From: George's Pro Sound Co. on

"JWald" <wldj4(a)grics.net> wrote in message
news:hkcftj02sp9(a)enews2.newsguy.com...
> "George's Pro Sound Co." <bmoas(a)yahoo.com> wrote in message
> news:c9udnTMhR4beJvTWnZ2dnUVZ_jidnZ2d(a)earthlink.com...
>>
>> "JWald" <wldj4(a)grics.net> wrote in message
>> news:hkcdiv02eil(a)enews6.newsguy.com...
>>> "Phildo" <Phil(a)phildo.net> wrote in message
>>> news:hk6i37$c6m$1(a)news.eternal-september.org...
>>>>
>>>> "Joe Kotroczo" <kotroczo(a)mac.com> wrote in message
>>>> news:C789D79D.AF361%kotroczo(a)mac.com...
>>>>> On 30/01/2010 01:40, in article hk02vp0147v(a)enews5.newsguy.com,
>>>>> "JWald"
>>>>> <wldj4(a)grics.net> wrote:
>>>>>
>>>>>> I guess I'm stupid. Are you suggesting a re-wire/jumping of the sub
>>>>>> input?
>>>>>> If so, 1+ to ?
>>>>>> Thanks.
>>>>>
>>>>> You can do it at the sub input, but you can do it also at the sub end
>>>>> of the
>>>>> cable, inside the Speakon connector.
>>>>>
>>>>> 1+ to 2+ and 1- to 2-.
>>>>
>>>> But be VERY sure to mark that cable.
>>>>
>>>> Phildo
>>>>
>>>
>>> Thanks. What are the concerns?
>>> --
>>> J Wald
>>>
>>> "You can lead a horticulture, but you can't make her think.... "
>
>> that you do not use it to feed a bi-amp box as pins 2+/2- feed the hf
>> drivers and ifyou have jumped 1+ to 2+ and 1- to 2- you will be feeding
>> lf content to hf driver, that is not good
>> george
>>
> Roger that.
> I guess I was thinking that the 1 side of the input was feeding both hi
> and low thru the internal x-over, and the 2 side was just there doing
> nothing. I shoulda' knowed better. Thanks.
>

it does in a passivly cross-overed box, the issue come into play when
BI-AMPing
george







From: JWald on
You guys ruined my week. I got out of bed Sunday morning vowing NOT to learn
one new thing until Saturday. Now I've learned two. Thanks a bunch. : )

--
J Wald

"You can lead a horticulture, but you can't make her think.... "
"George's Pro Sound Co." <bmoas(a)yahoo.com> wrote in message
news:BeOdneYHtJiEVvTWnZ2dnUVZ_g2dnZ2d(a)earthlink.com...
>
> "JWald" <wldj4(a)grics.net> wrote in message
> news:hkcftj02sp9(a)enews2.newsguy.com...
>> "George's Pro Sound Co." <bmoas(a)yahoo.com> wrote in message
>> news:c9udnTMhR4beJvTWnZ2dnUVZ_jidnZ2d(a)earthlink.com...
>>>
>>> "JWald" <wldj4(a)grics.net> wrote in message
>>> news:hkcdiv02eil(a)enews6.newsguy.com...
>>>> "Phildo" <Phil(a)phildo.net> wrote in message
>>>> news:hk6i37$c6m$1(a)news.eternal-september.org...
>>>>>
>>>>> "Joe Kotroczo" <kotroczo(a)mac.com> wrote in message
>>>>> news:C789D79D.AF361%kotroczo(a)mac.com...
>>>>>> On 30/01/2010 01:40, in article hk02vp0147v(a)enews5.newsguy.com,
>>>>>> "JWald"
>>>>>> <wldj4(a)grics.net> wrote:
>>>>>>
>>>>>>> I guess I'm stupid. Are you suggesting a re-wire/jumping of the sub
>>>>>>> input?
>>>>>>> If so, 1+ to ?
>>>>>>> Thanks.
>>>>>>
>>>>>> You can do it at the sub input, but you can do it also at the sub end
>>>>>> of the
>>>>>> cable, inside the Speakon connector.
>>>>>>
>>>>>> 1+ to 2+ and 1- to 2-.
>>>>>
>>>>> But be VERY sure to mark that cable.
>>>>>
>>>>> Phildo
>>>>>
>>>>
>>>> Thanks. What are the concerns?
>>>> --
>>>> J Wald
>>>>
>>>> "You can lead a horticulture, but you can't make her think.... "
>>
>>> that you do not use it to feed a bi-amp box as pins 2+/2- feed the hf
>>> drivers and ifyou have jumped 1+ to 2+ and 1- to 2- you will be feeding
>>> lf content to hf driver, that is not good
>>> george
>>>
>> Roger that.
>> I guess I was thinking that the 1 side of the input was feeding both hi
>> and low thru the internal x-over, and the 2 side was just there doing
>> nothing. I shoulda' knowed better. Thanks.
>>
>
> it does in a passivly cross-overed box, the issue come into play when
> BI-AMPing
> george
>
>
>
>
>
>
>