Power Supply from TODD Products Corp.
in [Design]
|
Prev: Protecting high impedance sections of PCB with metallic Sheets rather than metallic molds
Next: book on synchros/resolvers
From: Uwe Hercksen on 20 Apr 2010 03:19 legg schrieb: > On Mon, 19 Apr 2010 16:27:05 +0200, Uwe Hercksen > <hercksen(a)mew.uni-erlangen.de> wrote: > > >>Hello, >> >>i have here a defect power supply from TODD Products Corp. Brentwood, >>N.Y. Model MDT-164-2415R >>I would like to get some information about it, at least the output >>voltages and currents. Are there replacement types from other companies? >> >>Thanks a lot and bye > > > http://www.slpower.com/UserFiles/File/MDT220.pdf Hello, thank you, the best match there is the model MDT-164-2412R, but I got MDT-164-2415R. I guess there is an output with +15 V instead of +12 V, but what about the -12 V, is it -15 V or -12 V? Bye
From: Joerg on 20 Apr 2010 09:20
Uwe Hercksen wrote: > > > legg schrieb: >> On Mon, 19 Apr 2010 16:27:05 +0200, Uwe Hercksen >> <hercksen(a)mew.uni-erlangen.de> wrote: >> >> >>> Hello, >>> >>> i have here a defect power supply from TODD Products Corp. Brentwood, >>> N.Y. Model MDT-164-2415R >>> I would like to get some information about it, at least the output >>> voltages and currents. Are there replacement types from other companies? >>> >>> Thanks a lot and bye >> >> >> http://www.slpower.com/UserFiles/File/MDT220.pdf > > Hello, > > thank you, the best match there is the model MDT-164-2412R, but I got > MDT-164-2415R. I guess there is an output with +15 V instead of +12 V, > but what about the -12 V, is it -15 V or -12 V? > Probably -12V. However, many Condor supplies can be adjusted between 12V and 15V but you might have to crack through some sealing lacquer on a trimpot. Sometimes a way to find out is to measure and compare the resistors across the output because those set the feedback. Best to send an email to them or call if you want to be sure. -- Regards, Joerg http://www.analogconsultants.com/ "gmail" domain blocked because of excessive spam. Use another domain or send PM. |