Prev: EMC SymCLI - RBAC for symclone error: Access denied - you are not an authorized base daemon user
Next: Solaris 10 x86 installation problem
From: chriseas on 18 Jul 2008 05:30
On 18 Jul, 03:37, ndjilinski <ndjilin...(a)gmail.com> wrote:
> try to have a look at netstat -i 1 (or -I int-name 1) - look at
> possible errors
> then - tail -f /var/adm/messages | grepnxge
>
> and - look at recent patches fornxge

Thanks for the advice everybody.

I've got all the latest patches. Also checked for errors (NIC,TCP and
NFS) and not found anything.
We originally replaced the quad gig trunk with this card because the
system is a backup machine and
we often want it to read from a single NAS device as quickly as
possible.

Does anybody know the settings that should go in /etc/system for this
card.
It's a V445 with 4 UltraSPARC-IIIi procs, 8192 Megabytes RAM

I've tries setting soft-lso-enable on and off in nxge.conf after
seeing this:

http://blogs.sun.com/puresee/category/Sun

I've found a fair amount of tuning advice on the web, but nothing for
this particular hardware combo.


-c
First  |  Prev  | 
Pages: 1 2
Prev: EMC SymCLI - RBAC for symclone error: Access denied - you are not an authorized base daemon user
Next: Solaris 10 x86 installation problem