Prev: PDF of SMD device codes and markings with pictures
Next: Marshall Master Lead combo, 1978
From: bill on 21 Jun 2010 09:18
If anybody is still listening - THANKS for all your help

I finally got the flyback and put everything back and it works
perfectly.

No there parts needed, 'cept the fuse.



On Wed, 28 Apr 2010 10:21:00 -0400, bill(a)love.ranch wrote:

>Sony KV-2784R died - horiz collapse - fuse F501 blown - pressing power
>button causes TV to try to start then stops - very soft high freq buzz
>is heard. Remote control will not start it. HOT and all diodes in area
>test OK with ohmmeter. Fuse is somewhat blackened at end where it
>seperated, so it wasn't a slight overload. I do not have schematics.
>Is there any history of common component failures here.Just for ref, I
>am very technical and had a repair shop in the 80's - this was built
>11/86 - just after I closed the shop. So speak to me at that level,
>thx.
From: Chuck on 22 Jun 2010 10:29
On Mon, 21 Jun 2010 09:18:15 -0400, bill(a)love.ranch wrote:

>If anybody is still listening - THANKS for all your help
>
>I finally got the flyback and put everything back and it works
>perfectly.
>
>No there parts needed, 'cept the fuse.
>
>
>
>On Wed, 28 Apr 2010 10:21:00 -0400, bill(a)love.ranch wrote:
>
>>Sony KV-2784R died - horiz collapse - fuse F501 blown - pressing power
>>button causes TV to try to start then stops - very soft high freq buzz
>>is heard. Remote control will not start it. HOT and all diodes in area
>>test OK with ohmmeter. Fuse is somewhat blackened at end where it
>>seperated, so it wasn't a slight overload. I do not have schematics.
>>Is there any history of common component failures here.Just for ref, I
>>am very technical and had a repair shop in the 80's - this was built
>>11/86 - just after I closed the shop. So speak to me at that level,
>>thx.

You are welcome. Chuck
 | 
Pages: 1
Prev: PDF of SMD device codes and markings with pictures
Next: Marshall Master Lead combo, 1978