From: Meindert Sprang on 27 Jan 2010 04:03 "John Speth" <johnspeth(a)yahoo.com> wrote in message news:hjne4i$19nr$1(a)adenine.netfront.net... > >> > We are looking a low-cost WiFi modules for our embedded ARM9-based > >> > products. The module is better to have everything inside, so we just to > >> > connect and use it as a blackbox. Anyway we are open to modify our > >> > firmware to provide essential supports for this WiFi module. Could > > anybody > >> > recommend one? > >> > >> Lantronix makes/sells the WiPort and others which meet all your stated > >> requirements. > > > > Except the "low-cost" bit.... > > It is low cost, compared to a higher cost. The cost target wasn't stated in > absolute terms. So I was right. :) Ok ok..... but compared to an off the shelf Wifi router, these modules aren't low cost and I have a hard time telling my customers why the end user price of a Wifi enabled device I produce is 10 times the price of an off the shelf router. Meindert
From: Joe G (Home) on 27 Jan 2010 08:06 "John Speth" <johnspeth(a)yahoo.com> wrote in message news:hjl5j8$11od$1(a)adenine.netfront.net... >> We are looking a low-cost WiFi modules for our embedded ARM9-based >> products. The module is better to have everything inside, so we just to >> connect and use it as a blackbox. Anyway we are open to modify our >> firmware to provide essential supports for this WiFi module. Could >> anybody recommend one? > ZeroG WiFi just puchased by Microchip?
From: John Speth on 27 Jan 2010 12:13 > Ok ok..... but compared to an off the shelf Wifi router, these modules > aren't low cost and I have a hard time telling my customers why the end > user > price of a Wifi enabled device I produce is 10 times the price of an off > the > shelf router. Yes. I agree with you. Price is the #1 problem with anything from Lantronix. JJS --- news://freenews.netfront.net/ - complaints: news(a)netfront.net ---
From: Theo Markettos on 27 Jan 2010 17:37 Johnson <gpsabove(a)yahoo.com> wrote: > We are looking a low-cost WiFi modules for our embedded ARM9-based > products. The module is better to have everything inside, so we just to > connect and use it as a blackbox. Anyway we are open to modify our > firmware to provide essential supports for this WiFi module. Could > anybody recommend one? I'm guessing you want to write minimal software, but another option might be a USB port, a USB wifi dongle, and a wifi stack. Might work out cheaper if you have the volume to make the software work worthwhile. Theo
First
|
Prev
|
Pages: 1 2 Prev: ucontrollers (AVR/ATMega) and radio transceiver modules Next: Efficient methods |