Prev: HP Color Laser Jet 1600 red cartridge problem
Next: Should I buy HP Photosmart? Or HP OfficeJet?
From: Alain191 on 18 May 2010 18:50
Warren Block <wblock(a)wonkity.com> wrote:
> Alain191 <alain(a)alussinan.org> wrote:

> > I made theses exp�rimentations with a cable wich works properly with an
> > other printer,
>
> That almost has to be a crossover (unless the other printer is
> auto-crossover or configured that way). Still, the cable should be
> clearly marked. (One way to tell: look at the colored wires in the
> clear parts of the connectors. On a normal cable, the wires will be in
> the same order on both connectors. On a crossover cable, the wires will
> be in different orders.)

It is a straignt cable.

> > I'm not sure this happens here because an other printer works without
> > troubles, an HP 8150 witn a JetDirect615n internal server, without any
> > change in the system configuration,
>
> That's good, because it can tell you what you need to know about
> configuring the Lexmark. Print a self-test page on the HP and find the
> IP address and netmask.

Here is the EIO 1 - Page JetDirect
+++ begin of quote
--Configuration HP JetDirect--
Etat: Carte E/S prete
Numero de Modele: J5067A
Adresse materiel: 0001E6B19ABC
Vers.micrologiciel: R.25.09
LAA: 0001E6B19ABC
Configuration port: 100TX FULL
Auto-negociation: Oui
ID du fabricant: 22014344902201
Date de fabrication: 11/2003

--Parametres de securite--
Mot de passe Admi. Non specifie
Web securise: HTTPS facultatif
Date expiration certif: 2008-11-01 00:00
Version de SNMP: 1/2
Def non appart SNMP: Non specifie
Liste d'acces: Non specifie

--Statistiques reseau--
Total des paquets re�us: 468
Paquets Unicast re�us: 408
Mauvais paquets re�us: 0
Erreurs trame re�us: 0
Total des paquets transmis: 446
Paquets intransmissibles: 0
Collisions: 0
Collisions tardives: 0

---TCP/IP---
Nom d'Hote: NPIB19ABC
Adresse IP: 192.168.1.151
Masque de sous-reseau: 255.255.255.0
Passerelle par defaut: 192.168.1.1
Config. par: Manuelle
Serveur BOOTP/DHCP: Non specifie
Serveur TFTP: Non specifie
Fichier de configuration: Non specifie
Nom de domaine: Non specifie
Server DNS: 212.27.54.252
Server WINS: Non specifie
Delai d'inactivite: 270 sec
URL de Web JetAdmin: Non specifie

Nom de service mDNS:
HP LaserJet 8150 Series (0001E6B19ABC)

There are also others headings :
--IPX/SPX--
--Novell/Netware--
--Apple Talk--
--DLC/LLC--

If you need it, I'll give you these details.

> Also, find the IP address and netmask of your computer. How to do that
> depends on the operating system.

It is macOSX 10.6.3

May be this image is good for you :
<http://cjoint.com/?ftaOSMuVWs>

Also there is :
ID Ethernet : 00:1f:f3:45:e3:f7

> >> If this doesn't solve your problem, please provide details on how the
> >> printer and computer are connected, switches or routers, IP addresses
> >> and netmasks.
> >
> > The connection is direct, without swich or router, during theses tests I
> > disconect my adsl modem, I use the IP adress which is given by the
> > configuration page of the printer and I have to learn about netmask...
> > this is not my domain and I understand that I have to learn it.
> >
> > The test page printed by the Optra under Axix direction gives :
> > ++++++begining of quote
> > Power-on time : 0 days, 0 hours, 3 minutes
> > Ethernet Auto Negotiation: Link down
>
> That says your cable is not talking.
>
> > Node address: 00:40:8C:58:01:60
> >
> > TCP/IP: enabled
> > Internet address Default router Net mask
> > 10.3.114.45 <automatic router sensing>
>
> That's an odd IP address, and the netmask isn't shown. Is this a used
> printer?
>
> Finally, an example:
>
> Computer: 192.168.1.50 netmask 255.255.255.0
> crossover cable to printer
> Printer: 192.168.1.250 netmask 255.255.255.0

If you need others informations, I'll give you.

Thanks a lot.

Alain
From: Warren Block on 19 May 2010 00:12
Alain191 <alain(a)alussinan.org> wrote:
>
> Here is the EIO 1 - Page JetDirect
> +++ begin of quote
....
> ---TCP/IP---
> Nom d'Hote: NPIB19ABC
> Adresse IP: 192.168.1.151
> Masque de sous-reseau: 255.255.255.0
> Passerelle par defaut: 192.168.1.1
> Config. par: Manuelle

Your computer address is a Proxad address, which won't apply when the
computer isn't hooked to your ISP. Maybe Macs default to 192.168.1.x
when no DHCP server is found.

The JetDirect, which works, is manually configured to 192.168.1.151.

Based on that, configure your Lexmark to 192.168.1.172 with a netmask of
255.255.255.0. The .172 is arbitrary, but since you only have three
devices we can be pretty sure it won't already be used.

--
Warren Block * Rapid City, South Dakota * USA
From: Alain191 on 19 May 2010 19:21
Warren Block <wblock(a)wonkity.com> wrote:

> Alain191 <alain(a)alussinan.org> wrote:
> >
> > Here is the EIO 1 - Page JetDirect
> > +++ begin of quote
> ...
> > ---TCP/IP---
> > Nom d'Hote: NPIB19ABC
> > Adresse IP: 192.168.1.151
> > Masque de sous-reseau: 255.255.255.0
> > Passerelle par defaut: 192.168.1.1
> > Config. par: Manuelle
>
> Your computer address is a Proxad address, which won't apply when the
> computer isn't hooked to your ISP. Maybe Macs default to 192.168.1.x
> when no DHCP server is found.
>
> The JetDirect, which works, is manually configured to 192.168.1.151.
>
> Based on that, configure your Lexmark to 192.168.1.172 with a netmask of
> 255.255.255.0. The .172 is arbitrary, but since you only have three
> devices we can be pretty sure it won't already be used.

When I try to print a test page, there is the same message as before :

probl�me r�versible : l'h�te du r�seau � 192.168.1.172 � est occup� ;
nouvel essai dans 5 secondes...

When I ping this address, the reply is :
ping: sendto: No route to host

For this evening, it is not good... and I vill leave hoe for few days,
I'll be back next tuesday et go on testing.

Thanks for your help.

Alain
First  |  Prev  | 
Pages: 1 2
Prev: HP Color Laser Jet 1600 red cartridge problem
Next: Should I buy HP Photosmart? Or HP OfficeJet?