From: RGR-74 on 24 Nov 2009 04:35 Hello everyone, I have a problem,few days ago, I have to be repaired an interface called PC Acq. Mod DM302 manufactured by SPEX; This card receives a signal from an optical part (which is directly connected to a polarizer) and sends its output signal to the polarizer (thus creating a feedback) some days no longer works; The question is: anyone has any information on this card (DM302 manufactured by SPEX) for example, wiring diagrams and user manual. Thanks to all Joseph www.baab.it/ik2umd/
From: Hans-Christian Becker on 24 Nov 2009 04:22 In article <ce0948e3-cc39-45ac-9b74-966693b73451(a)r31g2000vbi.googlegroups.com>, RGR-74 <romano_74(a)libero.it> wrote: >Hello everyone, >I have a problem,few days ago, I have to be repaired >an interface called PC Acq. Mod DM302 manufactured by SPEX; >This card receives a signal from an optical part (which is directly >connected to a polarizer) and sends its output signal to the polarizer >(thus creating a feedback) some days no longer works; >The question is: anyone has any information on this card (DM302 >manufactured by SPEX) for example, wiring diagrams and user manual. I don't have schematics for the DM302, but I do know that it is a preamplifier and discriminator for photon counting. Have you tried to contact Spex/Jobin-Yvon? -- Dr. Hans-Christian Becker '96 VN750 SM5TLH KG6POK Uppsala, Sweden
From: RGR-74 on 24 Nov 2009 08:36 On 24 Nov, 10:22, h...(a)fki030.fki.uu.se (Hans-Christian Becker) wrote: > In article <ce0948e3-cc39-45ac-9b74-966693b73...(a)r31g2000vbi.googlegroups..com>, > > RGR-74 <romano...(a)libero.it> wrote: > >Hello everyone, > >I have a problem,few days ago, I have to be repaired > >an interface called PC Acq. Mod DM302 manufactured by SPEX; > >This card receives a signal from an optical part (which is directly > >connected to a polarizer) and sends its output signal to the polarizer > >(thus creating a feedback) some days no longer works; > >The question is: anyone has any information on this card (DM302 > >manufactured by SPEX) for example, wiring diagrams and user manual. > > I don't have schematics for the DM302, but I do know that it is a > preamplifier and discriminator for photon counting. Have you tried to > contact Spex/Jobin-Yvon? > > -- > Dr. Hans-Christian Becker > '96 VN750 SM5TLH KG6POK > Uppsala, Sweden Hello Hans, I tried to contact the Spex, but I have not any response, Unfortunately the documentation of this interface has been lost; At this point I will make other checks and later I expand to other control devices. Thanks again Joseph
From: Hans-Christian Becker on 24 Nov 2009 08:47 In article <02b23405-29ed-42bc-ae52-1f8975657955(a)e31g2000vbm.googlegroups.com>, RGR-74 <romano_74(a)libero.it> wrote: >I tried to contact the Spex, but I have not any response, I am not surprised ... >Unfortunately the documentation of this interface has been lost; >At this point I will make other checks and later I expand to other >control devices. The input (at least in the configurations I have seen) takes pulses from a photomultiplier operating in photon counting mode. The discriminator then removes virtually all "dark" counts, and the output should (I think) be pulses of uniform height that are fed to a counter. Good luck, Hans -- Dr. Hans-Christian Becker '96 VN750 SM5TLH KG6POK Uppsala, Sweden
|
Pages: 1 Prev: Schematic for Sorensen PTM 15-3.5 linear power supply Next: Crotech Model 3305 |