Prev: periodic dust cleaning
Next: Linksys WRTP54G-VR
From: Petrus Tax on 18 Mar 2010 11:40
Greetings!
Somebody gave me an older computer with a brandless Mobo, which I would like
to pass on to somebody who needs one. It works fine under Windows 2000
Professional, except that it doesn't turn off when it should. Even if you
push the "On" button when the monitor says: "It is now safe to turn off your
computer", it doesn't do anything. One can only unplug the computer or flip
the switch on a powerstrip (if one has one).
Is there any trick that would make the computer do the job? I looked into
the Award BIOS, but didn't see anything on shutting down there.
Many thanks in advance!
Petrus


From: kony on 18 Mar 2010 12:00
On Thu, 18 Mar 2010 11:40:00 -0400, "Petrus Tax"
<petrustax(a)earthlink.net> wrote:

>Greetings!
>Somebody gave me an older computer with a brandless Mobo, which I would like
>to pass on to somebody who needs one. It works fine under Windows 2000
>Professional, except that it doesn't turn off when it should. Even if you
>push the "On" button when the monitor says: "It is now safe to turn off your
>computer", it doesn't do anything. One can only unplug the computer or flip
>the switch on a powerstrip (if one has one).
>Is there any trick that would make the computer do the job? I looked into
>the Award BIOS, but didn't see anything on shutting down there.
>Many thanks in advance!
>Petrus
>


Did you try holding the switch in for 4-5 seconds?

Had the system previously worked ok and what has changed
since then?

You might note where the switch leads are connected, unplug
it and substitute another switch or short the two pins
together with a screwdriver/etc tip to see if that works...
might be a dodgy switch.
From: Petrus Tax on 18 Mar 2010 14:16
Hello kony,

many thanks for your pronto reply. Holding the "On" button for several
seconds did the trick. I must still be too impatient at my ripe age! :)

Petrus

"kony" <spam(a)spam.com> wrote in message
news:sbj4q558dfu15k1orbqt1glks54kvadrno(a)4ax.com...
> On Thu, 18 Mar 2010 11:40:00 -0400, "Petrus Tax"
> <petrustax(a)earthlink.net> wrote:
>
>>Greetings!
>>Somebody gave me an older computer with a brandless Mobo, which I would
>>like
>>to pass on to somebody who needs one. It works fine under Windows 2000
>>Professional, except that it doesn't turn off when it should. Even if you
>>push the "On" button when the monitor says: "It is now safe to turn off
>>your
>>computer", it doesn't do anything. One can only unplug the computer or
>>flip
>>the switch on a powerstrip (if one has one).
>>Is there any trick that would make the computer do the job? I looked into
>>the Award BIOS, but didn't see anything on shutting down there.
>>Many thanks in advance!
>>Petrus
>>
>
>
> Did you try holding the switch in for 4-5 seconds?
>
> Had the system previously worked ok and what has changed
> since then?
>
> You might note where the switch leads are connected, unplug
> it and substitute another switch or short the two pins
> together with a screwdriver/etc tip to see if that works...
> might be a dodgy switch.


 | 
Pages: 1
Prev: periodic dust cleaning
Next: Linksys WRTP54G-VR