where it gets Pythonesque, and eventually problematic. Because of the version number I've also set: PYEASYINSTALL_EGG= ${PYDISTUTILS_PKGNAME:C/[^A-Za-z0-9.]+/_/g}-0.1_ 0-${PYTHON_VERSION:S/thon//}${PYEASYINSTALL_OSARCH}.egg This makes installing work. Uninstalling fails with: pkg_delete: unexec command for '/usr/local/bin/easy_install-2.6 -q -m -S /usr/local/lib/python2.6/site-packages -d usr/local/lib/python2.6/site- packages -s /usr/local/bin django-signals-ahoy==0.1.0' failed So because ports installed 0.1.0 and the author wrote 0.1_0 is fails. I did look at setting PYEASYINSTALL_UNINSTALLARGS but I must confess my attempts to turn PYDISTUTILS_PKGVERSION into 0.1_0 have so far failed (as in, apparently my regex has changed nothing). Which brings me to my question (or questions). a) Can anyone point me in the right direction for making the easy_install uninstall properly? or b) Should I simply change the version in the distfile so that is uses more standard syntax and I can just use 0.1.0 which will work without all the extras? TIA, Kevin _______________________________________________ freebsd-ports(a)freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscribe(a)freebsd.org"
From: Greg Larkin on 7 Dec 2009 14:03 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Kevin Golding wrote: > I've had a bit of a poke around and no real joy in figuring this out so > let's see just how obvious the thing I'm missing is. > > I'm trying to create a new port and I'm getting in a tangle with the > version number. Basically, the author of this software has given it a > version number 0.1_0 which is incompatible with ports. Never fear! I > simply set the port version to 0.1.0 which is. Now this wasn't too bad > to deal with, I set "DISTNAME= ${PORTNAME}-0.1-0" to make it fetch > just fine (yes, despite the version being 0.1_0 the tarball is 0.1-0). > > All well and good at the early stages. This is where it gets > Pythonesque, and eventually problematic. > > Because of the version number I've also set: > > PYEASYINSTALL_EGG= ${PYDISTUTILS_PKGNAME:C/[^A-Za-z0-9.]+/_/g}-0.1_ > 0-${PYTHON_VERSION:S/thon//}${PYEASYINSTALL_OSARCH}.egg > > This makes installing work. > > Uninstalling fails with: > > pkg_delete: unexec command for '/usr/local/bin/easy_install-2.6 -q -m -S > /usr/local/lib/python2.6/site-packages -d usr/local/lib/python2.6/site- > packages -s /usr/local/bin django-signals-ahoy==0.1.0' failed > > So because ports installed 0.1.0 and the author wrote 0.1_0 is fails. > > I did look at setting PYEASYINSTALL_UNINSTALLARGS but I must confess my > attempts to turn PYDISTUTILS_PKGVERSION into 0.1_0 have so far failed > (as in, apparently my regex has changed nothing). > > Which brings me to my question (or questions). > > a) Can anyone point me in the right direction for making the > easy_install uninstall properly? > > or > > b) Should I simply change the version in the distfile so that is uses > more standard syntax and I can just use 0.1.0 which will work without > all the extras? > > TIA, > Kevin Hi Kevin, I've run into problems similar to this from time to time while creating and maintaining ports. Would you mind posting a link to or the contents of your Makefile so I can have a look at it? It's also useful to use "make -V <variable name>" to examine the values of any variable you're trying to debug, like PYDISTUTILS_PKGVERSION. I believe you can even use the colon modifiers (:S, :C, etc.) right on the command line so you can try different regexps easily. Regards, Greg - -- Greg Larkin http://www.FreeBSD.org/ - The Power To Serve http://www.sourcehosting.net/ - Ready. Set. Code. http://twitter.com/sourcehosting/ - Follow me, follow you -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iD8DBQFLHVFt0sRouByUApARAhtUAKCzUJDfqM8ahbpA+utA1hU5AUuzBwCfXqim ifmETG+YraAIuc+/YValWUY= =i0SW -----END PGP SIGNATURE----- _______________________________________________ freebsd-ports(a)freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscribe(a)freebsd.org"
From: Kevin Golding on 7 Dec 2009 14:17 In article <4B1D516D.2060209(a)FreeBSD.org>, Greg Larkin <glarkin(a)FreeBSD.org> writes >Kevin Golding wrote: >> I'm trying to create a new port and I'm getting in a tangle with the >> version number. Basically, the author of this software has given it a >> version number 0.1_0 which is incompatible with ports. Never fear! I >> simply set the port version to 0.1.0 which is. Now this wasn't too bad >> to deal with, I set "DISTNAME= ${PORTNAME}-0.1-0" to make it fetch >> just fine (yes, despite the version being 0.1_0 the tarball is 0.1-0). >> >> Because of the version number I've also set: >> >> PYEASYINSTALL_EGG= ${PYDISTUTILS_PKGNAME:C/[^A-Za-z0-9.]+/_/g}-0.1_ >> 0-${PYTHON_VERSION:S/thon//}${PYEASYINSTALL_OSARCH}.egg >> >> This makes installing work. >> >> Uninstalling fails with: >> >> pkg_delete: unexec command for '/usr/local/bin/easy_install-2.6 -q -m -S >> /usr/local/lib/python2.6/site-packages -d usr/local/lib/python2.6/site- >> packages -s /usr/local/bin django-signals-ahoy==0.1.0' failed >> >> So because ports installed 0.1.0 and the author wrote 0.1_0 is fails. >> >> I did look at setting PYEASYINSTALL_UNINSTALLARGS but I must confess my >> attempts to turn PYDISTUTILS_PKGVERSION into 0.1_0 have so far failed >> (as in, apparently my regex has changed nothing). >I've run into problems similar to this from time to time while creating >and maintaining ports. Would you mind posting a link to or the contents >of your Makefile so I can have a look at it? With pleasure (the whole port is there in fact): http://www.caomhin.org/ports/www/py-django-signals-ahoy/Makefile >It's also useful to use "make -V <variable name>" to examine the values >of any variable you're trying to debug, like PYDISTUTILS_PKGVERSION. I >believe you can even use the colon modifiers (:S, :C, etc.) right on the >command line so you can try different regexps easily. Ooh, now that sounds dangerously addictive. I shall give it a whirl and shout if I crack it. Kevin _______________________________________________ freebsd-ports(a)freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscribe(a)freebsd.org"
From: Greg Larkin on 7 Dec 2009 15:11 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Kevin Golding wrote: > In article <4B1D516D.2060209(a)FreeBSD.org>, Greg Larkin > <glarkin(a)FreeBSD.org> writes >> Kevin Golding wrote: >>> I'm trying to create a new port and I'm getting in a tangle with the >>> version number. Basically, the author of this software has given it a >>> version number 0.1_0 which is incompatible with ports. Never fear! I >>> simply set the port version to 0.1.0 which is. Now this wasn't too bad >>> to deal with, I set "DISTNAME= ${PORTNAME}-0.1-0" to make it fetch >>> just fine (yes, despite the version being 0.1_0 the tarball is 0.1-0). >>> >>> Because of the version number I've also set: >>> >>> PYEASYINSTALL_EGG= ${PYDISTUTILS_PKGNAME:C/[^A-Za-z0-9.]+/_/g}-0.1_ >>> 0-${PYTHON_VERSION:S/thon//}${PYEASYINSTALL_OSARCH}.egg >>> >>> This makes installing work. >>> >>> Uninstalling fails with: >>> >>> pkg_delete: unexec command for '/usr/local/bin/easy_install-2.6 -q -m -S >>> /usr/local/lib/python2.6/site-packages -d usr/local/lib/python2.6/site- >>> packages -s /usr/local/bin django-signals-ahoy==0.1.0' failed >>> >>> So because ports installed 0.1.0 and the author wrote 0.1_0 is fails. >>> >>> I did look at setting PYEASYINSTALL_UNINSTALLARGS but I must confess my >>> attempts to turn PYDISTUTILS_PKGVERSION into 0.1_0 have so far failed >>> (as in, apparently my regex has changed nothing). > >> I've run into problems similar to this from time to time while creating >> and maintaining ports. Would you mind posting a link to or the contents >> of your Makefile so I can have a look at it? > > With pleasure (the whole port is there in fact): > http://www.caomhin.org/ports/www/py-django-signals-ahoy/Makefile > >> It's also useful to use "make -V <variable name>" to examine the values >> of any variable you're trying to debug, like PYDISTUTILS_PKGVERSION. I >> believe you can even use the colon modifiers (:S, :C, etc.) right on the >> command line so you can try different regexps easily. > > Ooh, now that sounds dangerously addictive. I shall give it a whirl and > shout if I crack it. > > Kevin Hi Kevin, This might get you further: fbsd70# make -V \ PYDISTUTILS_PKGVERSION:C/\(\[\[:digit:\]\]\.\[\[:digit:\]\]\)\./\\1_/g 0.1_0 fbsd70# The :C modifier uses regexps as specified by re_format(7) (http://bit.ly/8CH8X1) instead of Perl regexps. Hope that helps, Greg - -- Greg Larkin http://www.FreeBSD.org/ - The Power To Serve http://www.sourcehosting.net/ - Ready. Set. Code. http://twitter.com/sourcehosting/ - Follow me, follow you -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iD8DBQFLHWF60sRouByUApARAuwHAJ9u/h3DzSZ1cOqGzRu3Y2K9jSFpawCfegsc p4QLS7fR3MNglymvWrsqh2M= =83xv -----END PGP SIGNATURE----- _______________________________________________ freebsd-ports(a)freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscribe(a)freebsd.org"
From: Kevin Golding on 7 Dec 2009 15:47 In article <4B1D617A.6020303(a)FreeBSD.org>, Greg Larkin <glarkin(a)FreeBSD.org> writes >This might get you further: > >fbsd70# make -V \ >PYDISTUTILS_PKGVERSION:C/\(\[\[:digit:\]\]\.\[\[:digit:\]\]\)\./\\1_/g >0.1_0 >fbsd70# Well that does indeed work in that context, but I have no idea why it appears to do nothing in the Makefile. It seems completely unchanged: pkg_delete: unexec command for '/usr/local/bin/easy_install-2.6 -q -m -S /usr/local/lib/python2.6/site-packages django-signals-ahoy==0.1.0' failed I actually had to double check I did indeed update the correct file. A bit strange anyway. Kevin _______________________________________________ freebsd-ports(a)freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscribe(a)freebsd.org"
|
Next
|
Last
Pages: 1 2 Prev: FreeBSD Port: php5-5.2.11_1 upgrade path to 5.3.0/1 Next: FreeBSD Port: memcached-1.4.1 |