Prev: Companyweb has gone missing from SBS 2008 Standard SP2, Sharepoint
Next: SBS 2008 Backup (mirror server?)
From: AC on 13 Jul 2010 14:45 Hi all, The document "Windows Small Business Server 2008 Migrate to Windows Small Business Server 2008 from Windows Small Business Server 2003 " Version: 5 States on page 11 of "Verify the network configuration..." page: "ensure that the IP address on the network adapter that is in the router and that connects to your LAN is set to either 192.169.x.1 or 192.168.x.254, where x is a number from 1 to 254." Does this really mean '0' cannot be used and that the standard 192.168.0.1 - 254 'c' class network is no longer acceptable? Could anyone confirm zero's are ok in 2008 ip addressing? Thanks
From: Larry Struckmeyer[SBS-MVP] on 13 Jul 2010 16:03
Hi AC: I prefer not to use either 0 or 1, as many home systems use these for the third octet. You can use any number you like from 0 to 255, but 0, 1, 254, and 255 are all best avoided. I still use 16 because I am a holdover from prior versions. There is no "standard" for a Class C subnet, except that it starts 192.168 in order to be non routable. There are others, some in the 10. range and some in the 172. range. http://en.wikipedia.org/wiki/Non-routable_ip_address -Larry -Please post the resolution to your issue so others may benefit. -Get Your SBS Health Check at www.sbsbpa.com > Hi all, > > The document "Windows Small Business Server 2008 Migrate to Windows > Small Business Server 2008 from Windows Small Business Server 2003 " > Version: 5 > > States on page 11 of "Verify the network configuration..." page: > > "ensure that the IP address on the network adapter that is in the > router and that connects to your LAN is set to either 192.169.x.1 or > 192.168.x.254, where x is a number from 1 to 254." > > Does this really mean '0' cannot be used and that the standard > 192.168.0.1 - 254 'c' class network is no longer acceptable? > > Could anyone confirm zero's are ok in 2008 ip addressing? > > Thanks > |