Prev: Flashlight for review
Next: Sample CAD 3D Models, 3D CAD Modeling Services at Low Cost
From: Joe788 on 15 Dec 2009 21:25
Funny how the total bullshit posted in these newsgroup about once a
shop has a CADCAM system it's almost impossible to change doesn't play
out in the real world. Mastercam was completely dumped by one of the
leading shops in San Diego and who has replaced Mastercam with Open
Mind Hypermill.

Further, DP Technology Esprit is being added by many shops who are
sick of Mastercam not being able to get the job done.

When you've had enough bullshit, spin, etc. suggest you check out the
Jon Banquer blog and find out why Mastercam fails miserably at doing
practical / real world multiple part simulation. New screen shots
added this morning show how easy it is to setup a tombstone and solid
cut part verify multiple parts in DP Technology Esprit with none of
the limitations that Mastercam has:

http://jonbanquer.wordpress.com/dp-technology-esprit-vs-mastercam-x4/

"Mastercam requires you to join all your individual .STL parts so they
make up one connected piece. Mastercam won’t simulate separate .STL
files all at once. DP Esprit has no such ridiculous limitation.
Simulating a tombstone with many different parts on it is easy in DP
Technology Esprit. It’s a exercise in frustration in Mastercam and
isn’t practical by any stretch of the imagination."

You can only find this kind of information on the Jon Banquer blog.
The Jon Banquer blog is the leading CAM-centric blog on the internet.

http://jonbanquer.wordpress.com/dp-technology-esprit-vs-mastercam-x4/

From: Cliff on 16 Dec 2009 10:34
On Tue, 15 Dec 2009 18:25:17 -0800 (PST), Joe788 <larryrozer(a)yahoo.com> wrote:

>Funny how the total bullshit posted in these newsgroup about once a
>shop has a CADCAM system it's almost impossible to change doesn't play
>out in the real world. Mastercam was completely dumped by one of the
>leading shops in San Diego and who has replaced Mastercam with Open
>Mind Hypermill.

What did the new employee Mom & Pop hired come with?

What do YOU use, if anything?
--
Cliff
From: Joe788 on 16 Dec 2009 13:06
On Dec 15, 6:25 pm, Joe788 <larryro...(a)yahoo.com> wrote:
> Funny how the total bullshit posted in these newsgroup about once a
> shop has a CADCAM system it's almost impossible to change doesn't play
> out in the real world. Mastercam was completely dumped by one of the
> leading shops in San Diego and who has replaced Mastercam with Open
> Mind Hypermill.
>
> Further, DP Technology Esprit is being added by many shops who are
> sick of Mastercam not being able to get the job done.
>
> When you've had enough bullshit, spin, etc. suggest you check out the
> Jon Banquer blog and find out why Mastercam fails miserably at doing
> practical / real world multiple part simulation. New screen shots
> added this morning show how easy it is to setup a tombstone and solid
> cut part verify multiple parts in DP Technology Esprit with none of
> the limitations that Mastercam has:
>
> http://jonbanquer.wordpress.com/dp-technology-esprit-vs-mastercam-x4/
>
> "Mastercam requires you to join all your individual .STL parts so they
> make up one connected piece. Mastercam won’t simulate separate .STL
> files all at once. DP Esprit has no such ridiculous limitation.
> Simulating a tombstone with many different parts on it is easy in DP
> Technology Esprit. It’s a exercise in frustration in Mastercam and
> isn’t practical by any stretch of the imagination."
>
> You can only find this kind of information on the Jon Banquer blog.
> The Jon Banquer blog is the leading CAM-centric blog on the internet.
>
> http://jonbanquer.wordpress.com/dp-technology-esprit-vs-mastercam-x4/

136,000 installs, and you can't even list 10 examples of people who
"dumped" Mastercam? Or essentially, you don't even know if .0001% of
the user base has "dumped" Mastercam.

How about 5 shops that have dumped it, Jon? Can you list 5? That's
still not even .00005% of users.

I wish I could be a fly on the wall in your shrink's office. It's
gotta be quite something.
First  |  Prev  | 
Pages: 1 2 3 4
Prev: Flashlight for review
Next: Sample CAD 3D Models, 3D CAD Modeling Services at Low Cost