Prev: Advent tv
Next: Sony Manuals Service Manuals
From: pink on 6 Jul 2005 10:45
How should I disconnect the main HV wire w/o zapping myself?

From: kip on 6 Jul 2005 11:48
Just pull it out...It wont bite.

kip
"pink" <dapinkie(a)gmail.com> wrote in message
news:1120661126.093801.268800(a)g14g2000cwa.googlegroups.com...
> How should I disconnect the main HV wire w/o zapping myself?
>


From: pink on 9 Jul 2005 16:55
Okay - with the main HV lead disconnected from the HV divider block,
the sound returns.

With the HV lead reconnected, and disconnecting each individual CRT
wire in sequence, no sound again (except for the tick-tick-tick). Then
I disconnected all three CRT leads (in case two anodes were bad) and
still no sound.

So - replace the HV divider block?

From: dkuhajda on 9 Jul 2005 17:27
And repair the main smps power supply which is the typical cause of the
hv block failure.
Do not forget the hv splitter rubber insulation boots that are on all
the wires.

From: pink on 9 Jul 2005 18:57
Would installing Tritronic's Common Failure Repair Kit (p/n
CTC169-KIT-PTV) do the trick?

First  |  Prev  |  Next  |  Last
Pages: 1 2 3 4
Prev: Advent tv
Next: Sony Manuals Service Manuals