From: Mike Rapoport on 28 Apr 2010 11:40 Graeme Russ wrote: > Hi All, > > I've been working for a while now getting the x86 U-Boot port up to speed > to boot a linux kernel > > I now have a root fs (build from Linux-From-Scratch and trimmed to <15M > using qemu) but all attempts to get any serial console output past > launching of init have failed. > > I have taken the root fs which successfully boots using qemu and created a > jffs2 image and flashed it onto one of the on-board flash chips. U-Boot can > successfully 'ls' the root fs > > My bootags are: > > root=/dev/mtdblock1 rw rootfstype=jffs2 console=ttyS0,115200 > > as Linux can mount the root partition: > [ 1.447819] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ snip ] > [ 1.911896] Write protecting the kernel read-only data: 596k > [ 1.915842] kernel_execve(/sbin/init) > > (I've added a printk in kernel_execve() which gives me the last line) > > I initially had hot-plug support compiled into the kernel and was getting > a lot of kernel_execve(/sbin/hotplug) messages as well (plus a udev: > starting version 151 message which appear 100+ seconds and the above > messages), but I have since removed that and used mknod to create > /dev/ttyS0 directly > > I have also tried the following test script: > > #!/bin/bash > stty -F /dev/ttyS0 115200 > cat hello > /dev/ttyS0 > > but still no luck > > Does anyone have any advise on how I can debug this problem? Have you tried with init=/bin/sh? Also, make sure you have /dev/null and /dev/console nodes. > > Regards, > > Graeme > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo(a)vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Sincerely yours, Mike. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|
Pages: 1 Prev: cocbalt_lcdfb: correct sections Next: [BUGFIX] kprobes/x86: Fix removed int3 checking order |