Prev: pcmcia parallel port emulator
Next: error with xmlread
From: Di Pi on 7 Jan 2010 09:03
Hello!
I've just created the Boost Type Power Factor Corrector, using SIMSCAPE/SIMElectronics blocks! I had to use this Toolbox not the SymPowerSystem as the latter doesn't provide the possibility to define precise parasitic parameters of switching devices.
The control is implemented by means of general Simulink blocks. After creating the model, I've added the Solver configuration block and connected it to the ground. As I launch the simulation the following error appears:

--Data type Mismatch. Input port.../Solver Configuration/EVAL KEY/SFUN INPUTS expects a signal of data type 'double' . However it is driven by a signal of data type 'boolean'.--

Any ideas?
Waiting for reply and help!
THANKS in ADVANCE!
From: Arnaud Miege on 20 Jan 2010 11:57
"Di Pi" <Pretender04(a)inbox.lv> wrote in message <hi4pio$art$1(a)fred.mathworks.com>...
> Hello!
> I've just created the Boost Type Power Factor Corrector, using SIMSCAPE/SIMElectronics blocks! I had to use this Toolbox not the SymPowerSystem as the latter doesn't provide the possibility to define precise parasitic parameters of switching devices.
> The control is implemented by means of general Simulink blocks. After creating the model, I've added the Solver configuration block and connected it to the ground. As I launch the simulation the following error appears:
>
> --Data type Mismatch. Input port.../Solver Configuration/EVAL KEY/SFUN INPUTS expects a signal of data type 'double' . However it is driven by a signal of data type 'boolean'.--
>
> Any ideas?
> Waiting for reply and help!
> THANKS in ADVANCE!

I have never seen this before. Are you sure you connected everything correctly? Can you post your model or at least a screenshot on a file sharing site?

Arnaud
 | 
Pages: 1
Prev: pcmcia parallel port emulator
Next: error with xmlread