From: seal20 on
TimPerry wrote:

> the F1 uses an 18.3 - 0 - 18.3 VAC??at?600?mA?if?thats?any?help

Thank you, does F1 really means "Spirit Folio 10?" ?

--
Seal20
http://www.newchumpchange.com
From: Pooh Bear on


seal20 wrote:

> TimPerry wrote:
>
> >> http://uk.farnell.com/jsp/endecaSearch/partDetail.jsp?SKU=4334474&N=401
> >>
> >> or
> >>
> >> http://fr.farnell.com/jsp/endecaSearch/partDetail.jsp?SKU=3068638&N=0
> >>
> >> Graham
> >>
> >
> > the soundcraft part number is 952866 for the 115 VAC version
>
> thank you all for your interest ...
> well, as the soundcraft website doesn't give me choice "Spirit Folio 10?",
> I'm really not sure about the PSU's part number for Europe.

You can get that from Soundcraft's service centre in the UK.

I had a full service manual for the original Folio series at a company I used
to work for, that listed every single part. We had quite a few Spirit Folios
and had to maintain them from time to time. Ppl were forever breaking
something or other, usually snapping pot shafts, losing the twist on(off) nuts
on the jack sockets or letting coffee get in through fader slots. One wall
wart needed replacing simply because someone carelessly kicked it - a good
reason why you shouldn't have a 'wart' sticking out of a wall socket or mains
block - they are simply too vulnerable. Give me an internal psu any day.

Graham

From: Phildo on

"seal20" <swiller2k4(a)free.fr_evidement> wrote in message
news:434e9271$0$22544$626a14ce(a)news.free.fr...
> Tim Scott wrote:
>
>> Do Soundcraft/Spirit not have a spares/replacements service/shop type
>> thing, and are the manuals not downloadable from the website?
>
> I have already cheked the website, there is no manual for the Spirit folio
> 10-2 and concerning the part number the price of the new PSU is more
> expensive that the console. :o/
>
> so I try to find another way ...
>
Send it back to the guy you bought it from and get a new Behringer. It
wasn't "missing a cable", it is missing the power supply so it unusable.
It's like selling a car saying it is missing a cable and when you get it you
find the engine is missing. You got conned.

OK, the EQ on the Behringer is not as warm as on the soundcraft but you get
great customer support, it sounds good, the build is as good as the folio
and it is dirt cheap.

Phildo



From: TimPerry on

>
> > the F1 uses an 18.3 - 0 - 18.3 VAC at 600 mA if thats any help
>
> Thank you, does F1 really means "Spirit Folio 10?" ?
>
>

well it says spirit folio F1 in big letters fader 100 in little letters and
16^2 in a circle.

it a nice clean sounding mixer, light weight with long faders. i hope you
get your working... at the worst case four 9 volters with the outputs in
series should work.

im assuming you know how to wire for center tapped operation and that the
windings will have to be wired in correct polarity for it to function
correctly.