Prev: simer pump sss-11 electronic liquid level control switch
Next: Panasonic NV-VHD1 Error F498 WHY?
From: menkech on 8 May 2005 23:01
Brian,

I have the exact same TV with the exact same problem. Did you get it
fixed? What did you do? How much did it cost?

Thanks.

From: tom on 9 May 2005 23:59
You can swapt the blue and the red convergence connector yoke , the
problem will follow the red gun . It look like the convergence output of
blue gone.
"Art" <plotsligt(a)comcast.net> wrote in message
news:wpCdnWQzBLm66vjfRVn-3g(a)comcast.com...
> CPT Cathode Projection Tube, another anagram for Cathode Ray Tube
specifying
> it's application. If you indeed find evidence of leakage then you may just
> ask Samsung to send you the circuit boar that has the fluid on it as well
as
> the three tubes, unless you can determine just which one has actually
> leaked.
> "Bojangleslovin" <bmbouterNOSPAM(a)ncsu.edu> wrote in message
> news:H299e.12278$44.4935(a)newsread1.news.atl.earthlink.net...
> > Thanx for all the help so far! Just wondering but what is a CPT? What
if
> > I find leakage? I've ordered the service manual!
> >
> > Art wrote:
> >> Check for leakage from any one of the three cpt before going too far,
> >> then order the convergence output board, After replacing that item then
> >> do the required adjustments.
> >> "mark" <bk416(a)lafn.org> wrote in message
> >> news:d3vkak$pih$1(a)zook.lafn.org...
> >>
> >>> The manual will tell you how to adjust it, and if it doesn't the
> >>> problem
> >>>is in that part of the circuitry.
> >>>
> >>>
> >>>"Bojangleslovin" <bmbouterNOSPAM(a)ncsu.edu> wrote in message
> >>>news:MWC8e.11416$44.6220(a)newsread1.news.atl.earthlink.net...
> >>>
> >>>>I've got a Rear Projection Samsung HCM4215W who's blue gun is severely
> >>>>warped. See photographs here:
> >>>>
> >>>><http://www.hardwooddesigns.com/forsale/convergence.htm>
> >>>>
> >>>>I want to repair it (buying one is NOT an option). How can I
determine
> >>>>if the "blue" emmiter (gun) has failed or the circuitry behind it?
Under
> >>>>the TV's convergence setup, I can still make convergence modifications
> >>>>to blue, which behave properly, but its basic warped shape may not be
> >>>>modified. I found that samsung has a service manual for the TV that
> >>>>costs $20, is this going to help me w/ both diagnosis and repair?
Armed
> >>>>with a soldering iron and multimeter, I await advice. Thanks in
advance!
> >>>>
> >>>>Brian
> >>>
> >>>
> >>
>
>


First  |  Prev  | 
Pages: 1 2
Prev: simer pump sss-11 electronic liquid level control switch
Next: Panasonic NV-VHD1 Error F498 WHY?