WLK 1.5: IO Cancellation with Direct IO on network storage (Pr
in [Device Drivers]
|
Prev: How to work with StorportLogSystemEvent
Next: get speed between device incorrect in Win7 with two controller
From: spazekaat on 17 Mar 2010 13:42 Hi Miki, I finally found out how to do that in the on-line help. The procedure which you described is there. However, I don't think that procedure should apply to me. I'm just testing a non-NDIS networking-over-USB driver we have. My client machine just connects to a USB gadget - the sole purpose for this is that the gadget supplies the proper VID/PID codes to satisfy the driver. Nothing more. No "storage" involved, and I'm not testing a NIC (as per the help document). This test NEVER showed up in Win 7 testing with WLK 1.4, and we have received WHQL certification for that. So, WHAT'S CHANGED in WLK 1.5, is this an erratum item, or can this erroneous "test not run" be filtered out in the submission summary? It looks like a bug to me. C'mon MSFT, PLEASE chime in any time....this is dragging out and we all could use your input. GLK "Miki" wrote: > Hello. > > I was able to pass "IO Cancellation with Direct IO on network storage > [Preview]" job. > > As follows was done. > > 1.I prepared DTM Client A(Local Machine) and DTM Client B(Remote > Machine). > 2.I installed my virtual NIC driver in both A and B. > 3.A and B was moved to the same Machine Pool. > 4.I was usually create submission. > 5.I choose "IO Cancellation with Direct IO on network storage > [Preview]", and clicked "Add Selected". > 6.Because dialog opened, I set the parameter that local/remote message/ > support device + remote machine. > 7.I was able to execute the job. > > regards, > Miki |