Speech recognition doesent starts
in [Tablet PC]
|
Prev: WinXP Pro to TabletPC
Next: english language version
From: Chris H. on 28 Aug 2006 17:32 You cannot have two "microphones" selected and in operation at the same time. You need to go into Control Panel/Sounds and Audio Devices/Voice tab and make a selection of the proper device under Voice Recording, then Test Hardware.... -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "avi" <avi(a)discussions.microsoft.com> wrote in message news:0AB9E9D5-4FF5-43E2-82BE-8E262D820271(a)microsoft.com... >i have a logitech USB headset with microphone and also logitech webcam with > build-in microphone.... both of them are working good in "sound > recorder"... > and i tried the Configure Microphone option... and i get the same > message.. > but again... the microphones work great in "sound recorder" and i updated > all > the drivers... so i dont know what is the problem... (i wanna use the > Speech > recognition so badly... please help) > > > "Chris H." wrote: > >> Which Tablet PC are you on? Do you have an external voice-enable >> microphone, or are you using the internal, built-in mic? In Control >> Panel/Speech, have you used the Configure Microphone button on the Speech >> Recognition tab? >> -- >> Chris H. >> Microsoft Windows MVP/Tablet PC >> Tablet Creations - http://nicecreations.us/ >> Associate Expert >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> "avi" <avi(a)discussions.microsoft.com> wrote in message >> news:F9A61A6B-8EB9-4D53-A58A-938BAC05AB6D(a)microsoft.com... >> >i know that and its ok.. i mean, i tried the "sound recorder" and >> >everything >> > is fine.. and its still say's this when i press start speech >> > recognition: >> > "make sure that your audio hardware is working properly and checky your >> > audio configuration in the audio devices and sound themes control >> > panel" >> > >> > "terri" wrote: >> > >> >> You probably need to check the microphone. Look in the control panel >> >> under >> >> Sounds and then click the Recording tab to check the mic. >> >> -- >> >> Terri Stratton >> >> http://thetabletpc.net >> >> Microsoft Featured Community >> >> Microsoft Windows MVP - Tablet PC >> >> Visit our site for Origami PCs - http://writepc.com >> >> >> >> "avi" <avi(a)discussions.microsoft.com> wrote in message >> >> news:B2D8A091-D3FD-469C-8919-8570D977770C(a)microsoft.com... >> >> > when i click on "start Speech recognition" i get an error message >> >> > "the wizard could not start" and it say's something about making >> >> > sure >> >> > that >> >> > my audio hardware is working good and the check my audio >> >> > configuration... >> >> > >> >> > but the this is... my speakers are fine.. and the sound is >> >> > perfect... >> >> > can >> >> > anyone help? >> >> > >> >> >> >> >>
From: avi on 28 Aug 2006 17:39 i trired both... i tried 1 at a time.. tried everything and i get the error message... please help "Chris H." wrote: > You cannot have two "microphones" selected and in operation at the same > time. You need to go into Control Panel/Sounds and Audio Devices/Voice tab > and make a selection of the proper device under Voice Recording, then Test > Hardware.... > -- > Chris H. > Microsoft Windows MVP/Tablet PC > Tablet Creations - http://nicecreations.us/ > Associate Expert > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > "avi" <avi(a)discussions.microsoft.com> wrote in message > news:0AB9E9D5-4FF5-43E2-82BE-8E262D820271(a)microsoft.com... > >i have a logitech USB headset with microphone and also logitech webcam with > > build-in microphone.... both of them are working good in "sound > > recorder"... > > and i tried the Configure Microphone option... and i get the same > > message.. > > but again... the microphones work great in "sound recorder" and i updated > > all > > the drivers... so i dont know what is the problem... (i wanna use the > > Speech > > recognition so badly... please help) > > > > > > "Chris H." wrote: > > > >> Which Tablet PC are you on? Do you have an external voice-enable > >> microphone, or are you using the internal, built-in mic? In Control > >> Panel/Speech, have you used the Configure Microphone button on the Speech > >> Recognition tab? > >> -- > >> Chris H. > >> Microsoft Windows MVP/Tablet PC > >> Tablet Creations - http://nicecreations.us/ > >> Associate Expert > >> Expert Zone - www.microsoft.com/windowsxp/expertzone > >> > >> > >> "avi" <avi(a)discussions.microsoft.com> wrote in message > >> news:F9A61A6B-8EB9-4D53-A58A-938BAC05AB6D(a)microsoft.com... > >> >i know that and its ok.. i mean, i tried the "sound recorder" and > >> >everything > >> > is fine.. and its still say's this when i press start speech > >> > recognition: > >> > "make sure that your audio hardware is working properly and checky your > >> > audio configuration in the audio devices and sound themes control > >> > panel" > >> > > >> > "terri" wrote: > >> > > >> >> You probably need to check the microphone. Look in the control panel > >> >> under > >> >> Sounds and then click the Recording tab to check the mic. > >> >> -- > >> >> Terri Stratton > >> >> http://thetabletpc.net > >> >> Microsoft Featured Community > >> >> Microsoft Windows MVP - Tablet PC > >> >> Visit our site for Origami PCs - http://writepc.com > >> >> > >> >> "avi" <avi(a)discussions.microsoft.com> wrote in message > >> >> news:B2D8A091-D3FD-469C-8919-8570D977770C(a)microsoft.com... > >> >> > when i click on "start Speech recognition" i get an error message > >> >> > "the wizard could not start" and it say's something about making > >> >> > sure > >> >> > that > >> >> > my audio hardware is working good and the check my audio > >> >> > configuration... > >> >> > > >> >> > but the this is... my speakers are fine.. and the sound is > >> >> > perfect... > >> >> > can > >> >> > anyone help? > >> >> > > >> >> > >> > >> > >> > > >
From: avi on 28 Aug 2006 17:47 > i trired both... i tried 1 at a time.. tried everything and i get the error > message... please help! here's a link for a pic... what you can see the devices.. i tried every one of them alone as a defult bot nothing worked... http://f5.putfile.com/main/8/23917415843.jpg > > "Chris H." wrote: > > > You cannot have two "microphones" selected and in operation at the same > > time. You need to go into Control Panel/Sounds and Audio Devices/Voice tab > > and make a selection of the proper device under Voice Recording, then Test > > Hardware.... > > -- > > Chris H. > > Microsoft Windows MVP/Tablet PC > > Tablet Creations - http://nicecreations.us/ > > Associate Expert > > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > > > > "avi" <avi(a)discussions.microsoft.com> wrote in message > > news:0AB9E9D5-4FF5-43E2-82BE-8E262D820271(a)microsoft.com... > > >i have a logitech USB headset with microphone and also logitech webcam with > > > build-in microphone.... both of them are working good in "sound > > > recorder"... > > > and i tried the Configure Microphone option... and i get the same > > > message.. > > > but again... the microphones work great in "sound recorder" and i updated > > > all > > > the drivers... so i dont know what is the problem... (i wanna use the > > > Speech > > > recognition so badly... please help) > > > > > > > > > "Chris H." wrote: > > > > > >> Which Tablet PC are you on? Do you have an external voice-enable > > >> microphone, or are you using the internal, built-in mic? In Control > > >> Panel/Speech, have you used the Configure Microphone button on the Speech > > >> Recognition tab? > > >> -- > > >> Chris H. > > >> Microsoft Windows MVP/Tablet PC > > >> Tablet Creations - http://nicecreations.us/ > > >> Associate Expert > > >> Expert Zone - www.microsoft.com/windowsxp/expertzone > > >> > > >> > > >> "avi" <avi(a)discussions.microsoft.com> wrote in message > > >> news:F9A61A6B-8EB9-4D53-A58A-938BAC05AB6D(a)microsoft.com... > > >> >i know that and its ok.. i mean, i tried the "sound recorder" and > > >> >everything > > >> > is fine.. and its still say's this when i press start speech > > >> > recognition: > > >> > "make sure that your audio hardware is working properly and checky your > > >> > audio configuration in the audio devices and sound themes control > > >> > panel" > > >> > > > >> > "terri" wrote: > > >> > > > >> >> You probably need to check the microphone. Look in the control panel > > >> >> under > > >> >> Sounds and then click the Recording tab to check the mic. > > >> >> -- > > >> >> Terri Stratton > > >> >> http://thetabletpc.net > > >> >> Microsoft Featured Community > > >> >> Microsoft Windows MVP - Tablet PC > > >> >> Visit our site for Origami PCs - http://writepc.com > > >> >> > > >> >> "avi" <avi(a)discussions.microsoft.com> wrote in message > > >> >> news:B2D8A091-D3FD-469C-8919-8570D977770C(a)microsoft.com... > > >> >> > when i click on "start Speech recognition" i get an error message > > >> >> > "the wizard could not start" and it say's something about making > > >> >> > sure > > >> >> > that > > >> >> > my audio hardware is working good and the check my audio > > >> >> > configuration... > > >> >> > > > >> >> > but the this is... my speakers are fine.. and the sound is > > >> >> > perfect... > > >> >> > can > > >> >> > anyone help? > > >> >> > > > >> >> > > >> > > >> > > >> > > > > > >
From: Chris H. on 28 Aug 2006 19:12 Are you actually disabling one? There are settings in the properties of the devices which includes a "Line In" and Microphone. You need to be using one or the other, not both. If you can't get it working, I suggest you call the support section for your Tablet PC manufacturer and ask them to lead you through the setup while you've got them on the telephone. -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "avi" <avi(a)discussions.microsoft.com> wrote in message news:00D9ADE8-11C8-43A1-9CC2-E20533D77B2D(a)microsoft.com... >i trired both... i tried 1 at a time.. tried everything and i get the error > message... please help > > "Chris H." wrote: > >> You cannot have two "microphones" selected and in operation at the same >> time. You need to go into Control Panel/Sounds and Audio Devices/Voice >> tab >> and make a selection of the proper device under Voice Recording, then >> Test >> Hardware.... >> -- >> Chris H. >> Microsoft Windows MVP/Tablet PC >> Tablet Creations - http://nicecreations.us/ >> Associate Expert >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> "avi" <avi(a)discussions.microsoft.com> wrote in message >> news:0AB9E9D5-4FF5-43E2-82BE-8E262D820271(a)microsoft.com... >> >i have a logitech USB headset with microphone and also logitech webcam >> >with >> > build-in microphone.... both of them are working good in "sound >> > recorder"... >> > and i tried the Configure Microphone option... and i get the same >> > message.. >> > but again... the microphones work great in "sound recorder" and i >> > updated >> > all >> > the drivers... so i dont know what is the problem... (i wanna use the >> > Speech >> > recognition so badly... please help) >> > >> > >> > "Chris H." wrote: >> > >> >> Which Tablet PC are you on? Do you have an external voice-enable >> >> microphone, or are you using the internal, built-in mic? In Control >> >> Panel/Speech, have you used the Configure Microphone button on the >> >> Speech >> >> Recognition tab? >> >> -- >> >> Chris H. >> >> Microsoft Windows MVP/Tablet PC >> >> Tablet Creations - http://nicecreations.us/ >> >> Associate Expert >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> >> >> >> "avi" <avi(a)discussions.microsoft.com> wrote in message >> >> news:F9A61A6B-8EB9-4D53-A58A-938BAC05AB6D(a)microsoft.com... >> >> >i know that and its ok.. i mean, i tried the "sound recorder" and >> >> >everything >> >> > is fine.. and its still say's this when i press start speech >> >> > recognition: >> >> > "make sure that your audio hardware is working properly and checky >> >> > your >> >> > audio configuration in the audio devices and sound themes control >> >> > panel" >> >> > >> >> > "terri" wrote: >> >> > >> >> >> You probably need to check the microphone. Look in the control >> >> >> panel >> >> >> under >> >> >> Sounds and then click the Recording tab to check the mic. >> >> >> -- >> >> >> Terri Stratton >> >> >> http://thetabletpc.net >> >> >> Microsoft Featured Community >> >> >> Microsoft Windows MVP - Tablet PC >> >> >> Visit our site for Origami PCs - http://writepc.com >> >> >> >> >> >> "avi" <avi(a)discussions.microsoft.com> wrote in message >> >> >> news:B2D8A091-D3FD-469C-8919-8570D977770C(a)microsoft.com... >> >> >> > when i click on "start Speech recognition" i get an error message >> >> >> > "the wizard could not start" and it say's something about making >> >> >> > sure >> >> >> > that >> >> >> > my audio hardware is working good and the check my audio >> >> >> > configuration... >> >> >> > >> >> >> > but the this is... my speakers are fine.. and the sound is >> >> >> > perfect... >> >> >> > can >> >> >> > anyone help? >> >> >> > >> >> >> >> >> >> >> >> >> >> >> >>
From: avi on 28 Aug 2006 19:23
OK thanks I fix it and i love it :) i got it worked out by my self!!!!!! Chris H." wrote: > Are you actually disabling one? There are settings in the properties of the > devices which includes a "Line In" and Microphone. You need to be using one > or the other, not both. If you can't get it working, I suggest you call the > support section for your Tablet PC manufacturer and ask them to lead you > through the setup while you've got them on the telephone. > -- > Chris H. > Microsoft Windows MVP/Tablet PC > Tablet Creations - http://nicecreations.us/ > Associate Expert > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > "avi" <avi(a)discussions.microsoft.com> wrote in message > news:00D9ADE8-11C8-43A1-9CC2-E20533D77B2D(a)microsoft.com... > >i trired both... i tried 1 at a time.. tried everything and i get the error > > message... please help > > > > "Chris H." wrote: > > > >> You cannot have two "microphones" selected and in operation at the same > >> time. You need to go into Control Panel/Sounds and Audio Devices/Voice > >> tab > >> and make a selection of the proper device under Voice Recording, then > >> Test > >> Hardware.... > >> -- > >> Chris H. > >> Microsoft Windows MVP/Tablet PC > >> Tablet Creations - http://nicecreations.us/ > >> Associate Expert > >> Expert Zone - www.microsoft.com/windowsxp/expertzone > >> > >> > >> "avi" <avi(a)discussions.microsoft.com> wrote in message > >> news:0AB9E9D5-4FF5-43E2-82BE-8E262D820271(a)microsoft.com... > >> >i have a logitech USB headset with microphone and also logitech webcam > >> >with > >> > build-in microphone.... both of them are working good in "sound > >> > recorder"... > >> > and i tried the Configure Microphone option... and i get the same > >> > message.. > >> > but again... the microphones work great in "sound recorder" and i > >> > updated > >> > all > >> > the drivers... so i dont know what is the problem... (i wanna use the > >> > Speech > >> > recognition so badly... please help) > >> > > >> > > >> > "Chris H." wrote: > >> > > >> >> Which Tablet PC are you on? Do you have an external voice-enable > >> >> microphone, or are you using the internal, built-in mic? In Control > >> >> Panel/Speech, have you used the Configure Microphone button on the > >> >> Speech > >> >> Recognition tab? > >> >> -- > >> >> Chris H. > >> >> Microsoft Windows MVP/Tablet PC > >> >> Tablet Creations - http://nicecreations.us/ > >> >> Associate Expert > >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > >> >> > >> >> > >> >> "avi" <avi(a)discussions.microsoft.com> wrote in message > >> >> news:F9A61A6B-8EB9-4D53-A58A-938BAC05AB6D(a)microsoft.com... > >> >> >i know that and its ok.. i mean, i tried the "sound recorder" and > >> >> >everything > >> >> > is fine.. and its still say's this when i press start speech > >> >> > recognition: > >> >> > "make sure that your audio hardware is working properly and checky > >> >> > your > >> >> > audio configuration in the audio devices and sound themes control > >> >> > panel" > >> >> > > >> >> > "terri" wrote: > >> >> > > >> >> >> You probably need to check the microphone. Look in the control > >> >> >> panel > >> >> >> under > >> >> >> Sounds and then click the Recording tab to check the mic. > >> >> >> -- > >> >> >> Terri Stratton > >> >> >> http://thetabletpc.net > >> >> >> Microsoft Featured Community > >> >> >> Microsoft Windows MVP - Tablet PC > >> >> >> Visit our site for Origami PCs - http://writepc.com > >> >> >> > >> >> >> "avi" <avi(a)discussions.microsoft.com> wrote in message > >> >> >> news:B2D8A091-D3FD-469C-8919-8570D977770C(a)microsoft.com... > >> >> >> > when i click on "start Speech recognition" i get an error message > >> >> >> > "the wizard could not start" and it say's something about making > >> >> >> > sure > >> >> >> > that > >> >> >> > my audio hardware is working good and the check my audio > >> >> >> > configuration... > >> >> >> > > >> >> >> > but the this is... my speakers are fine.. and the sound is > >> >> >> > perfect... > >> >> >> > can > >> >> >> > anyone help? > >> >> >> > > >> >> >> > >> >> > >> >> > >> >> > >> > >> > >> > > > |